High performance illitic clay-based geopolymer: Influence of thermal/mechanical activation on strength development
Source abstract
Abstract
Expansive soils commonly encountered beneath foundations often lead to structural issues inducing expensive repairs. With the increase of the frequency of dry summers and irregular rainfall patterns, the clayey and marly soils become more and more sensitive to shrinking and swelling phenomena. So to find solutions and improve the knowledge on such phenomena especially in temperate countries where the saturation state is considered as the usual soil state, the impact of the soil density on shrinkage was studied by varying the compaction mode and introducing a swelling step before shrinkage. As expected, dynamically or statically compacted clayey or marly soils exhibited high shrinkage deformation when the soil had a low density. The swelling before shrinkage impacted the soil structure but ultimately had a low effect on shrinkage deformation. Swelling deformation was also influenced by density; the denser the soil, the more sensitive the compacted soil became to swelling. Furthermore, compaction modes induced differences in swelling or shrinkage amplitude that couldn’t be explained by microstructural observations. Finally, results demonstrated that intact soil behavior after shrinkage could be extrapolated from swelling–shrinkage tests conducted on remolded soil samples, thus decreasing the cost of field investigations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Clay minerals and soil interactions · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Correlation of strength to apparent porosity of geopolymers – understanding through variations of setting time10.1016/j.conbuildmat.2015.05.059 ↗
2. Mechanochemical and thermal activation of kaolin for manufacturing geopolymer mortars – Comparative study10.1016/j.ceramint.2016.06.182 ↗
3. Synthesis and characterisation of materials based on inorganic polymers of alumina and silica: sodium polysialate polymers10.1016/S1466-6049(00)00041-6 ↗
4. The suitability of thermally activated illite/smectite clay as raw material for geopolymer binders10.1016/j.clay.2009.08.026 ↗
5. Effect of Na2O content, SiO2/Na2O molar ratio, and curing conditions on the compressive strength of FA-based geopolymer10.1016/j.conbuildmat.2017.04.004 ↗
6. Chukanov · 2014
7. Carbonate and silicate phase reactions during ceramic firing10.1127/0935-1221/2001/0013-0621 ↗
8. Davidovits · 2015
9. Effects of processing on the mineralogy and solubility of carbonate-rich clays for alkaline activation purpose: mechanical, thermal activation in red/ox atmosphere and their combination10.1016/j.clay.2017.11.036 ↗
10. The importance of specific surface area in the geopolymerization of heated illitic clay10.1016/j.clay.2017.01.001 ↗
11. An improved model for structural transformations of heat-treated aluminous dioctahedral 2:1 layer silicates10.1346/CCMN.1995.0430608 ↗
12. Understanding the relationship between geopolymer composition, microstructure and mechanical properties10.1016/j.colsurfa.2005.06.060 ↗
13. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
14. Thermal analysis of selected illite and smectite clay minerals. Part I. Illite clay specimens
15. Thermally treated clay sediments as geopolymer source material10.1016/j.clay.2015.01.027 ↗
16. Mechanochemical Treatment of Kaolinite10.1006/jcis.2001.7591 ↗
17. Kinetics of illite dehydroxylation10.1007/s00269-006-0092-z ↗
18. Hamzaoui, R., Muslim, F., Guessasma, S., Bennabi, A., Guillin, J., 2015. Structural and thermal behavior of proclay kaolinite using high energy ball milling process. Powder Technol. 271, 228–237. doi:https://doi.org/10.1016/j.powtec.2014.11.018.10.1016/j.powtec.2014.11.018 ↗
19. The influence of alkali activator type, curing temperature and gibbsite on the geopolymerization of an interstratified illite-smectite rich clay from Friedland10.1016/j.clay.2016.10.021 ↗
