Temperature effect on chromium(VI) removal by Mg/Al mixed metal oxides as adsorbents
Source abstract
Abstract
Abstract Temperature plays a major role in Cr(VI) adsorption although the underlying mechanisms are still unclear. The aim of this study was to determine the relationship among the temperature, adsorption properties and microstructure characteristics. In this work, the calcined Mg/Al hydrotalcites (MMO) as adsorbents were investigated for the Cr(VI) removal in aqueous solution. The effect of calcination and adsorption temperatures on the Cr(VI) removal of the MMO was studied based on the aspects of the microstructure characteristics and adsorption properties. The results showed that the sample calcined at 500 °C (MMO500) had the largest adsorption capacity of 94.64 mg·g − 1 for Cr(VI). For MMO500 as an adsorbent, the experiment data were fitted well into Langmuir isotherm model and pseudo-second-order kinetic model. Combined with thermodynamic analysis, the activation energy (22.42 kJ·mol − 1 ) suggested that the adsorption process was chemisorption nature and diffusion was the rate limiting step. The further research showed that the film diffusion was more dominant than the intra-particle diffusion. The results demonstrated that the MMO500 was a promising adsorbent in the Cr(VI) pollution control.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Layered Double Hydroxides Synthesis and Applications · Phosphorus and nutrient management · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Adsorption of Cr(VI) from synthetic solutions and electroplating wastewaters on amorphous aluminium oxide10.1016/j.jhazmat.2006.08.004 ↗
2. Thermodynamics and kinetics of adsorption of Cu(II) from aqueous solutions onto a new cation exchanger derived from tamarind fruit shell10.1016/j.jct.2007.10.005 ↗
3. Adsorption of methyl orange and Cr(VI) on mesoporous TiO2 prepared by hydrothermal method10.1016/j.jhazmat.2010.04.117 ↗
4. A comparative study between chloride and calcined carbonate hydrotalcites as adsorbents for Cr(VI)10.1016/j.clay.2007.01.006 ↗
5. Hydrotalcite-type anionic clays: preparation, properties and applications10.1016/0920-5861(91)80068-K ↗
6. Highly selective and efficient removal of Cr(VI) and Cu(II) by the chromotropic acid-intercalated Zn–Al layered double hydroxides10.1021/ie400108t ↗
7. Basic properties of Mg2+1−xAl3+x layered double hydroxides intercalated by carbonate, hydroxide, chloride, and sulfate anions10.1021/ic00108a020 ↗
8. Kinetics, isotherm and thermodynamics for Cr(III) and Cr(VI) adsorption from aqueous solutions by crystalline hydrous titanium oxide10.1016/j.jct.2007.05.014 ↗
9. A study of structural memory effects in synthetic hydrotalcites using environmental SEM10.1016/j.matlet.2004.08.035 ↗
10. Removal of Cr(VI) from aqueous solution by Eichhornia crassipes root biomass-derived activated carbon10.1016/j.cej.2012.01.025 ↗
11. Application of layered double hydroxides for removal of oxyanions: a review10.1016/j.watres.2007.10.043 ↗
12. Adsorption of Cr(VI) in layered double hydroxides10.1016/S0169-1317(98)00010-6 ↗
13. Enhanced adsorption of acid brown 14 dye on calcined Mg/Fe layered double hydroxide with memory effect10.1016/j.cej.2012.12.084 ↗
14. Hydrotalcite as sorbent for trinitrophenol: sorption capacity and mechanism10.1016/0043-1354(95)00088-3 ↗
15. Removal and recovery of Cr(VI) from wastewater by maghemite nanoparticles10.1016/j.watres.2005.05.051 ↗
16. Preparation, characterization and enhanced adsorption performance for Cr(VI) of mesoporous NiFe2O4 by twice pore-forming method10.1016/j.matchemphys.2012.07.019 ↗
