TiNi-based films for elastocaloric microcooling— Fatigue life and device performance
Source abstract
Abstract
The global trend of miniaturization and concomitant increase of functionality in microelectronics, microoptics, and various other fields in microtechnology leads to an emerging demand for temperature control at small scales. In this realm, elastocaloric cooling is an interesting alternative to thermoelectrics due to the large latent heat and good down-scaling behavior. Here, we investigate the elastocaloric effect due to a stress-induced phase transformation in binary TiNi and quaternary TiNiCuCo films of 20 μm thickness produced by DC magnetron sputtering. The mesoscale mechanical and thermal performance, as well as the fatigue behavior are studied by uniaxial tensile tests combined with infrared thermography and digital image correlation measurements. Binary films exhibit strong features of fatigue, involving a transition from Lüders-like to homogeneous transformation behavior within three superelastic cycles. Quaternary films, in contrast, show stable Lüders-like transformation without any signs of degradation. The elastocaloric temperature change under adiabatic conditions is −15 K and −12 K for TiNi and TiNiCuCo films, respectively. First-of-its-kind heat pump demonstrators are developed that make use of out-of-plane deflection of film bridges. Owing to their large surface-to-volume ratio, the demonstrators reveal rapid heat transfer. The TiNiCuCo-based devices, for instance, generate a temperature difference of 3.5 K within 13 s. The coefficients of performance of the demonstrators are about 3.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Advanced Thermoelectric Materials and Devices · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Karlsruhe Institute of Technology 1 Institute of Microstructure Technology, , P.O. Box 3640, 76021 Karlsruhe, Germany
University of Kiel 2 Institute for Materials Science, Faculty of Engineering, , 24143 Kiel, Germany
Karlsruhe Institute of Technology 3 Institute for Technical Physics, , P.O. Box 3640, 76021 Karlsruhe, Germany
Funding
Deutsche Forschungsgemeinschaft
References (28)
Show source-provided references
1. Adv. Eng. Mater. · 2012 · 14 · 1010.1002/adem.201100178 ↗
2. J. Mater. Chem. A · 2013 · 1 · 492510.1039/c3ta01289a ↗
3. Nat. Mater. · 2014 · 13 · 43910.1038/nmat3951 ↗
4. Phys. Today · 2015 · 68 · 4810.1063/PT.3.3022 ↗
5. Nat. Phys. · 2015 · 11 · 20410.1038/nphys3271 ↗
6. Appl. Phys. Lett. · 2012 · 101 · 07390410.1063/1.4746257 ↗
7. 2014
8. Funct. Mater. Lett. · 2009 · 2 · 7310.1142/S1793604709000594 ↗
9. Mater. Sci. Eng. · 2008 · 481-482 · 63910.1016/j.msea.2007.02.137 ↗
10. Acta Mater. · 2015 · 90 · 21310.1016/j.actamat.2015.02.029 ↗
11. Smart Mater. Struct. · 2013 · 22 · 03500710.1088/0964-1726/22/3/035007 ↗
12. Int. J. Refrig. · 2015 · 55 · 10210.1016/j.ijrefrig.2015.03.023 ↗
13. Int. J. Refrig. · 2015 · 56 · 6510.1016/j.ijrefrig.2015.04.001 ↗
14. Int. J. Refrig. · 2015 · 57 · 6210.1016/j.ijrefrig.2015.04.012 ↗
15. Adv. Energy Mater. · 2015 · 5 · 150036110.1002/aenm.201500361 ↗
16. Shape Mem. Superelasticity · 2015 · 1 · 13210.1007/s40830-015-0021-4 ↗
17. Design, development and testing of a compressive thermoelastic cooling prototype
18. Int. J. Refrig. · 2015 · 54 · 8810.1016/j.ijrefrig.2015.03.001 ↗
19. Nat. Nanotechnol. · 2009 · 4 · 21410.1038/nnano.2009.65 ↗
20. Microsyst. Technol. · 2011 · 17 · 128310.1007/s00542-011-1314-y ↗
21. Acta Mater. · 2014 · 81 · 910.1016/j.actamat.2014.08.006 ↗
22. Science · 2015 · 348 · 100410.1126/science.1261164 ↗
23. 2015 · 726
24. Adv. Eng. Mater. · 2013 · 15 · 6610.1002/adem.201200197 ↗
25. Shape Mem. Superelasticity · 2015 · 1 · 14210.1007/s40830-015-0014-3 ↗
26. Appl. Phys. Lett. · 2012 · 101 · 09190310.1063/1.4748307 ↗
27. Appl. Phys. Lett. · 2013 · 102 · 16191410.1063/1.4803168 ↗
28. Scr. Mater. · 2016 · 114 · 110.1016/j.scriptamat.2015.11.021 ↗