Preparation and characterization of an organo-palygorskite-Fe3O4 nanomaterial for removal of anionic dyes from wastewater
Source abstract
Abstract
Abstract The organophilization of clays to increase interfacial interactions is a typical practice when the objective is its encapsulation with a polymer. This work intend to synthesize and characterize an organo-palygorskite-Fe3O4, to change the hydrophilicity of the material and investigate its efficiency in the removal of two anionic dyes from aqueous solution with the aim to use this material to treat wastewater contaminated with dyes. The organophilization of modified palygorskite–Fe3O4 was done with a cationic surfactant (cetyl trimethylammonium bromide, CTAB) and the material obtained was characterized by XRF, SEM, XRD, FTIR, Nano Zetasizer, density, BET surface area, TGA/DTA and contact angle measurements. XRF and FTIR confirmed the presence of carbon in the modified palygorskite–Fe3O4 nanoparticles while XRD showed new crystalline phases from CTAB. Furthermore, a positive zeta potential value appeared and an inversion in the nanoparticles' hydrophobicity happened due to the increase of organic carbon content in the organo-palygorskite-Fe3O4. The adsorbed anionic dye on organo-palygorskite-Fe3O4 may be completely recovered by the action of a magnet, showing an excellent adsorptive property and economical alternative adsorbents to treat dye wastewater. The negative values calculated for the free energies of adsorption indicate that the adsorption of methyl orange and indigo carmine on the active sites of organo-palygorskite-Fe3O4 surface was spontaneous and that the indigo carmine had the best interaction with the magnetic organo clay.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Clay minerals and soil interactions · Iron oxide chemistry and applications · Adsorption and biosorption for pollutant removal
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. FTIR and zeta potential measurements of sepiolite treated with some organosilanes10.1016/j.micromeso.2005.05.016 ↗
2. Removal of acid dyes from aqueous media by adsorption onto amino-functionalized nanoporous silica SBA-310.1016/j.dyepig.2011.10.016 ↗
3. Interaction between cetyltrimethylammonium bromide and beta-cyclodextrin: surface tension and interfacial dilational viscoelasticity studies10.1007/s00396-008-1918-7 ↗
4. Influence of morphology and surface charge on the suitability of palygorskite as drilling fluid10.1016/j.clay.2008.04.008 ↗
5. Adsorption of an anionic dye from aqueous medium by organoclays: equilibrium modeling, kinetic and thermodynamic exploration10.1039/c2ra20347b ↗
6. Compositional, thermal and magnetic analysis of bamboo fibers covered with magnetite nanoparticles by in-situ co-precipitation
7. Adsorption study for removal of Congo red anionic dye using organo-attapulgite10.1007/s10450-009-9155-z ↗
8. Isotherm, thermodynamic, kinetics and adsorption mechanism studies of methyl orange by surfactant modified silkworm exuviae
9. Mechanical and thermal properties of attapulgite clay reinforced polymethylmethacrylate nanocomposites10.1002/pat.1691 ↗
10. Study on a novel polyampholyte nanocomposite superabsorbent hydrogels: synthesis, characterization and investigation of removal of indigo carmine from aqueous solution10.1016/j.desal.2011.06.004 ↗
11. Adsorption of methyl orange on mesoporous γ-Fe2O3/SiO2 nanocomposites10.1016/j.apsusc.2010.11.067 ↗
12. Modeling the adsorption of textile dye on organoclay using an artificial neural network10.1016/j.dyepig.2012.03.001 ↗
13. Cetyltrimethylammonium bromide-coated magnetite nanoparticles as highly efficient adsorbent for rapid removal of reactive dyes from the textile companies wastewaters10.1007/BF03246192 ↗
14. Formation of nanocrystalline magnetite by thermal decomposition of iron choline citrate10.1016/S0925-8388(01)01792-3 ↗
15. Preparation of PEO/clay nanocomposites using organoclay produced via micellar adsorption of CTAB10.1100/2012/270452 ↗
16. Magnetic nanoparticle detection using nano-SQUID sensors10.1088/0022-3727/43/47/474004 ↗
17. Synthesize and characterization of sawdust/MnFe2O4 nano composite for removal of indigo carmine from aqueous solutions10.13005/ojc/300434 ↗
18. Surfactant assisted hydrothermal synthesis of dentritic magnetite microcrystals10.1021/cg8003933 ↗
19. Nano magnetite particles prepared under the combined addition of urea and ammonia10.4028/www.scientific.net/KEM.317-318.203 ↗
20. Removal of methyl orange from aqueous solutions by magnetic maghemite/chitosan nanocomposite films: adsorption kinetics and equilibrium10.1002/app.37003 ↗
