journal article·2011-05

Utilization of sepiolite in the synthesis of porous cordierite ceramics

Jian-er Zhou, Yingchao Dong, Stuart Hampshire, Guangyao Meng

Applied Clay Science· Volume 52· Issue 3
Publisher page

Abstract

Abstract Porous cordierite ceramics were prepared using sepiolite source of MgO and SiO2 and alumina as starting materials by simple dry-pressing/sintering. The sepiolite/alumina green bodies were sintered at 1100–1350 °C for 2 h. The characterization was focused on thermal analysis, phase evolution, sintering behavior, thermal expansion and micro-structural changes using DSC/TG, XRD, dilatometry and SEM. α-Cordierite was formed above 1200 °C, the amount of which increased steadily with the sintering temperature. Increasing sintering temperature also improved the densification (especially above1000 °C), and decreased the thermal expansion (especially above 1200 °C). Porous cordierite with a bimodal pore size distribution (1.4–1.9 μm and 10 μm) was prepared with cornstarch as pore-former.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Processing of porous cordierite bodies by starch consolidation10.1016/S0025-5408(98)00131-7 ↗
2. Synthesis and characterization of cordierite ceramic from Morocca stevensite and andalusite10.1016/j.clay.2010.06.004 ↗
3. Preparation and characterization of tubular ceramic membranes for treatment of oil emulsions10.1016/j.jeurceramsoc.2004.06.016 ↗
4. Evidence for and calculation of micro-strain in porous synthetic cordierite10.1016/j.scriptamat.2010.04.008 ↗
5. Sintering of cordierite based materials10.1016/S0272-8842(02)00100-1 ↗
6. Functionalized sepiolite for heavy metal ions adsorption10.1016/j.desal.2007.11.029 ↗
7. Preparation of cordierite-based porous ceramic micro-filtration membranes using waste fly ash as the main raw materials10.1016/j.memsci.2006.08.032 ↗
8. Recycling of fly ash for preparing porous mullite membrane supports with titania addition10.1016/j.jhazmat.2010.04.010 ↗
9. Synthesis of cordierite powder by spray drying10.1016/S0022-3093(05)80675-1 ↗
10. Thermal expansions and chemical modifications of cordierite10.1111/j.1151-2916.1980.tb09850.x ↗
11. Chemical analysis of used three-way catalysts by total reflection X-ray fluorescence10.1021/ac025927r ↗
12. Controlled rate thermal analysis and differential scanning calorimetry of sepiolites and palygorskites10.1016/S0040-6031(02)00228-9 ↗
13. Preparation and characterization of cordierite powders10.1016/j.jeurceramsoc.2006.04.089 ↗
14. Combustion synthesis, characterization, sintering and microstructure of mullite–cordierite
15. Magnesia–ammonium phosphate-bonded cordierite refractory castables: phase evolution on heating and mechanical properties10.1016/S0008-8846(03)00256-4 ↗
16. Solution combustion synthesis of α-cordierite10.1016/j.jallcom.2009.02.022 ↗
17. Preparation of dense cordierite ceramics from magnesium compounds and kaolinite without additives10.1016/S0272-8842(00)00013-4 ↗
18. CuO supported on Al2O3-coated cordierite-honeycomb for SO2 and NO removal from flue gas: effect of acid treatment of the cordierite10.1021/ie048881w ↗
19. Regeneration of Al2O3-coated cordierite supported CuO for simultaneous SO2 and NO removal10.1021/ie049414h ↗
20. A phenomenological theory of sintering
21. Mechanism of cordierite formation obtained by the sol–gel technique10.1016/j.matlet.2005.04.014 ↗
22. Thermal expansion of cordierite10.1111/j.1151-2916.1977.tb15563.x ↗
23. Cristobalite formation from thermal treatment of Texas lignite fly ash10.1016/S0016-2361(99)00057-5 ↗
24. On dehydration of bound water of sepiolite10.1346/CCMN.1974.0220310 ↗
25. Mechanical and thermal behaviour of cordierite–zirconia composites10.1016/S0272-8842(01)00061-X ↗
26. Extrusion of alumina and cordierite-based tubes containing Al-rich anodising sludge10.1016/j.jeurceramsoc.2005.07.040 ↗
27. Elaboration and properties of TiO2–ZnAl2O4 ultrafiltration membranes deposited on cordierite support10.1016/S1383-5866(03)00203-X ↗
28. Constitution of laser melted Al2O3–MgO–SiO2 ceramics10.1179/mst.1995.11.9.863 ↗
29. Effect of substitution of Ca on thermal expansion of cordierite (Mg2Al4Si5O18)10.1111/j.1151-2916.1993.tb06664.x ↗
30. Kaolin-based cordierite for pollution control10.1016/S0955-2219(03)00269-3 ↗
31. Synthesis, sintering and thermal shock resistance estimation of porous cordierite by IR heating technique10.1016/j.micromeso.2005.06.011 ↗
32. Cordierite-supported ZSM-5 membrane: preparation and pervaporation properties in the dehydration of water–alcohol mixture10.1016/j.seppur.2004.12.016 ↗