Natural weathering of polypropylene geotextiles treated with different chemical stabilisers
Source abstract
Abstract
Weathering (mainly due to solar radiation) may cause unwanted changes in the properties of geosynthetics, affecting their performance and shortening their lifetime. In this work, four nonwoven polypropylene geotextiles were exposed to natural weathering in Portugal during a maximum period of 3 years. The geotextiles were structurally identical, but had different known amounts of a hindered amine light stabiliser and carbon black in their composition. The damage suffered by the geotextiles (caused by weathering) was evaluated qualitatively (by visual inspection) and quantitatively by monitoring changes in their mechanical properties (tensile and static puncture tests). The results, among other findings, showed that: (1) weathering led to the deterioration of the mechanical properties of the geotextiles, (2) the behaviour of the geotextiles was highly dependent on their chemical composition, (3) the weathering resistance of the geotextiles was highly enhanced by the hindered amine light stabiliser and/or by carbon black, (4) a higher amount of the hindered amine light stabiliser (an increase from 0.2% to 0.4%, w/w) led to better weathering resistance and (5) the presence of carbon black (1.08%, w/w) in combination with the hindered amine light stabiliser (0.2%, w/w) resulted in the best protection against weathering.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Geotechnical Engineering and Soil Stabilization · Landfill Environmental Impact Studies · Microbial Applications in Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
CONSTRUCT-GEO, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal,(corresponding author)
CONSTRUCT-GEO, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal,
References (33)
Show source-provided references
1. 10.1007/978-94-011-5862-6_4610.1007/978-94-011-5862-6_46 ↗
2. 10.1007/978-94-011-5862-6_810.1007/978-94-011-5862-6_8 ↗
3. ASTM D4355
4. ASTM D5970
5. ASTM D7238
6. 10.1061/(ASCE)0733-9410(1991)117:7(979)10.1061/(ASCE)0733-9410(1991)117:7(979) ↗
7. 10.1515/SECM.2011.04710.1515/SECM.2011.047 ↗
8. 10.1016/j.conbuildmat.2014.10.00110.1016/j.conbuildmat.2014.10.001 ↗
9. Cazzuffi D. · 1986 · 695
10. 10.1016/j.geotexmem.2004.03.00110.1016/j.geotexmem.2004.03.001 ↗
11. EN 12224
12. EN ISO 9862
13. EN ISO 9863-1
14. EN ISO 9864
15. EN ISO 10319
16. EN ISO 12236
17. 10.1023/A:102114820536610.1023/A:1021148205366 ↗
18. 10.1680/gein.6.014610.1680/gein.6.0146 ↗
19. Gugumus F. · 2009 · 139
20. 10.1680/jgein.16.0002910.1680/jgein.16.00029 ↗
21. 10.1680/gein.2006.13.5.21010.1680/gein.2006.13.5.210 ↗
22. Ingold T. S. · 1994
23. Koerner R. M. · 1999
24. 10.1680/jgein.16.0002610.1680/jgein.16.00026 ↗
25. 10.1016/j.geotexmem.2013.07.00410.1016/j.geotexmem.2013.07.004 ↗
26. Montgomery D. C. · 2010
27. 10.1016/j.geotexmem.2012.07.00310.1016/j.geotexmem.2012.07.003 ↗
28. 10.1016/S0266-1144(02)00068-710.1016/S0266-1144(02)00068-7 ↗
29. Valente I. M. · 2010 · 785
30. 10.1080/0003271100378309310.1080/00032711003783093 ↗
31. Wright D. C. · 2001
32. Wypych G. · 2003
33. 10.1016/j.geotexmem.2005.11.00210.1016/j.geotexmem.2005.11.002 ↗