Prediction model for determining the optimum operational parameters in laser forming of fiber-reinforced composites
Source abstract
Abstract
Composite materials are widely employed in various industries, such as aerospace, automobile, and sports equipment, owing to their lightweight and strong structure in comparison with conventional materials. Laser material processing is a rapid technique for performing the various processes on composite materials. In particular, laser forming is a flexible and reliable approach for shaping fiber-metal laminates (FMLs), which are widely used in the aerospace industry due to several advantages, such as high strength and light weight. In this study, a prediction model was developed for determining the optimal laser parameters (power and speed) when forming FML composites. Artificial neural networks (ANNs) were applied to estimate the process outputs (temperature and bending angle) as a result of the modeling process. For this purpose, several ANN models were developed using various strategies. Finally, the achieved results demonstrated the advantage of the models for predicting the optimal operational parameters.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Laser and Thermal Forming Techniques · Advanced machining processes and optimization · Engineering Technology and Methodologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Gisario A, Mehrpouya M, Venettacci S et al (2016) Laser Origami (LO) of three-dimensional (3D) components: experimental analysis and numerical modelling. J Manuf Process 23:242–24810.1016/j.jmapro.2016.05.005 ↗
2. Edwardson S, Abed E, Carey C et al (2007) Key factors influencing the bend per pass in laser forming. In: International congress on applications of lasers & electro-optics, 2007, p 50610.2351/1.5061185 ↗
3. Gisario A, Mehrpouya M, Venettacci S et al (2017) Laser-assisted bending of titanium grade-2 sheets: experimental analysis and numerical simulation. Opt Lasers Eng 92:110–11910.1016/j.optlaseng.2016.09.004 ↗
4. Mehrpouya M, Huang H, Venettacci S et al (2019) LaserOrigami (LO) of three-dimensional (3D) components: experimental analysis and numerical modeling-part II. J Manuf Process 39:192–19910.1016/j.jmapro.2019.02.026 ↗
5. Gisario A, Barletta M (2018) Laser forming of glass laminate aluminium reinforced epoxy (GLARE): on the role of mechanical, physical and chemical interactions in the multi-layers material. Opt Lasers Eng 110:364–37610.1016/j.optlaseng.2018.06.013 ↗
6. Asundi A, Choi AY (1997) Fiber metal laminates: an advanced material for future aircraft. J Mater Process Technol 63:384–39410.1016/S0924-0136(96)02652-0 ↗
7. Vlot A, Vogelesang L, De Vries T (1999) Towards application of fibre metal laminates in large aircraft. Aircr Eng Aerosp Technol 71:558–57010.1108/00022669910303711 ↗
8. Le Bourlegat L, Damato C, Da Silva D et al (2010) Processing and mechanical characterization of titanium-graphite hybrid laminates. J Reinf Plast Compos 29:3392–340010.1177/0731684410377541 ↗
9. Zhang Q, Huang JQ, Qian WZ et al (2013) The road for nanomaterials industry: a review of carbon nanotube production, post-treatment, and bulk applications for composites and energy storage. Small 9:1237–126510.1002/smll.201203252 ↗
10. Hassani M, Hassani Y, Ajudanioskooei N et al (2017) Comparative study of bending angle in laser forming process using artificial neural network and fuzzy logic system. World Acad Sci Eng Technol Int J Math Comput Phys Electr Comput Eng 9:595–598
11. Selvakumar N, Ganesan P, Radha P et al (2007) Modelling the effect of particle size and iron content on forming of Al-Fe composite preforms using neural network. Mater Des 28:119–13010.1016/j.matdes.2005.05.004 ↗
12. Mishra R, Malik J, Singh I et al (2010) Neural network approach for estimating the residual tensile strength after drilling in uni-directional glass fiber reinforced plastic laminates. Mater Des 31:2790–279510.1016/j.matdes.2010.01.011 ↗
13. Jiang HJ, Liang LH, Xiao YL et al (2018) Three-dimensional transient thermodynamic analysis of laser surface treatment for a fiber laminated plate with a coating layer. Int J Heat Mass Transf 118:671–68510.1016/j.ijheatmasstransfer.2017.11.033 ↗
14. Jiang HJ, Liang LH, Ma L et al (2017) An analytical solution of three-dimensional steady thermodynamic analysis for a piezoelectric laminated plate using refined plate theory. Compos Struct 162:194–20910.1016/j.compstruct.2016.11.078 ↗
15. Mehrpouya M (2017) Laser welding of NiTi shape memory sheets: experimental analysis and numerical modeling. Dissertation, Sapienza University of Rome10.1016/j.optlastec.2018.06.038 ↗
16. Mehrpouya M, Shahedin AM, Daood SDS et al (2017) An investigation on the optimum machinability of NiTi based shape memory alloy. Mater Manuf Process 32(13):1497–150410.1080/10426914.2017.1279290 ↗
17. Mehrpouya M (2013) Modeling of machining perocess of nickel based shape memory alloy. Dissertation, Universiti Putra Malaysia
18. Mehrpouya M, Gisario A, Rahimzadeh A et al (2019) An artificial neural network model for laser transmission welding of biodegradable polyethylene terephthalate/polyethylene vinyl acetate (PET/PEVA) blends. Int J Adv Manuf Technol 102(5/8):1497–150710.1007/s00170-018-03259-9 ↗
19. Mehrpouya M, Gisario A, Rahimzadeh A et al (2019) A prediction model for finding the optimal laser parameters in additive manufacturing of NiTi shape memory alloy. Int J Adv Manuf Technol 105:4691–469910.1007/s00170-019-04596-z ↗
20. Hajian A, Styles P (2018) Prior applications of neural networks in geophysics. In: Application of soft computing and intelligent methods in geophysics. Springer, Cham, pp 71–19810.1007/978-3-319-66532-0_2 ↗
21. Lourakis M, Argyros A (2004) The design and implementation of a generic sparse bundle adjustment software package based on the levenberg-marquardt algorithm. Technical report 340, Institute of Computer Science-FORTH, Heraklion, Crete
22. Levenberg K (1944) A method for the solution of certain non-linear problems in least squares. Q Appl Math 2:164–16810.1090/qam/10666 ↗
23. Marquardt DW (1963) An algorithm for least-squares estimation of nonlinear parameters. J Soc Ind Appl Math 11:431–44110.1137/0111030 ↗
24. Moré JJ (1978) The Levenberg-Marquardt algorithm: implementation and theory. In: Numerical analysis. Springer, Berlin, Heidelberg, pp 105–11610.1007/BFb0067700 ↗
25. Mehrpouya M, Gisario A, Huang H et al (2019) Numerical study for prediction of optimum operational parameters in laser welding of NiTi alloy. Opt Laser Technol 118:159–16910.1016/j.optlastec.2019.05.010 ↗
26. Akbari M, Saedodin S, Panjehpour A et al (2016) Numerical simulation and designing artificial neural network for estimating melt pool geometry and temperature distribution in laser welding of Ti6Al4V alloy. Optik 127:11161–1117210.1016/j.ijleo.2016.09.042 ↗