Optimized removal of Reactive Navy Blue SP-BR by organo-montmorillonite based adsorbents through central composite design
Source abstract
Abstract
Abstract In this study, the Montmorillonite K10 (MMT-K10) was activated by sulfuric acid, followed by modification with cetyltrimethylammonium bromide (CTAB). The central composite design (CCD) was applied to optimize the activation process of MMT-K10. The effects of activation parameters (acid concentration, temperature, and contact time) on the decolorization efficiency of MMT-K10 (R%) were studied, and the optimum conditions were defined. The optimum values of input variables were found to be 50 °C (temperature), 3.6 mol/L (acid concentration) and 2.2 h (contact time). The predicted and experimental values of responses were in reasonable agreement with each other (R 2 = 0.968 and adj-R 2 = 0.940). The activated and modified MMT-K10 was characterized by FTIR, XRD, SEM and TEM techniques. The FT-IR analysis confirmed that acid-activation and modification caused the intercalation of CTAB in MMT-K10 layers and increase in specific surface area.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Adsorption and biosorption for pollutant removal · Water Quality Monitoring and Analysis · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Optimization of C.I. Acid Red 14 azo dye removal by electrocoagulation batch process with response surface methodology10.1016/j.cep.2007.01.033 ↗
2. Removal of methylene blue from colored effluents by adsorption on montmorillonite clay10.1016/j.jcis.2008.12.012 ↗
3. Metal removal through synergic coagulation-flocculation using an optimized chitosan-montmorillonite system10.1016/j.clay.2007.02.007 ↗
4. Kinetic model for the isothermal activation of bentonite by sulfuric acid10.1016/j.matchemphys.2007.09.034 ↗
5. Colza oil bleaching through optimized acid activation of bentonite. A comparative study10.1016/j.clay.2008.03.014 ↗
6. Investigation of a basic dye removal from aqueous solution onto chemically modified Unye bentonite10.1016/j.jhazmat.2008.11.011 ↗
7. Influence of exchangeable cation of smectite on HDTMA adsorption: equilibrium, kinetic and thermodynamic studies10.1016/j.clay.2011.11.011 ↗
8. Surface acidities and catalytic activities of acid-activated clays10.1016/j.molcata.2003.11.013 ↗
9. Changes in the morphology of organoclays with HDTMA+ surfactant loading10.1016/j.clay.2005.10.011 ↗
10. Changes in the morphology of organoclays with HDTMA+ surfactant loading10.1016/j.clay.2005.10.011 ↗
11. Comparison of modified montmorillonite adsorbents Part II: the effects of the type of raw clays and modification conditions on the adsorption performance10.1016/S0045-6535(03)00449-1 ↗
12. Modeling and optimization of heterogeneous photo-Fenton process with response surface methodology and artificial neural networks10.1021/es801372q ↗
13. Optimization of UV-promoted peroxydisulphate oxidation of C.I. Basic Blue 3 using response surface methodology10.1080/09593330903358302 ↗
14. Optimization of photocatalytic treatment of dye solution on supported TiO2 nanoparticles by central composite design: intermediates identification10.1016/j.jhazmat.2010.05.096 ↗
15. Reaction of acid activated montmorillonites with hexadecyl trimethylammonium bromide solution10.1016/j.clay.2008.10.006 ↗
16. Optimal decolorization efficiency of Reactive Red 239 by UV/TiO2 photocatalytic process coupled with response surface methodology10.1016/j.cej.2005.07.012 ↗
17. Sorption of alkylammonim cations on montmorillonite
18. The effect of sulphuric acid activation on the crystallinity, surface area, porosity, surface acidity, and bleaching power of a bentonite10.1016/j.foodchem.2007.03.060 ↗
19. Swelling and cation exchange capacity relationship for the samples obtained from a bentonite by acid activations and heat treatments10.1016/j.clay.2006.12.004 ↗
20. Preparation and characterization of acid-activated bentonite powders10.1016/j.powtec.2006.10.034 ↗
21. Modification of bentonite with a cationic surfactant: an adsorption study of textile dye Reactive Blue 1910.1016/j.jhazmat.2006.06.138 ↗
22. Organoclays: properties, preparation and applications10.1016/j.clay.2008.02.006 ↗
23. Nanoclay syntactic foam composites—high strain rate properties10.1016/j.msea.2008.04.009 ↗
24. Alteration of swelling clay minerals by acid activation10.1016/j.clay.2009.02.002 ↗
25. Effective and selective nitrate electroreduction into nitrogen through synergistic parameter interactions10.1016/j.electacta.2011.09.044 ↗
26. Adsorption of basic dyes from single and binary component systems onto bentonite: simultaneous analysis of Basic Red 46 and Basic Yellow 28 by first order derivative spectrophotometric analysis method10.1016/j.jhazmat.2008.01.033 ↗
27. Determination of structural modification in acid activated montmorillonite clay by FT-IR spectroscopy10.1016/j.saa.2005.07.018 ↗
28. Modification of montmorillonite with cationic surfactants. Thermal and chemical analysis including CEC determination10.1016/j.clay.2007.10.001 ↗
29. Application of response surface methodology for optimization of peroxi-coagulation of textile dye solution using carbon nanotube-PTFE cathode10.1016/j.jhazmat.2009.08.120 ↗
30. Adsorption of Direct Red 2 on bentonite modified by cetyltrimethylammonium bromide10.1016/j.cej.2007.03.086 ↗