Simulation and analysis of residual stress in 17-7 PH stainless steel welded joints using laser shock peening technology
Source abstract
Abstract
To investigate the effect of power density on the residual stress distribution on the surface of 17-7 PH stainless steel welded joints during laser shock process, we utilized ABAQUS finite element software for analyzing its distribution under different laser shock power densities. The material was tested for residual stress using an X-ray stress diffractometer to verify the accuracy of the simulation results and lay the foundation for finding the optimal process parameters. The simulation results show that when the laser power density is 2.79 GW/cm2, the maximum residual compressive stress value on the surface of the sample after laser shock peening is −37.2 MPa; When the laser power density is 2.79 GW/cm2, the maximum residual compressive stress value on the surface of the sample is −94.1 MPa; When the power density reaches 5.17 GW/cm2, the maximum residual stress value on the surface of the laser shock peening sample is −144.8 MPa, and residual stress cavity is formed. The experimental results show that when the laser power density is 2.79 GW/cm2, the maximum residual compressive stress on the surface of the sample is −37.3 MPa; When the power density is 3.98 GW/cm2, the uniformity of compressive stress distribution on the surface of the sample is optimal, with a maximum residual compressive stress value of −99.0 MPa; When the power density is 5.17 GW/cm2, the maximum residual compressive stress value is −146.1 MPa, and residual stress cavity is formed on the material surface. The simulation results are close to the experimental results, and the model error ranges from 0.2% to 4.9%. The simulation results are accurate and reliable.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · High-Velocity Impact and Material Behavior · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. An inverse analysis to identify the Johnson-Cook constitutive model parameters for cold wire drawing process10.1051/meca/2020070 ↗
2. Behavior of basalt under laser-induced shock-wave application to the planetary hypervelocity impact effect10.2351/1.3556591 ↗
3. Experimental and numerical investigation on residual stress of 316L SS treated by different laser shock peening parameters10.1016/j.optlaseng.2024.108531 ↗
4. Formation mechanism and weights analysis of residual stress holes in E690 high-strength steel by laser shock peening10.3390/coatings12020285 ↗
5. Effect of laser shock peening uniformity on bending fatigue life of 20CrNiMo10.1016/j.optlastec.2024.110704 ↗
6. Physical study of laser-produced plasma in confined geometry10.1063/1.346783 ↗
7. Multi-scale simulation study on the evolution of stress waves and dislocations in Ti alloy during laser shock peening processing10.1016/j.optlastec.2023.109629 ↗
8. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures10.1016/0013-7944(85)90052-9 ↗
9. Formation mechanism of residual stress hole under different pulse durations and shock pressure distributions in Ti6Al4V alloy during laser peen texturing10.1016/j.optlastec.2020.106361 ↗
10. Effect of laser shock processing on residual stress evolution in martensitic stainless steel multi-pass butt-welded joints10.1088/2053-1591/acc63c ↗
11. Effect of laser shock peening on fatigue properties of U75VG rail flash-butt welding joints10.1016/j.optlastec.2022.107889 ↗
12. Effect of initial surface roughness on the actual intensity of laser shock processing10.1088/2051-672X/ab0d9d ↗
13. Dislocation mechanism of surface modification for commercial purity aluminum and aluminum alloy by laser shock processing10.3724/SP.J.1037.2013.00035 ↗
14. An investigation on the fatigue behavior of additively manufactured laser shock peened AlSi7Mg alloy surfaces10.1016/j.matchar.2023.112907 ↗
15. Numerical modeling of residual stress field for linear polarized laser oblique shock peening10.1016/j.ijleo.2019.04.083 ↗
16. Corrosion behavior of passivated CUSTOM450 and AM350 stainless steels for aeronautical applications10.3390/met12040666 ↗
17. Tailoring of residual stresses by specific use of defined prestress during laser shock peening10.1016/j.jmatprotec.2021.117154 ↗
18. Optimizing parameters with FEM model for 20CrMnTi laser shocking10.3390/ma16010328 ↗
19. Study on the microstructure and properties of welded joints of laser shock peening on HC420LA low-alloy high-tensile steel10.3390/ma16124238 ↗
20. The effect of laser shock peening on very high cycle fatigue properties of laser welded 2A60 aluminum alloy joints10.1016/j.engfracmech.2023.109537 ↗
21. Metallurgical analysis on a bending failed pump-shaft made of 17-7PH precipitation-hardening stainless steel10.1016/j.jmatprotec.2007.06.085 ↗
22. Cyclic plasticity of precipitation-hardenable stainless steel