journal article·2024-08-05Open access

Oxygen Redox in Alkali-Ion Battery Cathodes

Ashok S. Menon, Matthew J.W. Ogley, Annalena R. Genreith-Schriever, Clare P. Grey, Louis F.J. Piper

Abstract

Current high-energy-density Li-ion batteries use stoichiometric Li 3d transition metal oxides as positive electrodes, which are conventionally described purely by transition-metal redox during routine operating windows. Their practical specific capacities (mAh/g) may be increased by widening their operational voltage window, using Li-excess compositions, or a combination of the two, both of which have shown increasing evidence of O participation in the charge-compensation mechanism. Understanding how this influences the electrochemical performance of these cathodes has been of great interest. Therefore, this review summarizes the current understanding of O participation in alkali-ion battery cathode charge compensation. Particular scrutiny is applied to the experimental observations and theoretical models used to explain the consequences of O participation in charge compensation. The charge-compensation mechanism of LiNiO2 is revisited to highlight the role of O hole formation during delithiation and is discussed within the wider context of Li-excess cathodes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

2The Faraday Institution, Didcot, United Kingdom

1Warwick Manufacturing Group, University of Warwick, Coventry, United Kingdom; email: Louis.Piper@warwick.ac.uk

3Yusuf Hamied Department of Chemistry, University of Cambridge, Cambridge, United Kingdom

References (100+)