21. Removal of arsenate by cetyltrimethylammonium bromide modified magnetic nanoparticles10.1016/j.jhazmat.2012.05.004 ↗
22. Investigation of the orientation of CTA+ ions in the interlayer of CTAB pillared montmorillonite10.1155/2013/274838 ↗
23. Preparation of cetyltrimethylammonium bromide modified montmorillonite nanomaterial for adsorption of a textile dye10.1016/j.jtice.2014.06.007 ↗
24. An investigation of friction and wear behavior of polyimide/attapulgite hybrid materials10.1002/mame.200400336 ↗
25. Characterization of organobentonite used for polymer nanocomposites10.1016/j.matchemphys.2004.01.032 ↗
26. Organo and inorgano-organo-modified clays in the remediation of aqueous solutions: an overview10.1016/j.clay.2012.02.006 ↗
27. The effect of surfactants on the distribution of organic compounds in the soil solid/water system10.1016/j.jhazmat.2004.07.016 ↗
28. Synthesis and characterization of organo-attapulgite/polyaniline-dodecylbenzenesulfonic acid based on emulsion polymerization method10.1002/pc.20349 ↗
29. Reinforcement of polyurethane/epoxy interpenetrating network nanocomposites with an organically modified palygorskite10.1002/app.29360 ↗
30. An NMR investigation on the phase structure and molecular mobility of the novel exfoliated polyethylene/palygorskite nanocomposites10.1002/polb.22036 ↗
31. Facile synthesis of silver nanoparticles with high concentration via a CTAB-induced silver mirror reaction10.1016/j.colsurfa.2012.03.002 ↗
32. Core-shell attapulgite@polyaniline composite particles via in situ oxidative polymerization10.1016/j.synthmet.2007.06.009 ↗
33. Attapulgite-Fe3O4 magnetic nanoparticles via co-precipitation technique10.1016/j.apsusc.2008.06.193 ↗
34. Silica nanoparticles separation from water: aggregation by cetytrimethylammonium bromide (CTAB)10.1016/j.chemosphere.2013.03.048 ↗
35. Rod-like silicate-epoxy nanocomposites10.1002/marc.200500360 ↗
36. A novel approach to high performance elastomer by using clay10.1002/marc.200400286 ↗
37. FTIR techniques in clay mineral studies10.1016/S0924-2031(02)00065-6 ↗
38. Evolution of ZnS nanoparticles via facile CTAB aqueous micellar solution route: a study on controlling parameters10.1007/s11671-008-9196-3 ↗
39. Evaluation of Fe (III) adsorption onto palygorskite surfaces10.1016/j.apsusc.2013.05.113 ↗
40. Synthesis and characterization of magnetic palygorskite nanoparticles and their use on removal of methylene blue from water10.1016/j.apsusc.2015.03.080 ↗
41. Chitosan/maghemite composite: a magsorbent for the adsorption of methyl orange10.1016/j.jcis.2013.07.057 ↗
42. Interfacial interactions and performance of polyamide 6/modified attapulgite clay nanocomposites10.1002/pc.20541 ↗
43. A review on experimental studies of surfactant adsorption at the hydrophilic solid-water interface10.1016/j.cis.2004.03.001 ↗
44. Synthesis and characterization of magnetite nanoparticles via the chemical co-precipitation method10.1016/j.mseb.2012.01.003 ↗
45. Surface charge characteristics of organo-palygorskites and adsorption of p-nitrophenol in flow-through reactor system10.1016/j.cej.2011.05.062 ↗
46. Comparison of different methods to measure contact angles of soil colloids10.1016/j.jcis.2008.09.039 ↗
47. Preparation and rheology of polyamide-6/attapulgite nanocomposites and studies on their percolated structure10.1016/j.polymer.2005.05.040 ↗
48. Adsorption kinetics and isotherm of anionic dyes onto organo-bentonite from single and multisolute systems10.1016/j.jhazmat.2009.06.139 ↗
49. Contact angles of quartz by capillary penetration of liquids and captive bubble techniques10.1016/S0892-6875(99)00122-3 ↗
50. Structural and mechanical properties of polymer nanocomposites10.1016/j.mser.2006.06.001 ↗
51. Infrared spectroscopy of anionic, cationic, and zwitterionic surfactants10.1155/2012/903272 ↗
52. Effects of organophilic-modified attapulgite nanorods on thermal and mechanical behavior of segmented polyurethane elastomers10.1002/pc.20985 ↗
53. The impact of esterification on the properties of starch/natural rubber composite10.1016/j.compscitech.2009.04.018 ↗
54. Effects of modified attapulgite on the properties of attapulgite/epoxy nanocomposites10.1002/pc.22373 ↗
55. Organo-bentonite-Fe3O4 poly(sodium acrylate) magnetic superabsorbent nanocomposite: synthesis, characterization, and thorium (IV) adsorption10.1016/j.clay.2013.07.012 ↗
56. Palygorskite as an epoxy polymer reinforcement agent10.1016/j.polymer.2006.03.036 ↗
57. Effect of silica on the structure of cetyltrimethylammonium bromide
58. Palygorskite-cerium oxide filled rubber nanocomposites10.1016/j.clay.2012.07.002 ↗