journal article·2016-08-01Open access

High hole mobility p-type GaN with low residual hydrogen concentration prepared by pulsed sputtering

Yasuaki Arakawa, Kohei Ueno, Atsushi Kobayashi, Jitsuo Ohta, Hiroshi Fujioka

APL Materials· Volume 4· Issue 8

Abstract

We have grown Mg-doped GaN films with low residual hydrogen concentration using a low-temperature pulsed sputtering deposition (PSD) process. The growth system is inherently hydrogen-free, allowing us to obtain high-purity Mg-doped GaN films with residual hydrogen concentrations below 5 × 1016 cm−3, which is the detection limit of secondary ion mass spectroscopy. In the Mg profile, no memory effect or serious dopant diffusion was detected. The as-deposited Mg-doped GaN films showed clear p-type conductivity at room temperature (RT) without thermal activation. The GaN film doped with a low concentration of Mg (7.9 × 1017 cm−3) deposited by PSD showed hole mobilities of 34 and 62 cm2 V−1 s−1 at RT and 175 K, respectively, which are as high as those of films grown by a state-of-the-art metal-organic chemical vapor deposition apparatus. These results indicate that PSD is a powerful tool for the fabrication of GaN-based vertical power devices.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: GaN-based semiconductor devices and materials · Semiconductor materials and devices · Ga2O3 and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Industrial Science, The University of Tokyo, 4-6-1 Komaba, Meguro, Tokyo 153-8505, Japan

PRESTO, Japan Science and Technology Agency (JST), 4-1-8 Honcho, Kawaguchi, Saitama 332-0012, Japan

ACCEL, Japan Science and Technology Agency (JST), 5 Sanbancho, Chiyoda-ku, Tokyo 102-0075, Japan

Funding

Japan Science and Technology Agency (JST)

References (24)

Show source-provided references
1. 10.1143/APEX.3.08100110.1143/APEX.3.081001 ↗
2. 10.1063/1.494181410.1063/1.4941814 ↗
3. 10.1063/1.493743610.1063/1.4937436 ↗
4. 10.1109/TED.2014.236086110.1109/TED.2014.2360861 ↗
5. 10.7567/APEX.8.05410110.7567/APEX.8.054101 ↗
6. 10.1143/JJAP.31.L13910.1143/JJAP.31.L139 ↗
7. 10.1063/1.359396410.1063/1.3593964 ↗
8. 10.1109/JQE.2012.220379510.1109/JQE.2012.2203795 ↗
9. 10.1002/pssr.20130827510.1002/pssr.201308275 ↗
10. 10.1063/1.486428310.1063/1.4864283 ↗
11. 10.1038/srep0532510.1038/srep05325 ↗
12. 10.1063/1.487644910.1063/1.4876449 ↗
13. ASTM International, ASTM Standard F76, Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors (ASTM International, West Conshohocken, PA, 2011).
14. 10.1016/0022-0248(94)91053-710.1016/0022-0248(94)91053-7 ↗
15. 10.1063/1.144866610.1063/1.1448666 ↗
16. 10.1016/S0022-0248(98)00676-910.1016/S0022-0248(98)00676-9 ↗
17. 10.1063/1.37193910.1063/1.371939 ↗
18. 10.1063/1.494236910.1063/1.4942369 ↗
19. 10.1063/1.295308910.1063/1.2953089 ↗
20. 10.1063/1.12596610.1063/1.125966 ↗
21. 10.7567/JJAP.55.05FH0310.7567/JJAP.55.05FH03 ↗
22. 10.1063/1.37209810.1063/1.372098 ↗
23. 10.1063/1.11829310.1063/1.118293 ↗
24. 10.1063/1.490646410.1063/1.4906464 ↗