Organoclays used as colloidal and rheological additives in oil-based drilling fluids: An overview
Source abstract
Abstract
The objective of this paper is to give an overview of the synthesis, properties of different organoclays, including organo-montmorillonite, organo-sepiolite and organo-palygorskite, and their use as rheological additives in oil-based drilling fluids. The researches performed until the present moment are described and summarized. A significant amount of work had been done in this area, including the rheological behavior at normal and high temperature, the structure changes of organoclays in oil-based system, thermal stability and the rheological mechanisms. The role of layered and fibrous organoclays in oil-based drilling fluids in the enhancement of the rheological properties and thermal stability is deeply reviewed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Drilling and Well Engineering · Grouting, Rheology, and Soil Mechanics · Mineral Processing and Grinding
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Effects of nano-sepiolite on rheological properties and filtration loss of water-based drilling fluids10.1002/sia.5997 ↗
2. Clay nanoparticles modified drilling fluids for drilling of deep hydrocarbon wells10.1016/j.clay.2013.10.017 ↗
3. Rheology of sodium and calcium bentonite-water dispersions: effect of electrolytes and aging time10.1016/j.minpro.2011.01.001 ↗
4. Removal of 2,4-dichlorophenoxyacetic acid from aqueous solutions by partially characterized organophilic sepiolite: thermodynamic and kinetic calculations10.1016/j.jcis.2004.08.080 ↗
5. Controlling bentonite-based drilling mud properties using sepiolite nanoparticles10.1016/S1876-3804(16)30084-2 ↗
6. Customization of sepiolite based drilling fluids at high temperatures
7. Investigating improved rheological and fluid loss performance of sepiolite muds under elevated temperatures
8. Sepiolite: Properties and uses10.1016/S0070-4571(08)70044-X ↗
9. Chapter 12 Current Industrial applications of Palygorskite and Sepiolite
10. Rheological and zeta potential behaviour of kaolin and bentonite composite slurries10.1016/j.colsurfa.2013.06.039 ↗
11. Characterization and 2, 4-D adsorption of sepiolite nanofibers modified by N-cetylpyridinium cations10.1016/j.micromeso.2012.09.022 ↗
12. Influence of morphology and surface charge on the suitability of palygorskite as drilling fluid10.1016/j.clay.2008.04.008 ↗
13. A review of fracturing fluid systems used for hydraulic fracturing of oil and gas wells10.1002/app.40735 ↗
14. On the impact of intermolecular interactions between the quaternary ammonium ions on interlayer spacing of quat-intercalated montmorillonite: a molecular mechanics and ab-initio study10.1016/j.clay.2014.04.035 ↗
15. Chapter 2 Organophilic clay minerals
16. Clays and Clay Minerals as Layered Nanofillers for (Bio)Polymers
17. Surface modification of clay minerals10.1016/S0169-1317(01)00063-1 ↗
18. Bland · 2006
19. Carbon-based composite materials for supercapacitor electrodes: a review10.1039/C7TA00863E ↗
20. The structural scheme of attapulgite
21. Chapter 2 Structures and Mineralogy of Clay Minerals10.1016/B978-0-08-098258-8.00002-X ↗
22. Drilling fluids: state of the art10.1016/0920-4105(95)00051-8 ↗
23. Caenn · 2011
24. Rheological properties of palygorskite-bentonite and sepiolite-bentonite mixed clay suspensions10.1016/j.clay.2013.12.013 ↗
25. Characterization of anion–cationic surfactants modified montmorillonite and its application for the removal of methyl orange10.1016/j.cej.2011.05.013 ↗
26. Preparation and characterization of anion-cation surfactants modified montmorillonite10.1007/s10973-007-8905-y ↗
27. Study on thermal properties of polyurethane nanocomposites based on organo-sepiolite10.1016/j.polymdegradstab.2011.12.025 ↗
28. Cheng · 2017
