journal article·2009-04

Thermal stability of MoSi2-SiC composites in air at temperatures of 1100–1400°C

M. V. Sazonova, L. P. Efimenko

Glass Physics and Chemistry· Volume 35· Issue 2
Publisher page

Abstract

Composites x MoSi 2 -(100 − x )SiC are prepared over a wide composition range ( x = 10–90 mol %) by hot and cold pressing methods. The optimum pressing parameters (temperature, pressure, time) are determined. The heat resistance, the thermal stability, the porosity, and the phase composition of the composites are investigated after heat treatment for 100 h in an air atmosphere. Comparative data on the heat resistance and the porosity of the composites are analyzed as a function of the composition, the temperature (1100, 1400°C), and the preparation technique. The range of optimum compositions of the materials characterized by a low porosity and a high thermal stability is established.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. Samsonov, G.V., Dvorina, L.A., and Rud’, B.M., Silitsidy (Silicides), Moscow: Metallurgiya, 1979 [in Russian].
2. Bundschah, K., Schuze, M., Muller, C., Grail, P., and Heider, W., Selection of Materials for Use at Temperatures above 1500°C in Oxidizing Atmospheres, J. Eur. Ceram. Soc., 1988, vol. 18, no. 16, pp. 2389–2391.10.1016/S0955-2219(98)00247-7 ↗
3. Ma, C.-C.M., Tai, N.-H., Chang, W.-C., and Chao, H.-T., Microstructure and Oxidation Resistance of SiC Coated Carbon-Carbon Composites via Pressureless Reaction Sintering, J. Mater. Sci., 1996, vol. 31, no. 3, pp. 649–654.10.1007/BF00367881 ↗
4. Lorens, S. and Kempten, T., Flussigphassrter SiC-Formkorper mit verbesserter Bruchzahimgkeit sowie hohem elektrischen Widerstand und vervahren zen ihrer Herstellung, FGR Patent 199 331 944.
5. Shinoda, Y., Nagano, T., Gu, H., and Wakai, F., Superplasticity of Silicon Carbide, J. Am. Ceram. Soc., 1999, vol. 82, no 10, pp. 2916–2918.10.1111/j.1151-2916.1999.tb02178.x ↗
6. Zhu, Y.T., Stan, M., Conzone, S.D., and Butt, D.P., Thermal Oxidation Kinetics of MoSi2-Based Powders, J. Am. Ceram. Soc., 1999, vol. 82, no. 10, pp. 2785–2790.10.1111/j.1151-2916.1999.tb02156.x ↗
7. Lee, K.N. and Miller, R.A., Oxidation Behavior of Mullite-Coated SiC and SiC/SiC Composites under Thermal Cycling between Room Temperature and 1200–1400°C, J. Am. Ceram. Soc., 1996, vol. 79, no. 3, pp. 620–626.10.1111/j.1151-2916.1996.tb07920.x ↗
8. Vadusevan, A.K., A Comparative Review of Molybdenum Disilicide Composites, Mater. Sci. Eng. A, 1992, vol. 155, pp. 1–17.10.1016/0921-5093(92)90308-N ↗
9. Vasil’ev, Yu.V. and Kozlovskii, L.V., Opredelenie osnovnykh tekhnologicheskikh i fiziko-khimicheskikh svoistv syr’evykh materialov, primenyaemykh v keramicheskoi promyshlennosti: Metodicheskie ukazaniya (Determination of the Main Technological and Physicochemical Properties of Raw Materials Used in Ceramic Industry: A Methodical Manual), Leningrad: Leningr. Tekhnol. Inst. im. Lensoveta, 1991.