journal article·2005-07

Synthesis and Kinetics for Nanocrystalline Titanium Carbide upon Metallothermic Reduction of Liquid Chlorides

D. W. Lee, S. V. Alexandrovskii, O. V. Tolochko, D. Kim, B. K. Kim

Glass Physics and Chemistry· Volume 31· Issue 4
Publisher page

Abstract

Nanosized titanium carbide particles were synthesized by the reaction of liquid magnesium and vaporized TiCl4 + CxCl4 (x = 1, 2) solution. Fine titanium carbide particles about 50 nm in size were successfully produced by combining Ti and C atoms released by the chloride reduction of magnesium, and a vacuum was then used to remove the residual phases of MgCl2 and excess Mg. Small amounts of impurities such as O, Fe, Mg, and Cl were detected in the product, but such a problem can be solved by more precise control of the process. The lattice parameter of the product was 0.43267 nm, which is near the standard value. With respect to the reaction kinetics, the activation energy for the reactions of TiCl4 + C2Cl4 and Mg was found to be 69 kJ/mol, which was about half of the value of the reaction with TiCl4 + CCl4, and the higher reactivity of the former contributed to an increase in the stoichiometry to the level of TiC0.96 and to a decrease in the free carbon content to below 0.3 wt %.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. Durlu, N., Titanium Carbide Based Composites for High-Temperature Applications, J. Eur. Ceram. Soc., 1999, vol. 19, pp. 2415–2419.10.1016/S0955-2219(99)00101-6 ↗
2. Goetzel, C.G., Cermets (ASM Handbook), Materials Park (Ohio): The American Society for Metals, 1993, vol. 7, pp. 799–815.
3. Preiss, H., Berger, L.M., and Schultze, D., Studies on the Carbothermal Preparation of Titanium Carbide from Different Gel Precursors, J. Eur. Ceram. Soc., 1999, vol. 19, pp. 195–206.10.1016/S0955-2219(98)00190-3 ↗
4. Welham, N.J. and Llewellyn, D.J., Formation of Nanometric Hard Materials by Cold Milling, J. Eur. Ceram. Soc., 1999, vol. 19, pp. 2833–2841.10.1016/S0955-2219(99)00071-0 ↗
5. Maitre, A., Tetard, D., and Lefort, P., Role of Some Technological Parameters during Carburizing Titanium Dioxide, J. Eur. Ceram. Soc., 2000, vol. 20, pp. 15–22.10.1016/S0955-2219(99)00074-6 ↗
6. Ren, R.M., Yang, Z.G., and Shaw, L.L., Synthesis of Nanostructured TiC via Carbothermic Reduction Enhanced by Mechanical Activation, Scr. Mater., 1998, vol. 38, pp. 735–741.10.1016/S1359-6462(97)00552-6 ↗
7. Lee, D.W. and Kim, B.K., Synthesis of Nano-Structured Titanium Carbide by Mg-Thermal Reduction, Scr. Mater., 2003, vol. 48, pp. 1513–1518.10.1016/S1359-6462(03)00130-1 ↗
8. Halander, T. and Tolochko, O.V., An Experimental Investigation of Possible B2-Ordering in the Al-Cr System, J. Phase Equilib., 1999, vol. 20, no.1, pp. 57–60.10.1361/105497199770335947 ↗