Statistical analysis of apparent morphology and characteristics of corroded rebars of concrete in the marine environment
Source abstract
Abstract
The residual cross-sectional areas of corroded rebars and their uniformity are the main indexes to evaluate the safety and durability of concrete structures in the marine environment. To evaluate corrosion characteristics of naturally corroded rebars, nineteen corroded rebars were extracted from the prototype components of a high-pile wharf with 35 years of service. The apparent morphology characteristics of corroded rebars were obtained using 3D scanning. The results indicate that the corrosion is non-uniform along both the longitudinal and cross-sectional directions of the corroded rebars. In the marine environment, the residual cross-sectional areas of corroded rebars along the length adhere to a three-parameter Weibull distribution; however, no specific probability distribution model or clear correlation with the distribution pattern exists for rebars with varying corrosion degrees. The spatial heterogeneity factors of the rebars are characterized by a three-parameter Frechet distribution.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Infrastructure Maintenance and Monitoring
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. 1989
2. Effect of degree of corrosion on the properties of reinforcing steel bars10.1016/s0950-0618(01)00009-5 ↗
3. Chloride-induced corrosion of steel reinforcement – mechanical performance and pit depth analysis10.1016/j.conbuildmat.2012.07.087 ↗
4. Physical model for steel corrosion in concrete sea structures - application10.1061/jsdeag.0005169 ↗
5. Corrosion-induced bond strength degradation in reinforced concrete - analytical and empirical models10.1016/j.nucengdes.2007.01.010 ↗
6. Probability distribution of pitting corrosion depth and rate in underground pipelines: a Monte Carlo study10.1016/j.corsci.2009.05.019 ↗
7. Modeling time-dependent circumferential non-uniform corrosion of steel bars in concrete considering corrosion-induced cracking effects10.1016/j.engstruct.2019.109766 ↗
8. Case studies of concrete deterioration in a marine environment in Portugal10.1016/s0958-9465(01)00037-3 ↗
9. Residual capacity of corroded reinforcing bars10.1680/macr.2005.57.3.135 ↗
10. A multidimensional version of the Kolmogorov–Smirnov test10.1093/mnras/225.1.155 ↗
11. Evaluation of corrosion level of naturally corroded bars using different cleaning methods, computed tomography, and 3D optical scanning10.1617/s11527-018-1206-z ↗
12. Impact of corrosion on mechanical properties of steel embedded in 27-year-old corroded reinforced concrete beams10.1617/s11527-012-9941-z ↗
13. Probabilistic model of the minimum effective cross-section area of non-uniform corroded steel bars10.1016/j.conbuildmat.2019.05.012 ↗
14. 2019
15. Comparison of rates of general corrosion and maximum pitting penetration on concrete embedded steel reinforcement10.1016/0008-8846(95)00006-2 ↗
16. Corrosion non-uniformity of steel bars and reliability of corroded RC beams10.1016/j.engstruct.2018.04.020 ↗
17. Study on experimental method and morphology of accelerated non-uniform corrosion of steel bars10.3785/j.issn.1008-973X.2020.03.008 ↗
18. Use of a 3D optical measurement technique for stochastic corrosion pattern analysis of reinforcing bars subjected to accelerated corrosion10.1016/j.corsci.2013.03.037 ↗
19. Experimental investigation of the spatial variability of the steel weight loss and corrosion cracking of reinforced concrete members: novel X-ray and digital image processing techniques10.1080/15732479.2016.1198397 ↗
20. Variation of steel loss and its effect on the ultimate flexural capacity of RC beams corroded and repaired under load10.1016/j.conbuildmat.2009.11.012 ↗
21. Effect of rusting of reinforcing steel on its mechanical properties and bond with concrete10.14359/1902 ↗
22. The comparison of GEV, log-pearson type 3 and Gumbel distributions in the upper thames river watershed under global climate models
23. Prediction of corrosion rate in reinforced concrete structures – a critical review and preliminary results10.1002/maco.201106282 ↗
24. Tensile behavior of naturally and artificially corroded steel bars10.1016/j.conbuildmat.2015.10.075 ↗
25. An innovative location-dependent stochastic model for prediction steel bars area under chloride ion attack in the presence of transverse rebars10.1016/j.conbuildmat.2022.127390 ↗
26. Confidence bands for quantile functions: a parametric and graphic alternative for testing goodness of fit10.2307/2685588 ↗
27. Pitting corrosion and structural reliability of corroding RC structures: experimental data and probabilistic analysis10.1016/j.ress.2006.12.013 ↗
28. Time-dependent reliability of deteriorating reinforced concrete bridge decks10.1016/s0167-4730(97)00021-0 ↗
29. Three-dimensional corrosion pit measurement and statistical mechanical degradation analysis of deformed steel bars subjected to accelerated corrosion10.1016/j.conbuildmat.2014.08.001 ↗
30. Corrosion-induced cracking of concrete elements exposed to a natural marine environment for five years10.5006/0844 ↗
31. Investigating the spatial development of corrosion of corner-located steel bar in concrete by X-ray computed tomography10.1016/j.conbuildmat.2019.06.023 ↗
32. Performance of corroded reinforced concrete columns under the action of eccentric loads10.1061/(asce)mt.1943-5533.0001352 ↗
33. A method for calculating quantile function and its further use for data fitting10.48550/arXiv.1508.06125 ↗
34. Fatigue behavior of reinforced concrete beams with corroded steel reinforcement
35. Comparison of two accelerated corrosion techniques for concrete structures10.14359/18624 ↗
36. Analytical model for the prediction of the tensile behaviour of corroded steel bars10.1016/j.conbuildmat.2020.120290 ↗
37. Characterization of steel reinforcement corrosion in concrete using 3D laser scanning techniques10.1016/j.conbuildmat.2020.121402 ↗
38. Concrete cover cracking with reinforcement corrosion of RC beam during chloride-induced corrosion process10.1016/j.cemconres.2009.09.026 ↗
39. Tensile and fatigue behavior of corroded rebars10.1016/j.conbuildmat.2012.02.071 ↗
40. Corrosion evolution of steel bars in RC structures based on Markov chain modeling10.1016/j.strusafe.2020.102037 ↗
41. Probability distribution model for cross-sectional area of corroded reinforcing steel bars10.1061/(asce)mt.1943-5533.0000888 ↗
42. Characteristics of pitting corrosion in an existing reinforced concrete beam exposed to marine environment10.1016/j.conbuildmat.2019.117392 ↗
43. Effect of corrosion of reinforcement on the mechanical behaviour of highly corroded RC beams10.1016/j.engstruct.2013.04.017 ↗