journal article·2016-11

Moisture absorption, thermal conductivity and noise mitigation of clay based plasters: The influence of mineralogical and textural characteristics

L. Randazzo, G. Montana, A. Hein, A. Castiglia, G. Rodonò, D.I. Donato

Applied Clay Science· Volume 132-133
Publisher page

Abstract

Abstract Three pre-mixed clay based plasters successfully employed in green building practices in several European countries (Spain, France, Germany, and United Kingdom), mainly used for interior wall coating and finishing, were tested in this paper. Their compositional and textural characteristics as well as plastic behaviour were investigated through a multi-analytical approach in a previous paper. A natural earth (Terra Rossa red soil sampled in north-western Sicily), theoretically appropriate for the production of earthen plaster, was also subjected to the same analytical routine and compared with the three commercially available products. Humidity control capacity by the determination of the equilibrium moisture content, sound absorption coefficient and thermal conductivity of these ‘green’ building materials were tested according to the Italian and European regulations. The achieved results allowed the individuation of the compositional and textural features that primarily influence the performances of the studied clay based plasters. The obtained data are expected to be also useful in the selection of suitable raw materials and directing the local manufacture of innovative products.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hygrothermal properties of building materials · Building materials and conservation · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Effects of iron and aluminium oxides on the colloidal and surface properties of kaolin10.1346/CCMN.1995.0430403 ↗
2. Mineralogy and geochemistry of Terra Rossa, western Sicily: insights into heavy metal fractionation and mobility10.1016/S0048-9697(96)05336-3 ↗
3. Sound insulation of fibre reinforced mud brick walls10.1016/j.conbuildmat.2008.05.008 ↗
4. Impacts of a clay plaster on indoor air quality assessed using chemical and sensory measurements10.1016/j.buildenv.2012.06.004 ↗
5. Porosity determination with helium pycnometry as a method to characterize waterlogged woods and the efficacy of the conservation treatments10.1111/j.1475-4754.2011.00657.x ↗
6. Performance of ready-mixed clay plasters produced with different clay/sand ratios10.1016/j.clay.2015.08.005 ↗
7. Thermal conductivity of archaeological ceramics: the effect of inclusions, porosity and firing temperature10.1016/j.tca.2008.09.012 ↗
8. Heat transfer properties of pyrotechnical ceramics used in ancient metallurgy10.1016/j.tca.2013.09.024 ↗
9. Houben · 1994
10. ISO Standard 354 · 2003 · 28
11. Environmental impacts of natural and conventional building materials: a case study on earth plasters10.1016/j.jclepro.2014.05.073 ↗
12. Hematite identification in pseudoparticles of Moroccan rubified soils10.1180/claymin.1993.028.2.05 ↗
13. Minke · 2000
14. Minke · 2012
15. Geomaterials in green building practices: comparative characterization of commercially available clay-based plasters10.1007/s12665-013-2499-4 ↗
16. Calibration of pore volume in adsorption experiments and theoretical models10.1021/la970266s ↗
17. Norton · 1997
18. Eco-efficient construction and building materials research under the EU Framework Programme Horizon 202010.1016/j.conbuildmat.2013.10.058 ↗
19. Earth construction: lessons from the past for future eco-efficient construction10.1016/j.conbuildmat.2011.10.054 ↗
20. Clay Materials Used in Construction
21. Recommendations for the characterization of porous solids (technical report)10.1351/pac199466081739 ↗
22. Scorer · 1964
23. Molecular simulation of adsorption: Gibbs dividing surface and comparison with experiment10.1002/aic.690470521 ↗
24. Optimum design of the constant-volume gas pycnometer for determining the volume of solid particles10.1088/0957-0233/15/3/007 ↗
25. UK Building Regulations · 2015 · 82
26. UNI 11085:2003. Beni culturali - Materiali lapidei naturali ed artificiali - Determinazione del contenuto d'acqua: Metodo ponderale.
27. UNI 11086:2003. Beni culturali - materiali lapidei naturali ed artificiali - Determinazione del contenuto d'acqua di equilibrio.
28. UNI EN ISO 10534:2001, Acustica - Determinazione del coefficiente di assorbi- mento acustico e dell'impedenza acustica in tubi di impedenza - Parte 1: Metodo con le onde stazionarie; Parte 2: Metodo della funzione di trasferimento.
29. Influence de la température sur la détermination de la masse volumique de divers carbones par pycnométrie dans l'helium