Synthesis of light olefins from CO2 hydrogenation over (CuO-ZnO)-kaolin/SAPO-34 molecular sieves
Source abstract
Abstract
Abstract Cu Zn oxide/SAPO-34 molecular sieves was used as bifunctional catalyst for the direct synthesis of light olefins from CO2 and H2, but the production of SAPO-34 molecular sieves required high cost and the Cu Zn oxide (CuO-ZnO) particles were prone to sintering, which severely restricted its industrial application. Herein, kaolin was used as raw material to prepare SAPO-34 molecular sieves and as supports to prepare kaolin-supported CuO-ZnO catalysts. The samples were characterized by X-ray diffraction, Scanning Electron Microscope, Energy Dispersive Spectroscopy, N2 sorption, H2 temperature programmed reduction, NH3 temperature programmed desorption and Fourier Transforms Infrared spectra techniques. The results showed that the SAPO-34 molecular sieves presented lamellar structure and the CuO-ZnO particles were well dispersed on the surface of kaolin. The results of catalytic reaction for the direct synthesis of light olefins from CO2 and H2 indicated that the (CuO-ZnO)-kaolin/SAPO-34 molecular sieves could enhance not only the yield of light olefins, but also the lifetime.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Zeolite Catalysis and Synthesis · Catalysts for Methane Reforming · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Enhancement of catalytic lifetime of nanostructured SAPO-34 in conversion of biomethanol to light olefins10.1016/j.micromeso.2014.05.011 ↗
2. Effect of crystallization time on properties and catalytic performance of nanostructured SAPO-34 molecular sieve synthesized at high temperatures for conversion of methanol to light olefins10.1016/j.powtec.2014.09.036 ↗
3. Small-pore molecular sieves SAPO-57 and SAPO-59: synthesis, characterization, and catalytic properties in methanol-to-olefins conversion10.1039/C5CY02103K ↗
4. Microwave-assisted synthesis of plate-like SAPO-34 nanocrystals with increased catalyst lifetime in the methanol-to-olefin reaction10.1039/C4CY00775A ↗
5. Dimethyl ether synthesis from CO2 hydrogenation on a CuO-ZnO-Al2O3-ZrO2/HZSM-5 bifunctional catalyst10.1021/ie800777t ↗
6. Conventional versus alkali fusion synthesis of zeolite a from low grade kaolin10.1016/j.clay.2016.07.019 ↗
7. Carbon nanotubes supported cu-Ni bimetallic catalysts and their properties for the direct synthesis of dimethyl carbonate from methanol and carbon dioxide10.1016/j.apsusc.2009.03.057 ↗
8. A comparative study of acidic properties of SAPO-5, −11, −34 and −37 molecular sieves10.1016/0304-5102(93)E0262-F ↗
9. Opportunities and prospects in the chemical recycling of carbon dioxide to fuels10.1016/j.cattod.2009.07.075 ↗
10. Influence of trivalent metal ions on the surface structure of a copper-based catalyst for methanol synthesis10.1016/S0169-4332(99)00081-1 ↗
11. Spatial confinement effects of cage-type SAPO molecular sieves on product distribution and coke formation in methanol-to-olefin reaction10.1016/j.catcom.2013.11.016 ↗
12. Pore-structure-mediated hierarchical SAPO-34: facile synthesis, tunable nanostructure, and catalysis applications for the conversion of dimethyl ether into olefins10.1016/j.partic.2012.12.009 ↗
13. XPS studies of cu/ZnO/Al2O3 ultra-fine catalysts derived by a novel gel oxalate co-precipitation for methanol synthesis by CO2 + H210.1016/S0169-4332(01)00229-X ↗
14. Mechanisms of the deactivation of SAPO-34 materials with different crystal sizes applied as MTO catalysts10.1021/cs400007v ↗
15. CO2 hydrogenation to methanol using Cu-Zn catalyst supported on reduced graphene oxide nanosheets10.1016/j.jcou.2016.07.002 ↗
16. Effect of magnetic field on CO2 conversion over Cu-ZnO/ZrO2 catalyst in hydrogenation reaction10.1016/j.jcou.2016.07.007 ↗
17. Microwave assisted growth of SAPO-34 on β-SiC foams for methanol dehydration to dimethyl ether10.1016/j.cej.2015.03.118 ↗
18. A graphene-supported copper-based catalyst for the hydrogenation of carbon dioxide to form methanol10.1016/j.jcou.2016.07.001 ↗
19. Fluorinated Cu/Zn/Al/Zr hydrotalcites derived nanocatalysts for CO2 hydrogenation to methanol10.1016/j.jcou.2016.06.001 ↗
20. The influence of La doping on the catalytic behavior of cu/ZrO2 for methanol synthesis from CO2 hydrogenation10.1016/j.molcata.2011.05.019 ↗
21. Effect of SAPO-34's composition on its physico-chemical properties and deactivation in MTO process10.1016/j.apcata.2009.05.022 ↗
22. Turning carbon dioxide into fuel10.1098/rsta.2010.0119 ↗
23. Influence of Ga addition on the methanol synthesis activity of cu/ZnO catalyst in the presence and absence of alumina10.1016/j.jiec.2009.09.041 ↗
24. Attrition resistance and catalytic performance of spray-dried SAPO-34 catalyst for MTO process: effect of catalyst phase and acidic solution10.1016/j.jiec.2011.05.009 ↗
