Synergistic effects in epoxy functionalized graphene and modified organo-montmorillonite PLA/PBAT blends
Source abstract
Abstract
Abstract In this work, the organo-montmorillonites (OMt): non polar Cloisite15A and polar Cloiste30B, epoxy functionalized graphene (EFG) and OMt/EFG mixture were adopted as property enhancers for a blend based on poly(lactic acid) (PLA) and poly(butylenes adipate-co-terephthalate) (PBAT). Blends of PLA/PBAT, OMt-PLA/PBAT, EFG-PLA/PBAT and OMt/EFG-PLA/PBAT were prepared, through the melt-blending technique. The morphological, interfacial, rheological and mechanical properties of the different systems were studied. A synergistic reinforcement was achieved by the combined incorporation of OMt with EFG in the PLA/PBAT blend, leading to improve rheological and mechanical properties. The storage modulus (G′) increased because of formation stronger percolated networks by the dispersed nanofillers at low frequencies. Concerning tensile tests, an increase in elastic modulus and elongation at the break were observed. This synergistic reinforcement resulted from co-dispersion and interfacial interactions as shown by X-ray diffraction, TEM analysis and interfacial properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: biodegradable polymer synthesis and properties · Polymer Nanocomposites and Properties · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Effect of dispersion and selective localization of carbon nanotubes on rheology and electrical conductivity of polyamide 6 (PA6), polypropylene (PP), and PA6/PP nanocomposites10.1002/polb.23638 ↗
2. Rheological properties of poly (lactic acid) based nanocomposites: effects of different organoclay modifiers and compatibilizers10.1002/app.42915 ↗
3. Combined effect of epoxy functionalized graphene and organomontmorillonites on the morphology, rheological and thermal properties of poly (butylenes adipate-co-terephtalate) with or without a compatibilizer10.1016/j.clay.2017.06.009 ↗
4. Influence of boehmite nanoparticle loading on the mechanical, thermal, and rheological properties of biodegradable Polylactide/poly (ϵ-caprolactone) blends10.1002/mame.201400212 ↗
5. Improvement of thermal stability, rheological and mechanical properties of PLA, PBAT and their blends by reactive extrusion with functionalized epoxy10.1016/j.polymdegradstab.2012.06.028 ↗
6. Rheological, morphological, and interfacial properties of compatibilized PLA/PBAT blends10.1007/s00397-014-0774-2 ↗
7. Influence of chain extender on mechanical, thermal and morphological properties of blown films of PLA/PBAT blends10.1016/j.polymertesting.2015.02.005 ↗
8. Effect of clay type and polymer matrix on microstructure and tensile properties of PLA/LLDPE/clay nanocomposites10.1002/app.39209 ↗
9. Thermal and dynamic mechanical characterization of thermoplastic polyurethane/organoclay nanocomposites prepared by melt compounding10.1016/j.msea.2009.10.063 ↗
10. Effect of organo-montmorillonite addition on the dynamic and capillary rheology of LLDPE/EMA blends10.1016/j.clay.2012.02.007 ↗
11. Synergy between fillers in organomontmorillonite/graphene–PLA nanocomposites10.1016/j.clay.2015.08.017 ↗
12. Organomontmorillonite/graphene-PLA/PCL nanofilled blends: new strategy to enhance the functional properties of PLA/PCL blend10.1016/j.clay.2017.01.014 ↗
13. Biobased ternary blends of lignin, poly (lactic acid), and poly (butylene adipate-co-terephthalate): the effect of lignin heterogeneity on blend morphology and compatibility10.1007/s10924-014-0704-5 ↗
14. Morphology, miscibility and continuity development in poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends10.1016/j.polymer.2015.05.012 ↗
15. Localization of micro-and nano-silica particles in heterophase poly (lactic acid)/poly (butylene adipate-co-terephthalate) blends10.1016/j.polymer.2015.08.046 ↗
16. Localization of micro and nano-silica particles in a high interfacial tension poly (lactic acid)/low density polyethylene system10.1016/j.polymer.2015.08.063 ↗
17. Experimental and theoretical analyses of mechanical properties of PP/PLA/clay nanocomposites10.1016/j.compositesb.2014.09.006 ↗
18. Migration of nanosilica particles in polymer blends10.1002/polb.21534 ↗
19. MFC-structured biodegradable poly (l-lactide)/poly (butylene adipate-co-terephatalate) blends with improved mechanical and barrier properties10.1007/s10853-013-7431-5 ↗
20. Effect of expanded graphite/layered-silicate clay on thermal, mechanical and fire retardant properties of poly (lactic acid)10.1016/j.polymdegradstab.2010.02.029 ↗
21. PBAT based nanocomposites for medical and industrial applications10.1016/j.msec.2012.04.005 ↗
22. Rheological behaviour of polypropylene/kenaf fibre/wood flour hybrid composite
23. Effect of plate-like particles on properties of poly (lactic acid)/poly (butylene adipate-co-terephthalate) blend: a comparative study between modified montmorillonite and graphene nanoplatelets10.1016/j.compscitech.2015.10.005 ↗
24. A theory for the estimation of surface and interfacial energies. I. Derivation and application to interfacial tension10.1021/j150553a013 ↗
25. Organoclay localization in polyamide 6/ethylene-butene copolymer grafted maleic anhydride blends: the effect of different types of organoclay10.1007/s10965-011-9769-1 ↗