17. Effective concentration of dichromate anions using layered double hydroxides from acidic solutions10.1016/j.clay.2012.11.011 ↗
18. Effect of composition on the physicochemical properties of nickel aluminium hydrotalcites10.1007/BF01152946 ↗
19. The effects of synthesis pH and hydrothermal treatment on the formation of zinc aluminum hydrotalcites10.1016/j.jssc.2004.07.010 ↗
20. Adsorption of Cr(VI) from textile waste water by using natural bentonite
21. Highly crystalline activated layered double hydroxides as solid acid‐base catalysts10.1002/aic.11118 ↗
22. Studies on intrinsic ionization constants of Fe–Al–Mg hydrotalcite-like compounds10.1016/S0021-9797(02)00062-0 ↗
23. Adsorption behavior of Cr(VI) ions on tannin-immobilized activated clay
24. Ultrasound assisted synthesis of Ca–Al hydrotalcite for U(VI) and Cr(VI) adsorption10.1016/j.cej.2012.12.051 ↗
25. Investigating the effects of guest–host Interactions on the properties of anion-exchanged Mg–Al hydrotalcites10.1006/jssc.2000.8922 ↗
26. Removal of nitrate–nitrogen from drinking water using bamboo powder charcoal10.1016/j.biortech.2004.02.015 ↗
27. Adsorption of Acid Blue 193 from aqueous solutions onto DEDMA-sepiolite10.1016/j.jhazmat.2005.08.037 ↗
28. Influence of the divalent cation on the thermal activation and reconstruction of hydrotalcite-like compounds10.1021/jp064972q ↗
29. Adsorption of Cu2+, Cd2+ and Pb2+ ions by layered double hydroxides intercalated with the chelating agents diethylenetriaminepentaacetate and meso-2, 3-dimercaptosuccinate10.1016/j.clay.2008.07.020 ↗
30. Adsorption isotherm studies of chromium(VI) from aqueous solutions using sol–gel hydrotalcite-like compounds10.1016/j.jhazmat.2009.08.023 ↗
31. Thermal decomposition of hydrotalcites. An infrared and nuclear magnetic resonance spectroscopic study. Journal of the Chemical Society10.1039/FT9928802233 ↗
32. Determination of the biosorption heats of heavy metal ions on Zoogloea ramigera and Rhizopus arrhizus10.1016/S1369-703X(00)00083-8 ↗
33. Science and technology for water purification in the coming decades10.1038/nature06599 ↗
34. Kinetics and equilibrium modeling of Se(IV) removal from aqueous solutions using metal oxides10.1016/j.cej.2010.03.004 ↗
35. Development of a heavy metals enzymatic-based assay using papain10.1016/j.aca.2006.03.001 ↗
36. Removal of Cr(VI) from industrial wastewaters by adsorption: Part I: determination of optimum conditions10.1016/j.jhazmat.2007.04.019 ↗
37. Kinetic study and equilibrium isotherm analysis of Congo Red adsorption by clay materials10.1016/j.cej.2008.09.009 ↗
38. Sorption of nonpolar and polar compounds to soils: processes, measurements and experience with the applicability of the modified OECD-Guideline 10610.1016/0045-6535(91)90318-8 ↗
39. Adsorption of reactive dye onto carbon nanotubes: equilibrium, kinetics and thermodynamics10.1016/j.jhazmat.2006.09.083 ↗
40. The influence of ferric iron in calcined nano-Mg/Al hydrotalcite on adsorption of Cr(VI) from aqueous solution10.1016/j.jhazmat.2010.11.052 ↗
41. Adsorption of toluene, ethylbenzene and m-xylene on multi-walled carbon nanotubes with different oxygen contents from aqueous solutions10.1016/j.jhazmat.2011.06.048 ↗
42. Removal of hexavalent chromium [Cr(VI)] from aqueous solutions by the diatomite-supported/unsupported magnetite nanoparticles10.1016/j.jhazmat.2009.08.129 ↗
43. Activation of Mg–Al hydrotalcite catalysts for transesterification of rape oil10.1016/j.fuel.2008.04.001 ↗
44. Synthesis of propylene glycol monomethyl ether over Mg/Al hydrotalcite catalyst10.1007/s10562-010-0335-y ↗
45. Preparation of Mg–Al hydrotalcite by urea method and its catalytic activity for transesterification10.1002/aic.11722 ↗