29. Crystal structure refinements of palygorskite and Maya Blue from molecular modelling and powder synchrotron diffraction10.1127/0935-1221/2003/0015-0021 ↗
30. Effects of exchanged cation and layer charge on the sorption of water and EGME vapors on montmorillonite clays10.1346/CCMN.1997.0450611 ↗
31. Solar energy conversion10.1063/1.2718755 ↗
32. Fractured shale-gas systems
33. Thermal stability of saudi palygorskite for drilling muds10.1180/claymin.1989.024.4.10 ↗
34. Thermal stability of drilling fluids prepared from saudi palygorskite10.2118/91-03-04 ↗
35. Drilling-fluid rheology under Deepwater drilling conditions10.2118/1199-0036-JPT ↗
36. Dino · 2007
37. Dino · 2013
38. Applications of nanotechnology in oil and gas industry10.1063/1.3669944 ↗
39. Montmorillonite modified by cationic and nonionic surfactants as high-performance fluid-loss-control additive in oil-based drilling fluids10.1080/01932691.2014.917052 ↗
40. Removal of humic acid by organo-montmorillonites: influence of surfactant loading and chain length of alkylammonium cations10.1007/s11270-014-1987-9 ↗
41. Investigation on the co-modification process of montmorillonite by anionic and cationic surfactants10.1016/j.clay.2016.08.025 ↗
42. Properties and applications of palygorskite-sepiolite clays10.1180/claymin.1996.031.4.01 ↗
43. Surface modification of sepiolite in aqueous gels by using methoxysilanes and its impact on the nanofiber dispersion ability10.1021/la104410r ↗
44. Influence of organic modifier characteristic on the mechanical properties of polyamide 6/organosepiolite nanocomposites10.1016/j.compositesb.2012.09.087 ↗
45. Effect of organic modification of sepiolite for PA 6 polymer/organoclay nanocomposites10.1016/j.compscitech.2010.05.020 ↗
46. Sepiolite–palygorskite: textural study and genetic considerations10.1016/j.clay.2013.09.013 ↗
47. Influence of organoclay prepared by solid state method on the morphology and properties of polyvinyl chloride/organoclay nanocomposites10.1177/0095244307084905 ↗
48. Preparation and properties of polypropylene/clay nanocomposites using an organoclay modified through solid state method10.1177/0731684407079493 ↗
49. Solar energy conversion by dye-sensitized photovoltaic cells10.1021/ic0508371 ↗
50. Nonionic organoclay: a ‘Swiss Army knife’ for the adsorption of organic micro-pollutants?10.1016/j.jcis.2014.09.043 ↗
51. The structures and microtextures of the palygorskite–sepiolite group minerals
52. Guven · 1981
53. Comparative rheology of water-based drilling fluids with various clays
54. Synthesis of organoclays: a critical review and some unresolved issues10.1016/j.clay.2014.02.008 ↗
55. Organoclays prepared from montmorillonites with different cation exchange capacity and surfactant configuration10.1016/j.clay.2009.11.024 ↗
56. Thermal analysis of montmorillonites modified with quaternary phosphonium and ammonium surfactants10.1016/j.clay.2006.09.005 ↗
57. Influence of viscosity modifier nature and concentration on the viscous flow behaviour of oil-based drilling fluids at high pressure10.1016/j.clay.2013.10.011 ↗
58. Influence of aqueous phase volume fraction, organoclay concentration and pressure on invert-emulsion oil muds rheology10.1016/j.jiec.2014.07.028 ↗
59. Organoclay influence on high pressure-high temperature volumetric properties of oil-based drilling fluids10.1016/j.petrol.2017.01.040 ↗
60. Hodge · 2017
61. House · 1984
62. Dry grinding of Ca and octadecyltrimethylammonium montmorillonite10.1016/j.jcis.2007.07.085 ↗
63. Adsorption studies of a water soluble dye, Reactive Red MF-3B, using sonication-surfactant-modified attapulgite clay10.1016/j.jhazmat.2006.09.088 ↗
64. Selective adsorption of tannin from flavonoids by organically modified attapulgite clay10.1016/j.jhazmat.2008.03.008 ↗
65. Removal of phenol from aqueous solution by adsorption onto OTMAC-modified attapulgite10.1016/j.jenvman.2006.05.007 ↗
