Cutting performance optimization and experimental research of indexable insert drill
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Tunneling and Rock Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Venkatesh VC, Xue W (1996) A study of the built-up edge in drilling with indexable coated carbide inserts. J Mater Process Technol 58:379–38410.1016/0924-0136(95)02211-2 ↗
2. Grzesik W (1998) The role of coatings in controlling the cutting process when turning with coated indexable inserts. J Mater Process Technol 79:133–14310.1016/S0924-0136(97)00491-3 ↗
3. Jiang AS, Liu ZQ, Wang SQ et al (2023) Optimized design of indexable insert drill based on radial cutting force balance. Int J Adv Manuf Technol 128:2029–204110.1007/s00170-023-12063-z ↗
4. Yan X, Zhang K, Cheng H et al (2019) Force coefficient prediction for drilling of UD-CFRP based on FEM simulation of orthogonal cutting. Int J Adv Manuf Technol 104:3695–371610.1007/s00170-019-04048-8 ↗
5. Xiao Y, Hurich C, Molgaard J et al (2018) Investigation of active vibration drilling using acoustic emission and cutting size analysis. J Rock Mech Geotech 10(2):390–40110.1016/j.jrmge.2017.10.002 ↗
6. Okada M, Asakawa N, Sentoku E et al (2014) Cutting performance of an indexable insert drill for difficult-to-cut materials under supplied oil mist. Int J Adv Manuf Technol 72:475–48510.1007/s00170-014-5691-0 ↗
7. He Y, Xiao M, Ni H et al (2011) Study on cutting force and cutting temperature of coated carbide turning inserts with 3D chip-breaker. Adv Mater Res 314/316:909–91310.4028/www.scientific.net/AMR.314-316.909 ↗
8. Parsian A, Magnevall M, Beno T et al (2014) A mechanistic approach to model cutting forces in drilling with indexable inserts. Procedia CIRP 24:74–7910.1016/j.procir.2014.07.138 ↗
9. Muthuveerappan AL, Sivarajan S (2023) Finite element analysis of process parameters influences on deformation and von mises stress in drilling. Mater Today Proc. https://doi.org/10.1016/j.matpr.2023.05.11310.1016/j.matpr.2023.05.113 ↗
10. Aydin K, Akgün A, Yavas Ç et al (2021) Experimental and numerical study of cutting force performance of wave form end mills on gray cast iron. Arab J Sci Eng 46:12299–1230710.1007/s13369-021-05816-z ↗
11. Guo DM, Wen Q, Gao H et al (2011) Prediction of the cutting forces generated in the drilling of carbon-fibre-reinforced plastic composites using a twist drill. P I Mech Eng B-J Eng 226(1):28–42
12. Abele E, Fujara M (2010) Simulation-based twist drill design and geometry optimization. CIRP Ann 59(1):145–15010.1016/j.cirp.2010.03.063 ↗
13. Svensson D, Andersson T, Lassila AA (2022) Coupled Eulerian-Lagrangian simulation and experimental investigation of indexable drilling. Int J Adv Manuf Technol 121:471–48610.1007/s00170-022-09275-0 ↗
14. Gok K, Gok A, Kisioglu Y (2015) Optimization of processing parameters of a developed new driller system for orthopedic surgery applications using Taguchi method. Int J Adv Manuf Technol 76:1437–144810.1007/s00170-014-6327-0 ↗
15. Turkes E, Erdem M, Gok K et al (2020) Development of a new model for determine of cutting parameters in metal drilling processes. J Braz Soc Mech Sci Eng 42:169. https://doi.org/10.1007/s40430-020-2257-y10.1007/s40430-020-2257-y ↗
16. Uhlmann E, Kaulfersch F, Roeder M (2014) Turning of high-performance materials with rotating indexable inserts. Procedia CIRP 14:610–61510.1016/j.procir.2014.03.028 ↗
17. Gok A, Gologlu C, Demirci HI (2013) Cutting parameter and tool path style effects on cutting force and tool deflection in machining of convex and concave inclined surfaces. Int J Adv Manuf Technol 69:1063–107810.1007/s00170-013-5075-x ↗
18. Gok K, Erdem M, Kisioglu Y et al (2021) Development of bone chip-vacuum system in orthopedic drilling process. J Braz Soc Mech Sci Eng 43:224. https://doi.org/10.1007/s40430-021-02959-w10.1007/s40430-021-02959-w ↗
19. Li HZ, Zeng H, Chen XQ (2006) An experimental study of tool wear and cutting force variation in the end milling of Inconel 718 with coated carbide inserts. J Mater Process Technol 180(1/3):296–304
20. Chen T, Wang YS, Gao WJ et al (2020) Comparative study on the cutting performance of self-propelled rotary cutters and indexable cutters in milling TC11 titanium alloy. Int J Adv Manuf Technol 111:2749–275810.1007/s00170-020-06273-y ↗
21. Sultan AZ, Sharif S, Kurniawan D (2015) Chip formation when drilling AISI 316L stainless steel using carbide twist drill. Procedia Manuf 2:224–22910.1016/j.promfg.2015.07.039 ↗
22. Jie S, Tian H, Li J et al (2022) Study on the working performance of CrAlCN coated and uncoated carbide twist drill. Optik 270:169948. https://doi.org/10.1016/j.ijleo.2022.16994810.1016/j.ijleo.2022.169948 ↗
23. Geng D, Teng Y, Liu Y et al (2019) Experimental study on drilling load and hole quality during rotary ultrasonic helical machining of small-diameter CFRP holes. J Mater Process Technol 270:195–20510.1016/j.jmatprotec.2019.03.001 ↗
24. Dabade UA, Joshi SS, Ramakrishnan N (2003) Analysis of surface roughness and chip cross-sectional area while machining with self-propelled round inserts milling cutter. J Mater Process Technol 132(1/3):305–31210.1016/S0924-0136(02)00949-4 ↗
25. Gok A (2015) A new approach to minimization of the surface roughness and cutting force via fuzzy TOPSIS, multi-objective grey design and RSA. Measurement 70:100–10910.1016/j.measurement.2015.03.037 ↗
26. Chen G, Zou Y, Qin X et al (2020) Geometrical texture and surface integrity in helical milling and ultrasonic vibration helical milling of Ti-6Al-4V alloy. J Mater Process Technol 278:116494. https://doi.org/10.1016/j.jmatprotec.2019.11649410.1016/j.jmatprotec.2019.116494 ↗
27. Otoole L, Fang FZ (2023) Optimal tool design in micro-milling of difficult-to-machine materials. Adv Manuf 11:222–24710.1007/s40436-022-00418-w ↗