26. Effect of cloisite 30B on the thermal and tensile behavior of poly (butylene adipate-co-terephthalate)/poly (vinyl chloride) nanoblends10.1007/s00289-014-1137-y ↗
27. Combination of graphene and montmorillonite reduces the flammability of poly (vinyl alcohol) nanocomposites10.1016/j.clay.2013.01.005 ↗
28. Effect of the montmorillonite intercalant and anhydride maleic grafting on polylactic acid structure and properties10.1016/j.clay.2015.01.004 ↗
29. Synergetic association of grafted PLA and functionalized graphene on the properties of the designed nanocomposites10.1007/s00289-016-1759-3 ↗
30. Study of biodegradable polylactide/poly (butylene adipate-co-terephthalate) blends10.1021/bm050581q ↗
31. Morphology, interfacial and mechanical properties of polylactide/poly (ethylene terephthalate glycol) blends compatibilized by polylactide-g-maleic anhydride10.1016/j.matdes.2014.03.016 ↗
32. Rheology and physical characteristics of synthetic biodegradable aliphatic polymer blends dispersed with MWNTs10.1002/mame.200900390 ↗
33. Effect of glycidyl methacrylate (GMA) on the thermal, mechanical and morphological property of biodegradable PLA/PBAT blend and its nanocomposites10.1016/j.biortech.2010.05.075 ↗
34. Structural and rheological properties of different polyamide/polyethylene blends filled with clay nanoparticles: a comparative study10.1016/j.polymer.2013.05.020 ↗
35. Thermal and biodegradable properties of poly (l-lactide)/poly (ε-caprolactone) compounded with functionalized organoclay10.1007/s10924-010-0256-2 ↗
36. Reinforcement and deformation behaviors of polyvinyl alcohol/graphene/montmorillonite clay composites10.1016/j.compscitech.2015.08.008 ↗
37. Morphology and rheological properties of silica-filled poly (carbonate)/poly (methyl methacrylate) blends10.1002/pen.24036 ↗
38. Mechanical properties and morphology of biodegradable poly (lactic acid)/poly (butylene adipate-co-terephthalate) blends compatibilized by transesterification10.1016/j.matdes.2011.11.036 ↗
39. Relationship between morphology and rheology of PA/PE/clay blend nanocomposites. I. PA matrix10.1002/app.36439 ↗
40. Biopolymer–thermally reduced graphene nanocomposites: structural characterization and properties10.1016/j.matchemphys.2014.05.007 ↗
41. Study of thermo-mechanical and morphological behaviour of biodegradable PLA/PBAT/layered silicate blend nanocomposites10.1007/s10924-014-0639-x ↗
42. Silsesquioxanes: novel compatibilizing agents for tuning the microstructure and properties of PLA/PCL immiscible blends10.1016/j.eurpolymj.2014.06.021 ↗
43. Prediction of tensile modulus of nanocomposites based on polymeric blends10.1007/s13726-013-0143-5 ↗
44. Dispersion study of nanofibrillated cellulose based poly (butylene adipate-co-terephthalate) composites10.1016/j.carbpol.2013.11.047 ↗
45. Poly (trimethylene) terephthalate/m-LLDPE blend nanocomposites: evaluation of mechanical, thermal and morphological behavior10.1016/j.msea.2009.08.026 ↗
46. Improvement of dynamic tensile properties of poly (lactic acid)/poly (butylene adipate-co-terephthalate) polymer alloys using a crosslinking agent and observation of fracture surfaces10.1016/j.ijimpeng.2014.11.010 ↗
47. Role of organically modified layered silicate as an active interfacial modifier in immiscible polystyrene/polypropylene blends10.1016/j.polymer.2004.10.009 ↗
48. Preparation, characterization and properties of binary and ternary blends with thermoplastic starch, poly (lactic acid) and poly (butylene adipate-co-terephthalate)10.1016/j.carbpol.2009.01.024 ↗
49. Binary and ternary blends of polylactide, polycaprolactone and thermoplastic starch10.1016/j.polymer.2007.11.029 ↗
50. Mechanical and morphological properties of poly (butylene adipate-co-terephthalate) and poly (lactic acid) blended with organically modified silicate layers10.1002/pen.23082 ↗
51. Thermal degradation of poly (lactic acid)(PLA) and poly (butylene adipate-co-terephthalate)(PBAT) and their blends upon melt processing10.1016/j.polymdegradstab.2008.10.004 ↗
52. Influence of intercalation methods in properties of clay and carbon nanotube and high density polyethylene nanocomposites10.1590/1516-1439.303714 ↗
53. Utracki · 2002
54. Preparation of poly (lactide)/poly (butylene adipate-co-terephthalate) blend films using a solvent casting method and their food packaging application10.1016/j.lwt.2015.12.062 ↗
55. Wu · 1971 · 19
56. Phase behavior and its viscoelastic response of polylactide/poly (ε-caprolactone) blend10.1016/j.eurpolymj.2008.04.023 ↗
57. Interfacial properties, viscoelasticity, and thermal behaviors of poly (butylene succinate)/polylactide blend10.1021/ie2022288 ↗
58. Rheological behaviors of randomly crosslinked low density polyethylene and its gel network10.1016/j.polymer.2012.05.004 ↗
59. Strong and ductile poly (lactic acid) nanocomposite films reinforced with alkylated graphene nanosheets10.1016/j.cej.2014.11.066 ↗
60. Interfacial localization of multiwalled carbon nanotubes in immiscible blend of poly (ethylene terephthalate)/polyamide 610.1007/s12221-013-0518-4 ↗
61. Characterization of PP/EPDM/HDPE ternary blends: the role of two EPDM with different viscosity and processing method10.1080/03602559.2012.679379 ↗
62. Effect of fumed silica nanoparticles on the morphology and rheology of immiscible polymer blends10.1007/s00397-013-0740-4 ↗