journal article·2005-01

Neapolitan Yellow Tuff as raw material for lightweight aggregates in lightweight structural concrete production

R. de Gennaro, P. Cappelletti, G. Cerri, M. de'Gennaro, M. Dondi, A. Langella

Applied Clay Science· Volume 28· Issue 1-4
Publisher page

Abstract

The possibility of using italian zeolitized volcanoclastites for the production of lightweight aggregates in the building industry has been tested. The paper definitely demonstrates the good attitude of the Neapolitan Yello Tuff (NYT) for the production of lightweight expanded aggregates (LEA) with bulk densities ranging between 0.9 and 1.1 g/cm3. LEA showing these features, usually manufactured with clays, are mainly used in the production of lightweight structural concrete (LSC). The physical characterization of LEAs was carried out by means of: grain size analysis, loose weight, mean density of the single grain, water absorption after 30 minutes and 24 h, and strengh of particles (UNI-7549). Afterwards, LEAs were mixed with sand, cement and water to prepare cubic concrete blocks following the UNI specifications (UNI 7549-12). On these specimens, the unit weight and uniaxial compressive strength after 28 days were determined. The investigated parameters measured both on LEAs and concretes, are comparable with those measured on materials commonly traded in Italy. The results foresee interesting potential applications for raw materials characterized by a low exploitation cost and a widespread availability on the Italian territory.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. An introduction to lightweight aggregates
2. Mineral in fire protection construction support market
3. National self-sufficiency in lightweight aggregate resources
4. Multireflection RIR and intensity normalizations for quantitative analyses: applications to feldspar and zeolites10.1017/S0885715600014305 ↗
5. Cadmium removal from wastewater using natural zeolites
6. Italian zeolited rocks of technological interest10.1007/BF00196127 ↗
7. Le phillipsiti dei tufi gialli del napoletano
8. Hypotheses on the genesis of zeolites in some European volcaniclastic deposits
9. Genesis of zeolites in the Neapolitan yellow tuff: geological, volcanological and mineralogical evidences10.1007/s004100050571 ↗
10. de Gennaro, R., Dondi, M., Cappelletti, P., Colella, A., Langella, A., 2001. Use of high-grade zeolite-bearing rocks as raw material for the preparation of lightweight aggregates. Proc. EUROMAT 2001 (CD Rom), AIM (Ass. Ital. Metallurgia), Milano 2001 (Abstract in “Conference Abstracts”, p. †354).
11. Zeolitic tuffs as raw materials for lightweight aggregates10.1016/j.clay.2003.08.005 ↗
12. Industrial minerals, lightweight or spherical or both
13. ISO 679, 1989. Methods of testing cements—determination of strength.
14. Lightweight aggregates
15. Minerals in lightweight insulation: filling the market
16. L'analisi chimica degli smalti e delle fritte ceramiche mediante Spettrofotometria di Emissione al Plasma (ICP-AES)
17. Natural zeolite: where have we been, where are we going?
18. The Neapolitan yellow tuff. A large volume multiphase eruption from Campi Flegrei, Southern Italy10.1007/BF00301145 ↗
19. Suppl. Ord. G.U.R.I. no. 29, 1996a. Decreto Ministeriale 9 gennaio 1996 Norme tecniche per il calcolo, l'esecuzione ed il collaudo delle strutture in cemento armato, normale e precompresso e per tutte le strutture metalliche.
20. Suppl. Ord. G.U.R.I. no. 277, 1996b. Circolare 15 ottobre 1996, no. 252 AA.GG./STC. Istruzioni per l'applicazione delle “Norme tecniche per il calcolo, l'esecuzione ed il collaudo delle strutture in cemento armato, normale e precompresso e per tutte le strutture metalliche” di cui al D.M. 9 gennaio 1996.
21. UNI-7549-3, 1976. Lightweight aggregates—sieve or screen analysis.
22. UNI-7549-4, 1976. Lightweight aggregates—determination of the bulk unit weight (loose weight).
23. UNI-7549-5, 1976. Lightweight aggregates—determination of the unit weight particle.
24. UNI-7549-6, 1976. Lightweight aggregates—determination of the water absorption coefficient.
25. UNI-7549-7, 1976. Lightweight aggregates—determination of strength particle.
26. UNI-7549-12, 1976. Lightweight aggregates—evaluation of the properties by standard lab concrete tests.