20. Structure and chemical characteristics of modified clays
21. A critical review of geopolymer properties for structural fire-resistance applications10.1016/j.conbuildmat.2019.06.076 ↗
22. A review: the comparison between alkali-activated slag (Si+ca) and metakaolin (Si+Al) cements10.1016/j.cemconres.2010.03.020 ↗
23. Stabilization/solidification of a municipal solid waste incineration residue using fly ash-based geopolymers10.1016/j.jhazmat.2010.08.127 ↗
24. Formation of aluminosilicate geopolymers from 1:1 layer-lattice minerals pre-treated by various methods: a comparative study10.1007/s10853-006-0173-x ↗
25. Formation of inorganic polymers (geopolymers) from 2:1 layer lattice aluminosilicates10.1016/j.jeurceramsoc.2007.06.004 ↗
26. FTIR techniques in clay mineral studies10.1016/S0924-2031(02)00065-6 ↗
27. IR spectra of clay minerals10.1016/B978-0-08-100355-8.00005-9 ↗
28. The effect of Quartz Content on the Mechanochemical Activation of Kaolinite10.1006/jcis.2001.7953 ↗
29. Enhancing reactivity in muscovitic clays : mechanical activation as a sustainable alternative to thermal activation for cement production10.1016/j.clay.2024.107266 ↗
30. Structural transformation of 2:1 dioctahedral layer silicates during dehydroxylation-rehydroxylation reactions10.1346/CCMN.2000.0480510 ↗
31. A review on microstructural study and compressive strength of geopolymer mortar, paste and concrete10.1016/j.conbuildmat.2018.07.075 ↗
32. Mitigation of efflorescence, drying shrinkage and water demand of calcined clay-based geopolymers with biological waste ashes as activator and hardener10.1016/j.clay.2023.107050 ↗
33. Modified mineral phases during clay ceramic firing10.1346/CCMN.2015.0630506 ↗
34. What is the role of water in the geopolymerization of metakaolin?10.1016/j.conbuildmat.2018.06.073 ↗
35. Geopolymerisation kinetics. 1. In situ energy-dispersive X-ray diffractometry10.1016/j.ces.2007.01.027 ↗
36. Geopolymerisation kinetics. 2 Reaction kinetic modelling10.1016/j.ces.2007.01.028 ↗
37. Reaction mechanism, kinetics and high temperature transformations of geopolymers10.1007/s10853-006-0568-8 ↗
38. Russell · 1994
39. Sanchez-Soto · 1997
40. Effect of thermal pre-treatment conditions of common clays on the performance of clay-based geopolymeric binders10.1016/j.clay.2012.09.010 ↗
41. Minerals from Macedonia. Part XIX. Vibrational spectroscopy as identificational tool for some sheet silicate minerals10.1016/j.molstruc.2006.10.026 ↗
42. Mechanical and microstructural properties of metakaolin-based geopolymer cements from sodium waterglass and phosphoric acid solution as hardeners: a comparative study10.1016/j.clay.2017.02.002 ↗
43. Determination of structural modification in acid activated montmorillonite clay by FT-IR spectroscopy10.1016/j.saa.2005.07.018 ↗
44. Alkali-activated geopolymerization of a low illitic raw clay and waste brick mixture. An alternative to traditional ceramics10.1016/j.clay.2022.106410 ↗
45. The surface properties of clay minerals modified by intensive dry milling — revisited10.1016/j.clay.2010.03.006 ↗
46. Pozzolan obtained by mechanochemical and thermal treatments of kaolin10.1016/j.clay.2009.09.008 ↗
47. Comparison of long term performance between alkali activated slag and fly ash geopolymer concretes10.1016/j.conbuildmat.2017.03.153 ↗
48. Micromechanical properties of geopolymers with different calcined clay precursors10.1016/j.clay.2024.107259 ↗
49. Interfacial characteristics and mechanical behavior of geopolymer stabilizers with clay mineral: a molecular dynamics study10.1016/j.clay.2024.107286 ↗
50. The effect of alkali metals on the formation of geopolymeric gels from alkali-feldspars10.1016/S0927-7757(02)00499-5 ↗
51. Fly ash-based geopolymers: the relationship between composition, pore structure and efflorescence10.1016/j.cemconres.2014.06.004 ↗
52. A multiscale investigation of reaction kinetics, phase formation, and mechanical properties of metakaolin geopolymers10.1016/j.cemconcomp.2016.12.010 ↗