Effects of talc on fire retarding, thermal degradation and water resistance of intumescent coating
Source abstract
Abstract
Abstract This study presents the influences of talc as an additive in intumescent coating formulations on the thermal insulation, degradation and water resistance. The fire test was performed according to ASTM-E119 standard to study the heat shielding properties of the coated substrates. The results showed that the 20% of the talc enhanced the heat shielding and recorded substrate temperature 75 °C after 100 min of fire test. The morphology of the char was analyzed by Scanning Electron Microscopy (SEM). X-ray fluorescence (XRF), X-ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FTIR) results showed the presence of P 2 O 5 , MgO, TiO 2 , and SiO 2 respectively. The functional groups analysis of char confirmed the presence of high temperature compounds and enhanced thermal performance of coatings. Thermogravimetric analysis (TGA) showed that addition of 20% talc increased residual mass of the char by 55.55%. The lap shear test result showed that the talc also improved the adhesion of the intumescent coating with steel substrate and the highest shear strength observed was 7 MPa for a formulation, F5 containing 20% talc. Water immersion test was performed according to ASTM D870-15 and the results showed the higher water-resistance was recorded for a formulation containing 10% talc in the control formulation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Flame retardant materials and properties · Polymer Nanocomposites and Properties · Fire dynamics and safety research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. To study the effect of aluminium trihydrate and fumed silica on intumescent fire retardant coating10.3923/jas.2012.2631.2635 ↗
2. Effect of fillers on the fire retardancy of intumescent polypropylene compounds10.1016/S0141-3910(03)00187-3 ↗
3. ASTM · 2016
4. ASTM-D3163-01 · 2014
5. ASTM-D870-15 · 2015
6. Mechanical, flow, and morphological properties of talc-and kaolin-filled polypropylene hybrid composites10.1002/app.25535 ↗
7. X-ray powder diffraction and IR study of calcium borophosphate CaBPO_5
8. New approach to the dynamic properties of an intumescent material10.1002/(SICI)1099-1018(199901/02)23:1<49::AID-FAM668>3.0.CO;2-D ↗
9. Sintering and properties of magnesium orthosilicate ceramic10.1016/j.ceramint.2015.07.157 ↗
10. Preparation and characterization of the intumescent fire retardant coating with a new flame retardant10.1016/j.apt.2008.07.002 ↗
11. Effects of adding organo-clays for acrylic-based intumescent coating on fire-retardancy of painted thin plywood10.1016/j.clay.2011.06.009 ↗
12. Influence of talc physical properties on the fire retarding behaviour of (ethylene–vinyl acetate copolymer/magnesium hydroxide/talc) composites10.1016/j.polymdegradstab.2004.12.010 ↗
13. A comparative study of the mechanism of action of ammonium polyphosphate and expandable graphite in polyurethane10.1016/S0141-3910(02)00069-1 ↗
14. Intumescent paints: fire protective coatings for metallic substrates10.1016/j.surfcoat.2003.10.075 ↗
15. Effects of inorganic fillers on the shear viscosity and fire retardant performance of waterborne intumescent coatings10.1016/j.porgcoat.2013.02.002 ↗
16. Chemical modification routes of synthetic talc: influence on its nucleating power and on its dispersion state10.1016/j.clay.2015.02.026 ↗
17. The settling of critical levels of soluble salts for painting10.1016/j.porgcoat.2006.11.003 ↗
18. Resistance to fire of curable silicone/expandable graphite based coating: effect of the catalyst10.1016/j.eurpolymj.2013.04.021 ↗
19. Gökçe · 2007
20. Study on preparation and fire-retardant mechanism analysis of intumescent flame-retardant coatings10.1016/j.surfcoat.2007.03.020 ↗
21. Inorganic hydroxides and hydroxycarbonates: their function and use as flame-retardant additives
22. Intumescent fire protective coating: toward a better understanding of their mechanism of action10.1016/j.tca.2006.07.008 ↗
23. Thermo-physical performance of organoclay coatings deposited on the surfaces of glass fibre-reinforced epoxy composites using an atmospheric pressure plasma or a resin binder10.1016/j.clay.2014.06.013 ↗
