An analytical method for assessing the initiation and interaction of cracks in fused silica subjected to contact sliding
Source abstract
Abstract
Understanding the fracture behavior of fused silica in contact sliding is important to the fabrication of damage-free optics. This study develops an analytical method to characterize the stress field in fused silica under contact sliding by extending the embedded center of dilation (ECD) model and considering the depth of yield region. The effects of densification on the stress fields were considered by scratch volume analysis and finite element analysis. Key mechanisms, such as crack initiation and morphology evolution were comprehensively investigated by analyzing the predicted stress fields and principal stress trajectories. The predictions were validated by Berkovich scratching experiment. It was found that partial conical, median and lateral cracks could emerge in the loading stage of the contact sliding, but radial and lateral cracks could be initiated during unloading. It was also found that the partial conical crack had the lowest initiation load. The intersection of long lateral cracks makes the material removal greater.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Metal and Thin Film Mechanics · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Campbell JH, Hawley-Fedder RA, Stolz CJ et al (2004) NIF optical materials and fabrication technologies: an overview. Proc Soc Photo-Opt Instrum 5341:84–10110.1117/12.538471 ↗
2. Shao JD, Dai YP, Xu Q (2012) Progress on the optical materials and components for the high power laser system in China. Proc SPIE. https://doi.org/10.1117/12.91110810.1117/12.911108 ↗
3. Criddle J, Nürnberg F, Sawyer R et al (2016) Fused silica challenges in sensitive space applications. SPIE Astron Telesc Instrum 9912:99120K. https://doi.org/10.1117/12.223166110.1117/12.2231661 ↗
4. Andrew N, Aleksandr E (2014) Overview of the optic component manufacturing and measurements for the advanced virgo optics. In: Processing of SPIE optical engineering applications, 17–21 August, San Diego, California. https://doi.org/10.1117/12.206222910.1117/12.2062229 ↗
5. Camp J, Billingsley G, Kells W et al (2001) LIGO optics: initial and advanced. SPIE Boulder Damage, 1–3 October 2001, Boulder. https://doi.org/10.1117/12.46168910.1117/12.461689 ↗
6. Suratwala T, Steele R, Feit MD et al (2008) Effect of rogue particles on the sub-surface damage of fused silica during grinding/polishing. J Non-Cryst Solids 354(18):2023–203710.1016/j.jnoncrysol.2007.11.015 ↗
7. Li L, Ge P (2022) Analytical modeling of the stress field in scratching anisotropic single-crystal silicon. Mater Sci Semicond Process 152:107099. https://doi.org/10.1016/j.mssp.2022.10709910.1016/j.mssp.2022.107099 ↗
8. Rouxel T (2015) Driving force for indentation cracking in glass: composition, pressure and temperature dependence. Philos Trans R Soc A 373:20140140. https://doi.org/10.1098/Rsta.2014.014010.1098/Rsta.2014.0140 ↗
9. Rouxel T, Ji H, Guin JP et al (2010) Indentation deformation mechanism in glass: densification versus shear flow. J Appl Phys 107:094903. https://doi.org/10.1063/1.340755910.1063/1.3407559 ↗
10. Sonneville C, Mermet A, Champagnon B et al (2012) Progressive transformations of silica glass upon densification. J Chem Phys 137:124505. https://doi.org/10.1063/1.475460110.1063/1.4754601 ↗
11. Möncke D, Lind F, Topper B et al (2021) Anomalous deformation behavior in ULE glass upon microindentation: a vibrational spectroscopic investigation in the induced structural changes of a Ti-silicate glass. J Phys Chem C 125(7):4183–419510.1021/acs.jpcc.0c09865 ↗
12. Rouxel T, Ji H, Hammouda T et al (2008) Poisson’s ratio and the densification of glass under high pressure. Phys Rev Lett 100:225501. https://doi.org/10.1103/Physrevlett.100.22550110.1103/Physrevlett.100.225501 ↗
13. Johnson KL (1987) Contact mechanics. Cambridge University Press, Cambridge, UK
14. Yoffe EH (1982) Elastic stress-fields caused by indenting brittle materials. Philos Mag A 46(4):617–62810.1080/01418618208236917 ↗
15. Wang W, Li Z, Yao P et al (2020) Sink-in/pile-up formation and crack nucleation mechanisms of high purity fused silica and soda-lime silica glass during nanoindentation experiments. Ceram Int 46(15):24698–2470910.1016/j.ceramint.2020.06.260 ↗
16. Ahn Y, Farris TN, Chandrasekar S (1998) Sliding microindentation fracture of brittle materials: role of elastic stress fields. Mech Mater 29(3/4):143–15210.1016/S0167-6636(98)00012-X ↗
