Adsorption toward Pb(II) occurring on three-dimensional reticular-structured montmorillonite hydrogel surface
Source abstract
Abstract
Abstract Two-dimensional montmorillonite nanosheets (2DMMT), acrylic acid and acrylamide were used as raw materials to synthesize the three-dimensional reticular-structured hydrogel via hydrogen-bond, polymerization, amidation and electrostatic interactions. Morphology characteristics shown the porous structure of montmorillonite hydrogel, offering an open-access for Pb(II) to react with internal adsorption sites. Adsorption tests indicated that 2DMMT hydrogel could achieve the effective removal (99%) for high concentrated Pb(II) solution (125 mg/L) via small hydrogel dosage (1 g/L) within short contact time (60 min). High removal of Pb(II) (70%, adsorption capacity: 90 mg/g) could be still achieved even after five adsorption-regeneration cycles, achieving the long-term servicing for wastewater treatment with cost-optimal operation. Adsorption kinetics and isotherm tests indicating the homogeneous monolayer physical and chemical adsorption between Pb(II) and hydrogel, and the adsorption capacity of Pb(II) was controlled by the amount of adsorption sites on hydrogel. Characteristics of XPS and EDS revealed the adsorption mechanism of ion exchange, chelation reaction and chemical precipitation. Capsule Two-dimension montmorillonite with high surface area and fully-exposed active sites formed the reticular-structured hydrogel, showing high removal ability for Pb(II).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Adsorption and biosorption for pollutant removal · Hydrogels: synthesis, properties, applications · Graphene and Nanomaterials Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Pyramidalization/twisting of the amide functional group via remote steric congestion triggered by metal coordination10.1039/C6SC03669D ↗
2. Adsorption of Pb(II) on Mentha piperita carbon (MTC) in single and quaternary systems10.1016/j.arabjc.2012.09.013 ↗
3. Correlation of exfoliation performance with interlayer cations of montmorillonite in the preparation of two-dimensional nanosheets10.1111/jace.16285 ↗
4. Structures and mineralogy of clay minerals
5. Enhanced adsorption of U(VI) and 241Am(III) from wastewater using Ca/Al layered double hydroxide@carbon nanotube composites10.1016/j.jhazmat.2017.12.062 ↗
6. Potential mechanisms of cadmium removal from aqueous solution by Canna indica derived biochar10.1016/j.scitotenv.2016.03.248 ↗
7. A versatile TOCN/CGG self-assembling hydrogel for integrated wastewater treatment
8. Mass fraction characterization of N,N'-methylene bisacrylamide
9. Desorption of Methylene blue dye from brown macroalga: effects of operating parameters, isotherm study and kinetic modeling10.1016/j.jclepro.2017.03.119 ↗
10. Electrophoretically deposited halloysite nanotubes coating as the adsorbent for the removal of methylene blue from aqueous solution10.1016/j.jeurceramsoc.2018.03.048 ↗
11. Surface modification of malachite with ethanediamine and its effect on sulfidization flotation10.1016/j.apsusc.2017.12.113 ↗
12. Anionic polyacrylamide influence on the lead(II) ion accumulation in soil–the study on montmorillonite10.1007/s40201-020-00485-w ↗
13. A general kinetic model for adsorption: Theoretical analysis and modeling10.1016/j.molliq.2019.111100 ↗
14. Comparison of linearization methods for modeling the Langmuir adsorption isotherm10.1016/j.molliq.2019.111850 ↗
15. Radiation synthesis and characterization of super-absorbing hydrogel from natural polymers and vinyl monomer10.1016/j.envpol.2018.07.129 ↗
16. Multicomponent adsorption isotherm modeling using thermodynamically inconsistent and consistent models10.1002/aic.16727 ↗
17. Preparation of poly(acrylamide-co-acrylic acid)/silica nanocomposite microspheres and their performance as a plugging material for deep profile control10.1002/app.45502 ↗
18. Formation of complexes between functionalized chitosan membranes and copper: a study by angle resolved XPS10.1016/j.matchemphys.2016.10.018 ↗
19. Fabrication of calixarene-grafted magnetic nanocomposite for the effective removal of lead(II) from aqueous solution
20. Elucidation of lead ions adsorption mechanism on marmatite surface by PCA-assisted ToF-SIMS, XPS and zeta potential10.1016/j.mineng.2019.106035 ↗
21. A lignosulfonate-modified graphene hydrogel with ultrahigh adsorption capacity for Pb(II) removal10.1039/C6TA03779H ↗
22. Chitosan modification persimmon tannin bioadsorbent for highly efficient removal of Pb(II) from aqueous environment: the adsorption equilibrium, kinetics and thermodynamics10.1080/09593330.2017.1380712 ↗
23. Polyacrylic acid grafted silica fume as an excellent adsorbent for dysprosium(III) removal from industrial wastewater10.2166/wst.2018.022 ↗
24. Macroscopic and spectroscopic exploration on the removal performance of titanate nanotubes towards Zn(II)10.1016/j.molliq.2017.08.126 ↗
25. Acidity of edge surface sites of montmorillonite and kaolinite10.1016/j.gca.2013.04.008 ↗
26. Construction of layer-by-layer sandwiched graphene/polyaniline nanorods/carbon nanotubes heterostructures for high performance supercapacitors10.1016/j.electacta.2018.03.198 ↗