Show source-provided references
1. From Li-ion batteries toward Na-ion chemistries: challenges and opportunities10.1002/aenm.202001310 ↗
2. Commercialization of lithium battery technologies for electric vehicles10.1002/aenm.201900161 ↗
3. Narrowing the gap between theoretical and practical capacities in Li-ion layered oxide cathode materials10.1002/aenm.201602888 ↗
4. 2015
5. Li-ion batteries: basics, progress, and challenges10.1002/ese3.95 ↗
6. Lithium batteries and cathode materials10.1021/cr020731c ↗
7. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
8. A reflection on lithium-ion battery cathode chemistry10.1038/s41467-020-15355-0 ↗
9. Solid state chemistry for developing better metal-ion batteries10.1038/s41467-020-18736-7 ↗
10. Material design concept of lithium-excess electrode materials with rocksalt-related structures for rechargeable non-aqueous batteries10.1002/tcr.201800089 ↗
11. The structural and chemical origin of the oxygen redox activity in layered and cation-disordered Li-excess cathode materials10.1038/nchem.2524 ↗
12. Trace doping of multiple elements enables stable battery cycling of LiCoO2 at 4.6V10.1038/s41560-019-0409-z ↗
13. Stabilizing the anionic redox in 4.6 V LiCoO2 cathode through adjusting oxygen magnetic moment10.1002/adfm.202202679 ↗
14. Oxygen-redox reactions in LiCoO2 cathode without O–O bonding during charge-discharge10.1016/j.joule.2021.01.006 ↗
15. Revisiting the charge compensation mechanisms in LiNi0.8Co0.2yAlyO2 systems10.1039/C9MH00765B ↗
16. Unraveling the cationic and anionic redox reactions in a conventional layered oxide cathode10.1021/acsenergylett.9b02147 ↗
17. Correlating the phase evolution and anionic redox in Co-free Ni-rich layered oxide cathodes10.1016/j.nanoen.2020.105365 ↗
18. Elucidating and mitigating high-voltage degradation cascades in cobalt-free LiNiO2 lithium-ion battery cathodes10.1002/adma.202106402 ↗
19. Oxygen-redox activity in non-lithium-excess tungsten-doped LiNiO2 cathode10.1103/PRXEnergy.2.013005 ↗
20. Reversible anionic redox activities in conventional LiNi1/3Co1/3Mn1/3O2 cathodes10.1002/anie.202001349 ↗
21. Origin and regulation of oxygen redox instability in high-voltage battery cathodes10.1038/s41560-022-01036-3 ↗
22. Anionic redox reaction and structural evolution of Ni-rich layered oxide cathode material10.1016/j.nanoen.2022.107335 ↗
23. Whither Mn oxidation in Mn-rich alkali-excess cathodes?10.1021/acsenergylett.0c02418 ↗
24. High reversibility of lattice oxygen redox quantified by direct bulk probes of both anionic and cationic redox reactions10.1016/j.joule.2018.11.014 ↗
25. Oxygen loss in layered oxide cathodes for Li-ion batteries: mechanisms, effects, and mitigation10.1021/acs.chemrev.1c00327 ↗
26. Fundamental understanding and practical challenges of anionic redox activity in Li-ion batteries10.1038/s41560-018-0097-0 ↗
27. Oxygen redox chemistry in rechargeable Li-ion and Na-ion batteries10.1016/j.matt.2020.12.004 ↗
28. Cationic and anionic redox in lithium-ion based batteries10.1039/C8CS00426A ↗
29. Utilizing oxygen redox in layered cathode materials from multiscale perspective10.1002/aenm.202003227 ↗
30. Pushing the limit of 3d transition metal-based layered oxides that use both cation and anion redox for energy storage10.1038/s41578-022-00416-1 ↗
31. Design rules for high-valent redox in intercalation electrodes10.1016/j.joule.2020.05.004 ↗
32. The role of O2 in O-redox cathodes for Li-ion batteries10.1038/s41560-021-00780-2 ↗
33. Molecular orbital principles of oxygen-redox battery electrodes10.1021/acsami.7b09835 ↗
34. Anionic redox in rechargeable batteries: mechanism, materials, and characterization10.1002/adfm.202303191 ↗
35. 2010
36. Anion–cation redox competition and the formation of new compounds in highly covalent systems10.1002/chem.19960020904 ↗
37. Character of holes in Li x Ni1− x O and their magnetic behavior10.1103/PhysRevLett.62.221 ↗
38. Soft-X-ray-absorption studies of the location of extra charges induced by substitution in controlled-valence materials10.1103/PhysRevB.44.5419 ↗
39. Electronic structure of CoO, Li-doped CoO, and LiCoO210.1103/PhysRevB.44.6090 ↗
40. Nickel K-edge X-ray absorption fine structure of lithium nickel oxides10.1021/ja00063a035 ↗
41. Study of the Jahn–Teller distortion in LiNiO2, a cathode material in a rechargeable lithium battery, by in situ X-ray absorption fine structure analysis10.1006/jssc.1998.7943 ↗
42. XAFS characterization of Li deintercalation in rechargeable lithium battery materials, LiCoO2-LiNiO2
43. In situ structural and electrochemical study of Ni1− x Co x O2 metastable oxides prepared by soft chemistry10.1006/jssc.1999.8465 ↗
44. In situ X-ray absorption studies of a high-rate LiNi0.85Co0.15O2 cathode material10.1149/1.1393624 ↗
45. Microscopy and spectroscopy of lithium nickel oxide-based particles used in high power lithium-ion cells10.1149/1.1613291 ↗
46. In-situ X-ray absorption spectroscopic study on variation of electronic transitions and local structure of LiNi1/3Co1/3Mn1/3O2 cathode material during electrochemical cycling10.1021/cm048027v ↗
47. Investigation of the charge compensation mechanism on the electrochemically Li-ion deintercalated Li1− x Co1/3Ni1/3Mn1/3O2 electrode system by combination of soft and hard X-ray absorption spectroscopy10.1021/ja0530568 ↗
48. Deciphering the oxygen absorption pre-edge: a caveat on its application for probing oxygen redox reactions in batteries10.1002/eem2.12119 ↗
49. Ab initio study of lithium intercalation in metal oxides and metal dichalcogenides10.1103/PhysRevB.56.1354 ↗
50. Identification of cathode materials for lithium batteries guided by first-principles calculations10.1038/33647 ↗
51. First-principles prediction of vacancy order-disorder and intercalation battery voltages in Li x CoO210.1103/PhysRevLett.81.606 ↗
52. Lithium metal rechargeable cells using Li2MnO3 as the positive electrode10.1016/S0378-7753(99)00066-X ↗
