journal article·2015-12

Thermal properties of novel binary geopolymers based on metakaolin and alternative silica sources

Mónica A. Villaquirán-Caicedo, Ruby Mejía de Gutiérrez, Soumitra Sulekar, Calvin Davis, Juan C. Nino

Publisher page

Abstract

Abstract The objective of this study was to evaluate the thermal properties of geopolymers based on metakaolin (MK) and alternative silica-based activators. These activators were produced by mixing rice husk ash (RHA) and silica fume (SF) with potassium hydroxide (KOH). In addition, boiler slag (BS) was used as partial substitute for the MK aluminosilicates precursor. The thermo-physical properties of the geopolymers prepared with alternative activators were compared to geopolymers activated with commercial potassium silicate (KS). In general, thermal conductivity, diffusivity and specific heat are related to porosity of the geopolymer. The values of thermal conductivity were between 0.170–0.353 W/m·K. The coefficient of thermal expansion varies between 1.06 and 1.13 × 10 − 4 K − 1 and the thermal diffusivity was 0.16–0.27 mm 2 /s. The geopolymer with RHA (G-RHA) showed low bulk density (1338 kg/m 3 ) and high porosity (35%). Additionally this material has the lowest thermal conductivity (0.17 W/m·K) and thermal diffusivity (0.16 mm 2 /s). The results obtained show that geopolymers here developed can be considered potentially useful for applications such as thermal insulation. In addition, they constitute a better ecological choice because of the type of source of alkaline activator making their production environmentally friendly.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Geopolymer mortars based on a low grade metakaolin: Effects of the chemical composition, temperature and aggregate:binder ratio10.1016/j.conbuildmat.2013.10.023 ↗
2. Role of the silica source on the geopolymerization rate10.1016/j.jnoncrysol.2012.07.015 ↗
3. Thermal behaviour of inorganic geopolymers and composites derived from sodium polysialate10.1016/S0025-5408(02)01022-X ↗
4. Formation of Ceramics from Metakaolin-Based Geopolymers. Part II: K-based geopolymer10.1111/j.1551-2916.2008.02922.x ↗
5. Activation of Metakaolin/Slag Blends Using Alkaline Solutions Based on Chemically Modified Silica Fume and Rice Husk Ash10.1007/s12649-011-9093-3 ↗
6. CTE · 2010
7. Deabriges, J., 1982. Process for the manufacture of sodium silicate. US4336235 A.
8. Designing precursors for geopolymer cements10.1111/j.1551-2916.2008.02787.x ↗
9. Understanding the relationship between geopolymer composition, microstructure and mechanical properties10.1016/j.colsurfa.2005.06.060 ↗
10. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
11. Evolution of Gel Structure during Thermal Processing of Na-Geopolymer Gels10.1021/la0604026 ↗
12. Thermal Conductivity of Metakaolin Geopolymers Used as a First Approximation for Determining Gel Interconnectivity10.1021/ie060187o ↗
13. Thermal evolution of metakaolin geopolymers: part 1 — physical evolution10.1016/j.jnoncrysol.2006.09.019 ↗
14. Physical evolution of Na-geopolymer derived from metakaolin up to 1000°C10.1007/s10853-006-0535-4 ↗
15. The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers10.1016/j.colsurfa.2006.05.044 ↗
16. Life cycle inventories for the production of sodium silicates10.1007/BF02979498 ↗
17. Geopolymerization of a silica residue from waste treatment of chlorosilane production10.1617/s11527-012-9972-5 ↗
18. Effect of cesium substitution on the thermal evolution and ceramics formation of potassium-based geopolymer10.1016/j.ceramint.2010.07.015 ↗
19. Refractory materials from inorganic waste resources
20. Insulating behavior of metakaolin-based geopolymer materials assess with heat flux meter and laser flash techniques10.1007/s10973-011-1798-9 ↗
21. Bulk composition and microstructure dependence of effective thermal conductivity of porous inorganic polymer cements10.1016/j.jeurceramsoc.2011.12.030 ↗
22. Geopolymerisation: a review and prospects for the minerals industry10.1016/j.mineng.2007.07.011 ↗
23. Micromeritics®, 2011. ASAP 2020 Accelerated Surface Area and Porosimetry System.
24. Review on fly ash-based geopolymer concrete without Portland cement
25. Onori · 2011
26. A flash method of determining thermal diffusivity, heat capacity, and thermal conductivity
27. Silica fume as porogent agent in geo-materials at low temperature10.1016/j.jeurceramsoc.2010.01.014 ↗
28. Behavior of inorganic foam in solution
29. In situ inorganic foams prepared from various clays at low temperature10.1016/j.clay.2010.10.016 ↗
30. Alkali-activated metakaolin: a short guide for civil engineer — an overview10.1016/j.conbuildmat.2012.12.030 ↗
31. Thermal character of geopolymers synthesized from class F fly ash containing high concentrations of iron and α-quartz10.1111/j.1744-7402.2008.02328.x ↗
32. Compressive strength and degree of reaction of biomass- and fly ash-based geopolymer10.1016/j.conbuildmat.2009.09.002 ↗
33. TA, 2001. The Software Universal Analysis.
34. Preparation of metakaolin based geopolymer coatings on metal substrates as thermal barriers10.1016/j.clay.2009.08.015 ↗
35. Fly ash based geopolymer thin coatings on metal substrates and its thermal evaluation10.1016/j.jhazmat.2010.04.121 ↗
36. Preparation and thermal properties of fire resistant metakaolin-based geopolymer-type coatings10.1016/j.jnoncrysol.2010.09.063 ↗
37. Van Riessen · 2009
38. Evaluacion microestructural de geopolimeros basados en metacaolin y fuentes alternativas de silice expuestos a temperaturas altas
39. Rice husk ash paste and concrete: some aspects of hydration and the microstructure of the interfacial zone between the aggregate and paste10.1016/0008-8846(96)00061-0 ↗
40. Seeded crystallization of leucite10.1111/j.1551-2916.2007.01554.x ↗
41. Effectiveness of new silica fume alkali activator10.1016/j.cemconcomp.2005.07.004 ↗