27. Exploration of a novel depressant polyepoxysuccinic acid for the flotation separation of pentlandite from lizardite slimes10.1016/j.clay.2020.105939 ↗
28. Synthesis of nanocomposites from polyacrylamide and graphene oxide: Application as flocculants for water purification10.1016/j.jcis.2016.11.096 ↗
29. Polypropylene/montmorillonite nanocomposites. Review of the synthetic routes and materials properties10.1021/cm0110627 ↗
30. Oxalate-enhanced solubility of lead (Pb) in the presence of phosphate: PH control on mineral precipitation10.1039/C8EM00553B ↗
31. Synthesis of poly(acrylamide-co-itaconic acid)/MWCNTs superabsorbent hydrogel nanocomposite by ultrasound-assisted technique: Swelling behavior and Pb (II) adsorption capacity10.1016/j.ultsonch.2017.12.028 ↗
32. XPS study on the mechanism of starch-hematite surface chemical complexation10.1016/j.mineng.2017.04.014 ↗
33. Recent progress of graphene-containing polymer hydrogels: preparations, properties, and applications10.1002/mame.201700184 ↗
34. EDTA-inspired polydentate hydrogels with exceptionally high heavy metal adsorption capacity as reusable adsorbents for wastewater purification10.1021/acsami.0c03689 ↗
35. N-doped reduced graphene oxide aerogel for the selective adsorption of oil pollutants from water: Isotherm and kinetic study10.1016/j.jiec.2017.12.041 ↗
36. Qualitative and quantitative sensitivity in flame photometry10.1016/0039-9140(66)80129-7 ↗
37. Microstructure, thermal and mechanical properties of composite films based on carboxymethylated nanocellulose and polyacrylamide10.1016/j.carbpol.2019.01.109 ↗
38. Halloysite-based hybrid bionanocomposite hydrogels as potential drug delivery systems10.1016/j.clay.2017.08.009 ↗
39. Ultrasound assisted polyacrylamide grafting on nano-fibrillated cellulose10.1016/j.carbpol.2017.11.042 ↗
40. Structural characterization of the organic/inorganic networks in the hybrid material (TMOS–TMSM–MMA)10.1016/S0924-2031(01)00158-8 ↗
41. Surface and interface chemistry of clay minerals
42. Superadsorbent hydrogel based on lignin and montmorillonite for Cu(II) ions removal from aqueous solution10.1016/j.ijbiomac.2019.01.058 ↗
43. Carbonyl functional group modified metal−organic coordination polymer with improved lithium-storage performance10.1021/acsaem.0c02303 ↗
44. Characterisation of acid activated montmorillonite clay from Tuulant (Mongolia)10.1016/S0272-8842(03)00096-8 ↗
45. Use of Al2(SO4)3 and acidified water glass as mixture depressants in flotation separation of fluorite from calcite and celestite10.1016/j.mineng.2019.04.011 ↗
46. Design and synthesis of graphene/SnO2/polyacrylamide nanocomposites as anode material for lithium-ion batteries10.1039/C8RA00958A ↗
47. Methylene blue removal from water using the hydrogel beads of poly(vinyl alcohol)-sodium alginate-chitosan-montmorillonite10.1016/j.carbpol.2018.06.124 ↗
48. Preparation and characterization of self-assembly hydrogels with exfoliated montmorillonite nanosheets and chitosan
49. Hydrogels for anion removal from water10.1039/C8TA10286D ↗
50. Synthesis of chitosan cross-linked 3D network-structured hydrogel for methylene blue removal10.1016/j.ijbiomac.2019.08.225 ↗
51. Pb(ΙΙ) removal from water using porous hydrogel of chitosan-2D montmorillonite10.1016/j.ijbiomac.2019.01.098 ↗
52. Synthesis of carboxymethyl cellulose-chitosan-montmorillonite nanosheets composite hydrogel for dye effluent remediation10.1016/j.ijbiomac.2020.09.154 ↗
53. High-performance two-dimensional montmorillonite supported-poly(acrylamide-co-acrylic acid) hydrogel for dye removal10.1016/j.envpol.2019.113574 ↗
54. Aggregation and thermal properties of nanostructured montmorillonite covered with mixed adsorption layers of cationic polyacrylamide and hazardous lead(II) ions10.1007/s13204-020-01460-5 ↗
55. Structural, thermal, and electrical characterization of layered nanocomposites derived from na-montmorillonite and polyethers10.1021/cm00030a019 ↗
56. Enhanced adsorption of Pb(II) onto modified hydrochar: modeling and mechanism analysis10.1016/j.biortech.2019.121593 ↗
57. Crystallization behavior of poly(ε-caprolactone)/layered double hydroxide nanocomposites10.1002/app.31787 ↗
58. The oxygen-rich pentaerythritol modified multi-walled carbon nanotube as an efficient adsorbent for aqueous removal of alizarin yellow R and alizarin red S10.1016/j.apsusc.2017.12.029 ↗
59. Efficient dewatering and heavy-metal removal in municipal sewage using oxidants10.1016/j.cej.2020.124298 ↗
60. Preparation and properties of polypropylene/montmorillonite layered nanocomposites10.1002/1097-0126(200012)49:12<1561::AID-PI509>3.0.CO;2-T ↗
61. Influence of fulvic acid on Pb(II)removal from water using a post-synthetically modified MIL-100(Fe)10.1016/j.jcis.2019.05.016 ↗
62. Vertically aligned janus MXene-based aerogels for solar desalination with high efficiency and salt resistance10.1021/acsnano.9b06180 ↗
63. Mechanism of carboxymethyl chitosan hybrid montmorillonite and adsorption of Pb(II) and Congo red by CMC-MMT organic-inorganic hybrid composite10.1016/j.ijbiomac.2020.01.201 ↗
64. Removal of Cd(II) and Fe(III) from DMSO by silica gel supported PAMAM dendrimers: Equilibrium, thermodynamics, kinetics and mechanism10.1016/j.ecoenv.2018.06.094 ↗