24. Properties of talc/wollastonite/polyamide 6 hybrid composites10.1002/pc.22993 ↗
25. TG-MS and TG-FTIR applied for an unambiguous thermal analysis of intumescent coatings10.1023/A:1022272707412 ↗
26. Clay–chitosan nanobrick walls: completely renewable gas barrier and flame-retardant nanocoatings10.1021/am2017915 ↗
27. Correlation between water diffusion and adhesion loss: study of an epoxy primer on steel10.1016/j.porgcoat.2009.08.001 ↗
28. Fire retardant polymers mechanisms of action in flame retardant reinforced nylon 610.1016/S0141-3910(96)00063-8 ↗
29. Thermodynamic analysis of nucleation of anatase and rutile from TiO2 melt10.1016/S0022-0248(02)01438-0 ↗
30. Effects of titanium dioxide on the flammability and char formation of water-based coatings containing intumescent flame retardants10.1016/j.porgcoat.2014.08.003 ↗
31. Effect of inorganic fillers on thermal performance and char morphology of intumescent fire retardant coating10.3923/ajsr.2013.263.271 ↗
32. Talc as raw material for cementitious products formulation10.1016/j.jascer.2014.05.007 ↗
33. Determining the TiO2-photocatalytic aryl-ring-opening mechanism in aqueous solution using oxygen-18 labeled O2 and H2O10.1021/ja5031936 ↗
34. Effect of cenospheres on the char formation and fire protective performance of water-based intumescent coatings on structural steel10.1016/j.porgcoat.2015.11.016 ↗
35. Purkiss · 2013
36. Simões · 2015 · 773
37. Enhancing the char resistant of expandable graphite based intumescent fire retardant coatings by using multi-wall carbon nano tubes for structural steel10.4028/www.scientific.net/SSP.185.90 ↗
38. Effects of zirconium silicate reinforcement on expandable graphite based intumescent fire retardant coating10.1016/j.polymdegradstab.2014.02.016 ↗
39. Effect of boric acid and melamine on the intumescent fire-retardant coating composition for the fire protection of structural steel substrates10.1002/app.38318 ↗
40. Ullah, S., Bustam, M.A., Nadeem, M., Naz, M.Y., Tan, W.L., Shariff, A.M., 2014b. Synthesis and Thermal Degradation Studies of Melamine Formaldehyde Resins. Sci. World J. 2014a, 940502, 6.
41. Synergistic effects of kaolin clay on intumescent fire retardant coating composition for fire protection of structural steel substrate10.1016/j.polymdegradstab.2014.08.017 ↗
42. Synthesis and characterization of melamine formaldehyde resins for decorative paper applications10.1002/jccs.201400226 ↗
43. Effects of ammonium polyphosphate and boric acid on the thermal degradation of an intumescent fire retardant coating10.1016/j.porgcoat.2017.04.017 ↗
44. The role of multi-wall carbon nanotubes in char strength of epoxy based intumescent fire retardant coating10.1016/j.jaap.2017.02.011 ↗
45. Influences of binder on fire protection and anticorrosion properties of intumescent fire resistive coating for steel structure10.1016/j.surfcoat.2009.10.040 ↗
46. Influences of glass flakes on fire protection and water resistance of waterborne intumescent fire resistive coating for steel structure10.1016/j.porgcoat.2010.10.007 ↗
47. Fire-resistant effect of nanoclay on intumescent nanocomposite coatings10.1002/app.25096 ↗
48. Influence of expandable graphite on fire resistance and water resistance of flame-retardant coatings10.1016/j.corsci.2006.10.024 ↗
49. Fire-protective and flame-retardant coatings-a state-of-the-art review10.1177/0734904110395469 ↗
50. The thermal characteristics of different intumescent coatings10.1002/(SICI)1099-1018(199901/02)23:1<33::AID-FAM667>3.0.CO;2-Z ↗
51. Siloxane-modified epoxy resin–clay nanocomposite coatings with advanced anticorrosive properties prepared by a solution dispersion approach10.1016/j.surfcoat.2004.11.008 ↗
52. Effect of nano-Al2O3 on adhesion strength of epoxy adhesive and steel10.1016/j.ijadhadh.2007.03.005 ↗
53. Experimental study of initial strengths and hygrothermal degradation of adhesive joints between thin aluminum and steel substrates10.1016/j.ijadhadh.2013.01.001 ↗
54. Effect of nano-modified adhesive on interface adhesion properties of steel component reinforced with carbon fibre reinforced polymer10.1179/1432891715Z.0000000002009 ↗