25. Comparative study of MTO conversion over SAPO-34, H-ZSM-5 and H-ZSM-22: correlating catalytic performance and reaction mechanism to zeolite topology10.1016/j.cattod.2011.02.027 ↗
26. Synthesis of dimethyl ether from CO2 and H2 using a cu-Fe-Zr/HZSM-5 catalyst system10.1021/ie401763g ↗
27. Preparation of HZSM-5 membrane packed CuO-ZnO-Al2O3 nanoparticles for catalysing carbon dioxide hydrogenation to dimethyl ether10.1016/j.apsusc.2015.03.125 ↗
28. Methanol synthesis from CO2 hydrogenation over copper catalysts supported on MgO-modified TiO210.1016/j.molcata.2016.09.032 ↗
29. Tri-templates synthesis of SAPO-34 and its performance in MTO reaction by statistical design of experiments10.1016/j.apcata.2014.12.033 ↗
30. Synthesis of ZSM-5 from impure and beneficiated Grahamstown kaolin: effect of kaolinite content, crystallisation temperatures and time10.1016/j.clay.2015.10.008 ↗
31. Core-shell structured CuO-ZnO@H-ZSM-5 catalysts for CO hydrogenation to dimethyl ether10.1016/j.fuel.2011.12.048 ↗
32. CO2 hydrogenation to methanol and dimethyl ether by Pd-Pd2Ga catalysts supported over Ga2O3 polymorphs10.1016/j.jcou.2014.11.003 ↗
33. Designing core (Cu/ZnO/Al2O3)-shell (SAPO-11) zeolite capsule catalyst with a facile physical way for dimethyl ether direct synthesis from syngas10.1016/j.cej.2015.02.071 ↗
34. Hydrogenation of CO2 to dimethyl ether on La-, Ce-modified Cu-Fe/HZSM-5 catalysts10.1016/j.catcom.2015.12.010 ↗
35. Direct synthesis of mesoporous aluminosilicates from Indonesian kaolin clay without calcination10.1016/j.clay.2015.10.007 ↗
36. The effects of SiO2/Al2O3 and H2O/Al2O3 molar ratios on SAPO-34 catalysts in methanol to olefins (MTO) process using experimental design10.1016/j.jiec.2015.12.015 ↗
37. Methanol synthesis from CO2 hydrogenation over Cu/γ-Al2O3 catalysts modified by ZnO, ZrO2 and MgO10.1016/j.jiec.2015.03.001 ↗
38. Improvement of light olefins selectivity and catalyst lifetime in MTO reaction; using Ni and Mg-modified SAPO-34 synthesized by combination of two templates10.1016/j.jiec.2011.05.031 ↗
39. MTO reaction over SAPO-34 catalysts synthesized by combination of TEAOH and morpholine templates and different silica sources10.1016/j.scient.2012.04.019 ↗
40. Light olefin synthesis from CO2 hydrogenation over K-promoted Fe-Co bimetallic catalysts10.1016/j.cattod.2015.01.011 ↗
41. Mesoporous silica derived from kaolin: specific surface area enlargement via a new zeolite-involved template-free strategy10.1016/j.clay.2016.01.009 ↗
42. The methyl halide to hydrocarbon reaction over H-SAPO-3410.1016/j.jcat.2006.04.013 ↗
43. Methanol to olefins (MTO): from fundamentals to commercialization10.1021/acscatal.5b00007 ↗
44. In situ synthesis of SAPO-34 grown onto fully calcined kaolin microspheres and its catalytic properties for the MTO reaction10.1021/ie201060u ↗
45. Synthesis of SAPO-34 with small and tunable crystallite size by two-step hydrothermal crystallization and its catalytic performance for MTO reaction10.1016/j.cattod.2012.08.027 ↗
46. Synthesis of dimethyl ether from syngas over core-shell structure catalyst CuO-ZnO-Al2O3@SiO2-Al2O310.1016/j.cej.2014.04.018 ↗
47. Similarities and differences between aromatic-based and olefin-based cycles in H-SAPO-34 and H-SSZ-13 for methanol-to-olefins conversion: insights from energetic span model10.1039/C5CY00483G ↗
48. A reconstruction strategy to synthesize mesoporous SAPO molecular sieve single crystals with high MTO catalytic activity10.1039/C6CC01834C ↗
49. Catalytic conversion of CO2 to value added fuels: current status, challenges, and future directions10.1016/S1872-2067(16)62455-5 ↗
50. Effect of TiO2, ZrO2, and TiO2-ZrO2 on the performance of CuO-ZnO catalyst for CO2 hydrogenation to methanol10.1016/j.apsusc.2015.02.122 ↗
51. Confinement effect and synergistic function of H-ZSM-5/Cu-ZnO-Al2O3 capsule catalyst for one-step controlled synthesis10.1021/ja101882a ↗
52. Synthesis of SAPO-34 nanoplates via hydrothermal method10.1016/j.micromeso.2015.12.017 ↗
53. Cu-Zn-Al oxide cores packed by metal-doped amorphous silica-alumina membrane for catalyzing the hydrogenation of carbon dioxide to dimethyl ether10.1021/ie202090f ↗
54. Investigations of formation of molecular sieve SAPO-3410.1021/jp208560t ↗
55. Selective formation of light olefins from CO2 hydrogenation over Fe-Zn-K catalysts10.1016/j.jcou.2015.05.004 ↗
56. Preparation and CO2 hydrogenation catalytic properties of alumina microsphere supported Cu-based catalyst by deposition-precipitation method10.1016/j.jcou.2016.11.015 ↗
57. CuO-Fe2O3-CeO2/HZSM-5 bifunctional catalyst hydrogenated CO2 for enhanced dimethyl ether synthesis10.1016/j.ces.2016.07.007 ↗
58. Direct synthesis of hierarchical zeolite from a natural layered material
59. CO2 emissions, renewable energy and the environmental Kuznets curve, a panel cointegration approach10.1016/j.rser.2016.10.018 ↗