Mechanism of brittle fracture in diamond turning of microlens array on polymethyl methacrylate
Source abstract
Abstract
Diamond cutting is a popular method to fabricate microlens array (MLA) on polymethyl methacrylate (PMMA); however, it is limited by brittle fracture, which is formed easily on the surface of MLA during the cutting process. In this paper, the formation mechanism of the brittle fracture is studied via a series of experiments including the slow tool servo (STS) cutting experiment of MLA, surface scratching experiment and sudden-stop cutting experiment. The effects of undeformed chip thickness, feed rate, and machining track on brittle fracture formation are investigated in detail. In addition, based on the fracture formation mechanism, a bi-directional cutting approach is proposed to eliminate the regional brittle fracture of the microlens during diamond cutting. An experiment was then conducted to verify the method; the results demonstrated that bi-directional cutting could eliminate brittle fracture entirely. Finally, a spherical MLA with the form error (vPV) of 60 nm and the surface roughness (Ra) of 8 nm was successfully fabricated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Peter YA, Herzig HP, Dandliker R (2002) Microoptical fiber switch for a large number of interconnects: optical design considerations and experimental realizations using microlens arrays. IEEE J Sel Top Quantum 8(1):46–5710.1109/2944.991398 ↗
2. Borrelli NF, Morse DL, Bellman RH et al (1985) Photolytic technique for producing microlenses in photosensitive glass. Appl Opt 24(16):252010.1364/AO.24.002520 ↗
3. Mao M, Yan J (2016) Ductile machining of single-crystal silicon for microlens arrays by ultraprecision diamond turning using a slow tool servo. Int J Mach Tool Manuf 115:2–14
4. Deng Z, Yang Q, Chen F et al (2015) Fabrication of large-area concave microlens array on silicon by femtosecond laser micromachining. Opt Lett 40(9):1928–193110.1364/OL.40.001928 ↗
5. Wang Y, Li D, Luo C et al (2013) Viewing angle enhanced integral imaging display based on double-micro-lens array. J Soc Inf Display 21(7):289–29410.1002/jsid.178 ↗
6. Xie W, Wang QH, Wang YZ et al (2014) Depth-enhanced integral imaging system with convex and composite concave micro-lens arrays. Optik 125(20):6087–608910.1016/j.ijleo.2014.06.113 ↗
7. Ottevaere H, Cox R, Herzig HP et al (2007) Comparing glass and plastic refractive microlenses fabricated with different technologies. J Opt A Pure Appl Opt 8(2006):S407–S429
8. Popovic ZD, Sprague RA, Connell GA (1988) Technique for monolithic fabrication of microlens arrays. Appl Opt 27(7):1281–128410.1364/AO.27.001281 ↗
9. Croutxé-Barghorn C, Soppera O, Lougnot DJ (2001) Fabrication of refractive microlens arrays by visible, irradiation, of acrylic monomers: influence of photonic, parameters. Eur Phys J Appl Phys 13(1):31–3710.1051/epjap:2001110 ↗
10. Tripathi A, Chokshi TV, Chronis N (2009) A high numerical aperture, polymer-based, planar microlens array. Opt Express 17(22):19908–1991810.1364/OE.17.019908 ↗
11. He M, Yuan XC, Ngo NQ et al (2004) Single-step fabrication of a microlens array in sol gel material by direct laser writing and its application in optical coupling. J Opt A Pure Appl Opt 6(6):94–9710.1088/1464-4258/6/1/017 ↗
12. Wu D, Wu SZ, Niu LG et al (2010) High numerical aperture microlens arrays of close packing. Appl Phys Lett 97(3):031109-3