17. Jing X, Maiti S, Subhash G (2007) A new analytical model for estimation of scratch-induced damage in brittle solids. J Am Ceram Soc 90(3):885–89210.1111/j.1551-2916.2006.01471.x ↗
18. Hu W, Teng Q, Hong T et al (2022) Stress field modeling of single-abrasive scratching of BK7 glass for surface integrity evaluation. Ceram Int 48(9):12819–1282810.1016/j.ceramint.2022.01.153 ↗
19. Wang W, Yao P, Wang J et al (2017) Elastic stress field model and micro-crack evolution for isotropic brittle materials during single grit scratching. Ceram Int 43(14):10726–1073610.1016/j.ceramint.2017.05.054 ↗
20. Jiang Q, Zhang L, Yang C (2022) Analysis of crack initiation load and stress field in double scratching of single crystal gallium nitride. Eng Fract Mech 274:108732. https://doi.org/10.1016/j.engfracmech.2022.10873210.1016/j.engfracmech.2022.108732 ↗
21. Gao S, Li H, Kang R et al (2021) Effect of strain rate on the deformation characteristic of AlN ceramics under scratching. Micromachines 12(1):77. https://doi.org/10.3390/mi1201007710.3390/mi12010077 ↗
22. Feng J, Huang X, Yang S et al (2021) Speed effect on the material behavior in high-speed scratching of BK7 glass. Ceram Int 47(14):19978–1998810.1016/j.ceramint.2021.04.008 ↗
23. Zhao F, Lin B, He Y et al (2022) Curvature effect induced cutting stress field offset and its influence on the damage of hard and brittle materials. J Mater Process Technol 303:117526. https://doi.org/10.1016/j.jmatprotec.2022.11752610.1016/j.jmatprotec.2022.117526 ↗
24. Feng J, Wan Z, Wang W et al (2020) Unique crack behaviors of glass BK7 occurred in successive double scratch under critical load of median crack initiation. J Eur Ceram Soc 40(8):3279–329010.1016/j.jeurceramsoc.2020.02.049 ↗
25. Li C, Zhang L, Sun L et al (2020) A finite element study on the effects of densification on fused silica under indentation. Ceram Int 46(17):26861–2687010.1016/j.ceramint.2020.07.162 ↗
26. Li C, Zhang L, Sun L et al (2019) A quantitative analysis of the indentation fracture of fused silica. J Am Ceram Soc 102(12):7264–727710.1111/jace.16645 ↗
27. Feng G, Qu S, Huang Y et al (2007) An analytical expression for the stress field around an elastoplastic indentation/contact. Acta Mater 55(9):2929–293810.1016/j.actamat.2006.12.030 ↗
28. Fang X, Li C, Sun L et al (2020) Hardness and friction coefficient of fused silica under scratching considering elastic recovery. Ceram Int 46(6):8200–820810.1016/j.ceramint.2019.12.048 ↗
29. Hamilton GM (1983) Explicit equations for the stresses beneath a sliding spherical contact. Proc Inst Mech Eng C J Mech Eng Sci 197(1):53–5910.1243/PIME_PROC_1983_197_076_02 ↗
30. Huang H, Lawn BR, Cook RF et al (2020) Critique of materials-based models of ductile machining in brittle solids. J Am Ceram Soc 103(11):6096–610010.1111/jace.17344 ↗
31. Bifano TG, Dow TA, Scattergood RO (1991) Ductile-regime grinding: a new technology for machining brittle materials. J Eng Ind 113(2):184–18910.1115/1.2899676 ↗
32. Oliver WC, Pharr GM (1992) An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments. J Mater Res 7(6):1564–158310.1557/JMR.1992.1564 ↗
33. Lambropoulos JC, Fang T, Funkenbusch PD et al (1996) Surface microroughness of optical glasses under deterministic microgrinding. Appl Opt 35(22):4448–446210.1364/AO.35.004448 ↗
34. Broitman E (2017) Indentation hardness measurements at macro-, micro-, and nanoscale: a critical overview. Tribol Lett 65:23. https://doi.org/10.1007/s11249-016-0805-510.1007/s11249-016-0805-5 ↗
35. Li C, Ma Y, Sun L et al (2022) An investigation into the densification-affected deformation and fracture in fused silica under contact sliding. Micromachines 13(7):1106. https://doi.org/10.3390/mi1307110610.3390/mi13071106 ↗
36. Sellappan P, Rouxel T, Celarie F et al (2013) Composition dependence of indentation deformation and indentation cracking in glass. Acta Mater 61(16):5949–596510.1016/j.actamat.2013.06.034 ↗
37. Yoshida S, Sangleboeuf JC, Rouxel T (2005) Quantitative evaluation of indentation-induced densification in glass. J Mater Res 20(12):3404–341210.1557/jmr.2005.0418 ↗
38. Zarudi I, Zhang LC, Zou J et al (2004) The R8–BC8 phases and crystal growth in monocrystalline silicon under microindentation with a spherical indenter. J Mater Res 19(1):332–33710.1557/jmr.2004.19.1.332 ↗
39. Liu M, Zheng Q, Gao C (2020) Sliding of a diamond sphere on fused silica under ramping load. Mater Today Commun 25:101684. https://doi.org/10.1016/j.mtcomm.2020.10168410.1016/j.mtcomm.2020.101684 ↗
40. Suratwala T, Wong L, Miller P et al (2006) Sub-surface mechanical damage distributions during grinding of fused silica. J Non-Cryst Solids 352(52):5601–561710.1016/j.jnoncrysol.2006.09.012 ↗