3D printing via the direct ink writing technique of ceramic pastes from typical formulations used in traditional ceramics industry
Source abstract
Abstract
Abstract This research presents an additive manufacturing study of a ceramic paste typically used in the ceramic industry. The 3D printing technique used was the direct ink writing (DIW) method, which is an extrusion based process. Several formulations were built with different volumetric fractions of solids with respect to water, all between 50% and 56%. Two types of additives (sodium silicate and sodium polyacrylate) were used with concentrations between 0.2 and 0.8 wt%. The printable pieces were those that were able to maintain the shape, have been sintered after the printing process and subjected to different tests. Dimension stability tests were conducted in order to determine the contraction after the air drying and fired process. Scanning electron microscopy, density, compression strength, x-ray diffraction, and rheology experiments were conducted over these successful formulations. Weibull analysis in the compression tests were made over the sintered samples as well.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Influence of carrier fluid on the electrokinetic and rheological properties of shear thickening fluids10.1016/j.ceramint.2017.06.092 ↗
2. Economics of additive manufacturing for end-usable metal parts10.1007/s00170-011-3878-1 ↗
3. The cost of additive manufacturing: machine productivity, economies of scale and technology-push10.1016/j.techfore.2015.02.015 ↗
4. 3-D printing: The new industrial revolution10.1016/j.bushor.2011.11.003 ↗
5. The kaolinite-mullite reaction series: II, metakaolin10.1111/j.1151-2916.1959.tb14315.x ↗
6. Materials science and engineering: an introduction
7. Reexamination of the kaolinite-to-mullite reaction series10.1111/j.1151-2916.1978.tb09264.x ↗
8. Pore structure and permeation properties of kaolin-silica-alumina ceramics10.2109/jcersj.111.537 ↗
9. Phase transformation and growth of mullite in kaolin ceramics10.1016/S0955-2219(03)00631-9 ↗
10. Chemically bonded phosphate ceramics composites reinforced with graphite nanoplatelets10.1016/j.compositesa.2010.12.007 ↗
11. 3D-printing of lightweight cellular composites10.1002/adma.201401804 ↗
12. From real soils to 3D-printed soils: reproduction of complex pore network at the real size in a silty-loam soil10.2136/sssaj2015.03.0097 ↗
13. Biosilicate® scaffolds produced by 3D-printing and direct foaming using preceramic polymers10.1111/jace.15948 ↗
14. Direct ink writing of geopolymeric inks10.1016/j.jeurceramsoc.2017.01.030 ↗
15. Graphene oxide: an all-in-one processing additive for 3D printing10.1021/acsami.7b07717 ↗
16. Influence of sodium silicate on the rheological behaviour of clay suspensions—application of the ternary Bingham model10.1016/0169-1317(88)90023-3 ↗
17. A novel freeform extrusion fabrication process for producing solid ceramic components with uniform layered radiation drying10.1016/j.addma.2017.04.001 ↗
18. Microstructural, physical and mechanical behavior of pastes containing clays and alumina waste10.1016/j.clay.2016.12.026 ↗
19. Hackley · 2001
20. Direct writing technology—Advances and developments10.1016/j.cirp.2008.09.006 ↗
21. Kingery · 1960
22. Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament10.1016/j.jclepro.2014.02.009 ↗
23. Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives10.1016/S0007-8506(07)60206-6 ↗
24. Direct ink writing of 3D functional materials10.1002/adfm.200600434 ↗
25. Direct ink writing of three-dimensional ceramic structures10.1111/j.1551-2916.2006.01382.x ↗
26. Characterization of zirconia specimens fabricated by ceramic on-demand extrusion10.1016/j.ceramint.2018.04.008 ↗
27. Fabricating functionally graded materials by ceramic on-demand extrusion with dynamic mixing
28. Mechanical properties of Zr-based bulk metallic glass parts fabricated by laser-foil-printing additive manufacturing10.1016/j.msea.2018.11.056 ↗
29. Influence of porosity and pore size on the compressive strength of porous hydroxyapatite ceramic10.1016/S0272-8842(96)00009-0 ↗
30. The formation of mullite from kaolinite under various reaction atmospheres10.1016/0955-2219(95)00143-3 ↗
31. 3D printing of high-strength aluminum alloys10.1038/nature23894 ↗
32. A comparative study of some kaolinites surface properties10.1016/j.clay.2019.03.005 ↗
33. Additive manufacturing: A framework for implementation10.1016/j.ijpe.2013.07.008 ↗
34. Measurement of tensile bond strength of 3D printed geopolymer mortar10.1016/j.measurement.2017.08.051 ↗
35. Composites of Portland cement and fibers of Guadua angustifolia Kunth from Colombia
36. 3D printing of kaolinite clay ceramics using the Direct Ink Writing (DIW) technique10.1016/j.ceramint.2017.12.219 ↗
37. Stabilization of kaolin clay slurry with sodium silicate of different silicate moduli10.1016/j.clay.2017.05.046 ↗
38. An overview of 3D printing technologies for food fabrication10.1007/s11947-015-1528-6 ↗
39. Differences in the rheology and surface chemistry of kaolin clay slurries: The source of the variations10.1016/j.ces.2009.05.015 ↗
40. An overview of Direct Laser Deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics10.1016/j.addma.2015.07.001 ↗
41. Additive manufacturing of ceramic-based materials10.1002/adem.201400097 ↗
42. Time-dependent rheology of clay particle-stabilised emulsions10.1016/j.clay.2014.03.005 ↗
43. Method of formulating geopolymer for 3D printing for construction applications10.1016/j.matdes.2016.07.136 ↗
44. Preparation of silicon carbide reticulated porous ceramics10.1016/S0921-5093(01)01352-1 ↗
45. Additive manufacturing of ceramics: issues, potentialities, and opportunities10.1111/jace.13700 ↗