13. Koudriachov V, Cheong WC, Yu WX et al (2002) High sensitive SiO2/TiO2 hybrid sol-gel material for fabrication of 3 dimensional continuous surface relief diffractive optical elements by electron-beam lithography. Opt Express 10(14):586–59010.1364/OE.10.000586 ↗
14. Kuo WK, Kuo GF, Lin SY et al (2015) Fabrication and characterization of artificial miniaturized insect compound eyes for imaging. Bioinspir Biomim 10(5):05601010.1088/1748-3190/10/5/056010 ↗
15. Kuo WK, Hsu JJ, Nien CK et al (2016) Moth-eye-inspired biophotonic surfaces with antireflective and hydrophobic characteristics. ACS Appl Mater Interfaces 8(46):32021–3203010.1021/acsami.6b10960 ↗
16. Kuo WK, Lin SY, Hsu SW et al (2017) Fabrication and investigation of the bionic curved visual microlens array films. Opt Mater 66:630–63910.1016/j.optmat.2017.03.020 ↗
17. Yi AY, Li L (2005) Design and fabrication of a microlens array by use of a slow tool servo. Opt Lett 30(13):1707–170910.1364/OL.30.001707 ↗
18. Yu DP, Hong GS, Wong YS (2012) Profile error compensation in fast tool servo diamond turning of micro-structured surfaces. Int J Mach Tool Manuf 52(1):13–2310.1016/j.ijmachtools.2011.08.010 ↗
19. Yan J, Zhang Z, Kuriyagawa T et al (2010) Fabricating micro-structured surface by using single-crystalline diamond end mill. Int J Adv Manuf Technol 51(9–12):957–96410.1007/s00170-010-2695-2 ↗
20. Sumitomo T, Huang H, Zhou L (2011) Deformation and material removal in a nanoscale multi-layer thin film solar panel using nanoscratch. Int J Mach Tool Manuf 51(3):182–18910.1016/j.ijmachtools.2010.11.012 ↗
21. Arif M, Zhang X, Rahman M et al (2013) A predictive model of the critical undeformed chip thickness for ductile–brittle transition in nano-machining of brittle materials. Int J Mach Tool Manuf 64(4):114–12210.1016/j.ijmachtools.2012.08.005 ↗
22. Morris JC, Callahan DL, Kulik J et al (1995) Origins of the ductile regime in single-point diamond turning of semiconductors. J Am Ceram Soc 78(8):2015–202010.1111/j.1151-2916.1995.tb08612.x ↗
23. Puttick KE, Rudman MR, Smith KJ et al (1989) Single-point diamond machining of glasses. Proc R Soc Lond 426(1870):19–3010.1098/rspa.1989.0116 ↗
24. Blake PN, Scattergood RO (1990) Ductile-regime machining of germanium and silicon. J Am Ceram Soc 73(4):949–95710.1111/j.1151-2916.1990.tb05142.x ↗
25. Sreejith PS, Ngoi BKA (2001) Material removal mechanisms in precision machining of new materials. Int J Mach Tool Manuf 41(12):1831–184310.1016/S0890-6955(01)00014-1 ↗
26. Shaw MC (1995) Precision finishing. CIRP Ann Manuf Technol 44(1):343–34810.1016/S0007-8506(07)62339-7 ↗
27. Arai S, Wilson SA, Corbett J et al (2009) Ultra-precision grinding of PZT ceramics—surface integrity control and tooling design. Int J Mach Tool Manuf 49(12–13):998–100710.1016/j.ijmachtools.2009.05.013 ↗
28. Chen WK, Kuriyagawa T, Huang H et al (2005) Machining of micro aspherical mould inserts. Precis Eng 29(3):315–32310.1016/j.precisioneng.2004.11.002 ↗
29. Zhong Z, Venkatesh VC (1995) Semi-ductile grinding and polishing of ophthalmic aspherics and spherics. CIRP Ann Manuf Technol 44(1):339–34210.1016/S0007-8506(07)62338-5 ↗
30. Yin L, Spowage AC, Ramesh K et al (2004) Influence of microstructure on ultraprecision grinding of cemented carbides. Int J Mach Tool Manuf 44(5):533–54310.1016/j.ijmachtools.2003.10.022 ↗