53. Layered cathode materials Li[Ni x Li(1/3−2 x /3)Mn(2/3− x /3)]O2 for lithium-ion batteries10.1149/1.1407994 ↗
54. Understanding the anomalous capacity of Li/Li[Ni x Li(1/3−2 x /3)Mn(2/3− x /3)]O2 cells using in situ X-ray diffraction and electrochemical studies10.1149/1.1480014 ↗
55. Li2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteries10.1039/b702425h ↗
56. Electrochemistry beyond Mn4+ in Li x Mn1− y Li y O2
57. Demonstrating oxygen loss and associated structural reorganization in the lithium battery cathode Li[Ni0.2Li0.2Mn0.6]O210.1021/ja062027+ ↗
58. Mechanisms associated with the “plateau” observed at high voltage for the overlithiated Li1.12(Ni0.425Mn0.425Co0.15)0.88O2 system10.1021/cm070435m ↗
59. Different oxygen redox participation for bulk and surface: a possible global explanation for the cycling mechanism of Li1.20Mn0.54Co0.13Ni0.13O210.1016/j.jpowsour.2013.02.075 ↗
60. Reversible anionic redox chemistry in high-capacity layered-oxide electrodes10.1038/nmat3699 ↗
61. Visualization of O-O peroxo-like dimers in high-capacity layered oxides for Li-ion batteries10.1126/science.aac8260 ↗
62. Oxygen K-edge X-ray absorption spectra10.1021/acs.chemrev.9b00439 ↗
63. Advances in soft X-ray RIXS for studying redox reaction states in batteries10.1039/D0DT01782E ↗
64. Resonant inelastic X-ray scattering studies of elementary excitations10.1103/RevModPhys.83.705 ↗
65. Charge-compensation in 3d-transition-metal-oxide intercalation cathodes through the generation of localized electron holes on oxygen10.1038/nchem.2471 ↗
66. Anion redox chemistry in the cobalt free 3d transition metal oxide intercalation electrode Li[Li0.2Ni0.2Mn0.6]O210.1021/jacs.6b05111 ↗
67. Coupling between oxygen redox and cation migration explains unusual electrochemistry in lithium-rich layered oxides10.1038/s41467-017-02041-x ↗
68. Full correction of the self-absorption in soft-fluorescence extended X-ray-absorption fine structure10.1103/PhysRevB.46.3283 ↗
69. Determination of absorption coefficients for concentrated samples by fluorescence detection10.1103/PhysRevB.47.14103 ↗
70. High-efficiency in situ resonant inelastic X-ray scattering (iRIXS) endstation at the Advanced Light Source10.1063/1.4977592 ↗
71. I21: an advanced high-resolution resonant inelastic X-ray scattering beamline at Diamond Light Source10.1107/S1600577522000601 ↗
72. First-cycle voltage hysteresis in Li-rich 3d cathodes associated with molecular O2 trapped in the bulk10.1038/s41560-020-00697-2 ↗
73. Redox chemistry and the role of trapped molecular O2 in Li-rich disordered rocksalt oxyfluoride cathodes10.1021/jacs.0c10270 ↗
74. Covalency does not suppress O2 formation in 4d and 5d Li-rich O-redox cathodes10.1038/s41467-021-23154-4 ↗
75. Improving the oxygen redox reversibility of Li-rich battery cathode materials via Coulombic repulsive interactions strategy10.1038/s41467-022-28793-9 ↗
76. Stabilizing the oxygen lattice and reversible oxygen redox chemistry through structural dimensionality in lithium-rich cathode oxides10.1002/anie.201900444 ↗
77. Bulk O2 formation and Mg displacement explain O-redox in Na0.67Mn0.72Mg0.28O210.1016/j.joule.2021.04.006 ↗
78. Dissociate lattice oxygen redox reactions from capacity and voltage drops of battery electrodes10.1126/sciadv.aaw3871 ↗
79. Anionic redox and electrochemical kinetics of the Na2Mn3O7 cathode material for sodium-ion batteries10.1021/acs.energyfuels.2c00148 ↗
80. Detection of trapped molecular O2 in a charged Li-rich cathode by neutron PDF10.1039/D1EE02237G ↗
81. Delocalized electron holes on oxygen in a battery cathode10.1038/s41560-023-01211-0 ↗
82. 17O NMR spectroscopy in lithium-ion battery cathode materials: challenges and interpretation10.1021/jacs.2c02927 ↗
83. Hidden structural and chemical order controls lithium transport in cation-disordered oxides for rechargeable batteries10.1038/s41467-019-08490-w ↗
84. Metal–oxygen decoordination stabilizes anion redox in Li-rich oxides10.1038/s41563-018-0276-1 ↗
85. Direct observation of reductive coupling mechanism between oxygen and iron/nickel in cobalt-free Li-rich cathode material: an in operando X-ray absorption spectroscopy study10.1002/aenm.202100479 ↗
86. Capturing dynamic ligand-to-metal charge transfer with a long-lived cationic intermediate for anionic redox10.1038/s41563-022-01278-2 ↗
87. Manganese oxidation as the origin of the anomalous capacity of Mn-containing Li-excess cathode materials10.1038/s41560-019-0439-6 ↗
88. A two-step oxidation mechanism controlled by Mn migration explains the first-cycle activation behavior of Li2MnO3-based Li-excess materials10.1021/acs.chemmater.0c03734 ↗
89. Quantifying the capacity contributions during activation of Li2MnO310.1021/acsenergylett.9b02799 ↗
90. Tomographic reconstruction of oxygen orbitals in lithium-rich battery materials10.1038/s41586-021-03509-z ↗
91. Multiorbital bond formation for stable oxygen-redox reaction in battery electrodes10.1039/C9EE04197D ↗
92. Delocalized metal–oxygen π-redox is the origin of anomalous nonhysteretic capacity in Li-ion and Na-ion cathode materials10.1021/jacs.0c10704 ↗
93. A theoretical framework for oxygen redox chemistry for sustainable batteries10.1038/s41893-022-00890-z ↗
94. Unified picture of anionic redox in Li/Na-ion batteries10.1038/s41563-019-0318-3 ↗
95. On the origin of reversible and irreversible reactions in LiNi x Co(1− x )/2Mn(1− x )/2O210.1149/1945-7111/ac3c21 ↗
96. Oxygen hole formation controls stability in LiNiO2 cathodes10.1016/j.joule.2023.06.017 ↗
97. Anionic redox induced anomalous structural transition in Ni-rich cathodes10.1039/D1EE02987H ↗
98. New insights into structural evolution of LiNiO2 revealed by operando neutron diffraction10.1002/batt.202100135 ↗
99. The role of anionic processes in Li1− x Ni0.44Mn1.56O4 studied by resonant inelastic X-ray scattering10.1039/D2YA00321J ↗
100. Insight into the role of metal–oxygen bond and O 2p hole in high-voltage cathode LiNi x Mn2– x O410.1021/acs.jpcc.7b03875 ↗