66. Stabilization of the mixture of bentonite and sepiolite as a water based drilling fluid10.1016/j.petrol.2010.11.021 ↗
67. Selectivities in adsorption and peptidic condensation in the (arginine and glutamic acid)/montmorillonite clay system10.1021/jp507335e ↗
68. Synthesis, characterization and applications of 2:1 phyllosilicates and organophyllosilicates: contribution of fluoride to study the octahedral sheet
69. Organophilic clay-base thickeners
70. Mechanism of sorption of phenols from aqueous solutions onto surfactant-modified montmorillonite10.1006/jcis.2002.8629 ↗
71. Investigation of the orientation of CTA+ Ions in the interlayer of CTAB pillared montmorillonite
72. Natural gas hydrate as a storage mechanism for safe, sustainable and economical production from offshore petroleum reserves10.3390/en10060828 ↗
73. Solid-state intercalation of 8-hydroxyquinoline into Li (I)-, Zn (II)-and Mn (II)-montmorillonites10.1016/j.clay.2006.08.003 ↗
74. Shale problems and water-based drilling fluid optimisation in the Hassi Messaoud Algerian oil field10.1016/j.clay.2010.06.008 ↗
75. The economic impact of shale gas extraction: a review of existing studies10.1016/j.ecolecon.2011.02.005 ↗
76. Defects in microstructure in palygorskite–sepiolite minerals: a transmission electron microscopy (TEM) study10.1016/j.clay.2007.05.001 ↗
77. The Maya blue pigment
78. Chapter 10.3 Clay mineral–organic interactions10.1016/B978-0-08-098258-8.00015-8 ↗
79. Microstructural changes of reference montmorillonites by cationic surfactants10.1016/j.clay.2005.03.009 ↗
80. Reinforcement of polyurethane/epoxy interpenetrating network nanocomposites with an organically modified palygorskite10.1002/app.29360 ↗
81. Surface modification of sepiolite with quaternary amines10.1016/j.jcis.2005.05.080 ↗
82. Removal of anionic contaminants using surfactant-modified palygorskite and sepiolite10.1346/CCMN.2003.0510411 ↗
83. Heavy metal adsorbents mercapto and amino functionalized palygorskite: preparation and characterization10.1016/j.colsurfa.2013.03.014 ↗
84. Nanocomposite materials for the sodium–ion battery: a review10.1002/smll.201702514 ↗
85. Polymer modified clay minerals: a review10.1016/j.clay.2007.01.004 ↗
86. The colloidal and rheological properties of bentonite suspensions10.1016/S0001-8686(99)00005-6 ↗
87. Surfactant-modified montmorillonite by benzyloctadecyldimethylammonium chloride for removal of perchlorate10.1016/j.colsurfa.2015.06.025 ↗
88. Mainye, W., Teutsch, M., Brian, 2016. Syneristic organophilic clay mixture as an additive to oil-based drilling fluids, US20160186034A1.
89. Surface modification of sepiolite nanofibers with PEG based compounds to prepare polymer electrolytes10.1016/j.clay.2014.04.023 ↗
90. Effects of carbon ash on rheological properties of water-based drilling fluids10.1016/j.petrol.2012.11.011 ↗
91. The gelation of montmorillonite. Part 2.—the nature of the interparticle forces in sols of Wyoming bentonite10.1039/TF9575300548 ↗
92. The gelation of montmorillonite. Part 1.—the formation of a structural framework in sols of Wyoming bentonite10.1039/TF9575300535 ↗
93. Miller, J.J., 2009. Drilling Fluids Containing Biodegradable Organophilic Clay. US 7781379 B2.
94. Miller · 2011
95. Effect of chemical modification of palygorskite and sepiolite by 3-aminopropyltriethoxisilane on adsorption of cationic and anionic dyes10.1016/j.clay.2016.10.022 ↗
96. Overview—clay mineral applications10.1016/0169-1317(91)90014-Z ↗
97. Applied clay mineralogy today and tomorrow10.1180/000985599546055 ↗
98. Traditional and new applications for kaolin, smectite, and palygorskite: a general overview10.1016/S0169-1317(00)00016-8 ↗
99. Rheological properties of aqueous suspensions of palygorskite10.2136/sssaj2000.641427x ↗
100. Rheology of mixed palygorskite-montmorillonite suspensions10.1346/CCMN.2000.0480613 ↗