Effects of tool coating and tool wear on the surface and chip morphology in side milling of Ti2AlNb intermetallic alloys
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced machining processes and optimization · Intermetallics and Advanced Alloy Properties · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Hukkerikar AV, Arrazola PJ, Aristimuño P et al (2023) A tribological characterisation of Ti-48Al-2Cr-2Nb and Ti-6Al-4V alloys with dry, flood, and MQL lubricants. CIRP J Manuf Sci Technol 41:501–52310.1016/j.cirpj.2022.11.016 ↗
2. He LJ, Su HH, Xu JH et al (2018) Inverse identification of constitutive parameters of Ti2AlNb intermetallic alloys based on cooperative particle swarm optimization. Chin J Aeronaut 31:1774–178510.1016/j.cja.2018.01.002 ↗
3. Xu RR, Li MQ, Zhao YH (2023) A review of microstructure control and mechanical performance optimization of γ-TiAl alloys. J Alloys Compd 932:167611. https://doi.org/10.1016/j.jallcom.2022.16761110.1016/j.jallcom.2022.167611 ↗
4. Anwar S, Ahmed N, Pervaiz S et al (2020) On the turning of electron beam melted gamma-TiAl with coated and uncoated tools: a machinability analysis. J Mater Process Technol 282:116664. https://doi.org/10.1016/j.jmatprotec.2020.11666410.1016/j.jmatprotec.2020.116664 ↗
5. Zhao B, Ding WF, Shan ZD et al (2023) Collaborative manufacturing technologies of structure shape and surface integrity for complex thin-walled components of aero-engine: status, challenge and tendency. Chin J Aeronaut 36:1–2410.1016/j.cja.2023.02.008 ↗
6. He LJ, Su HH, Xu JH et al (2017) Study on dynamic chip formation mechanisms of Ti2AlNb intermetallic alloy. Int J Adv Manuf Technol 92:4415–442810.1007/s00170-017-0527-3 ↗
7. Xi XX, Yu TY, Ding WF et al (2018) Grinding of Ti2AlNb intermetallics using silicon carbide and alumina abrasive wheels: tool surface topology effect on grinding force and ground surface quality. Precison Eng 53:134–14510.1016/j.precisioneng.2018.03.007 ↗
8. Xi XX, Ding WF, Fu YC et al (2018) Grindability evaluation and tool wear during grinding of Ti2AlNb intermetallics. Int J Adv Manuf Technol 94:1441–145010.1007/s00170-017-1005-7 ↗
9. Xia ZW, Gao GF, Wang Y et al (2023) Surface micro-texture and tribological properties in longitudinal-torsional ultrasonic-assisted milling Ti2AlNb. Int J Adv Manuf Technol 126:1919–193510.1007/s00170-023-11211-9 ↗
10. Salur E (2022) Understandings the tribological mechanism of Inconel 718 alloy machined under different cooling/lubrication conditions. Tribol Int 174:107677. https://doi.org/10.1016/j.triboint.2022.10767710.1016/j.triboint.2022.107677 ↗
11. Shokrani A, Al-Samarrai I, Newman ST (2019) Hybrid cryogenic MQL for improving tool life in machining of Ti-6Al-4V titanium alloy. J Manuf Process 43:229–24310.1016/j.jmapro.2019.05.006 ↗
12. Ma Z, Xu XW, Huang XH et al (2022) Cutting performance and tool wear of SiAlON and TiC-whisker-reinforced Si3N4 ceramic tools in side milling Inconel 718. Ceram Int 48:3096–310810.1016/j.ceramint.2021.10.084 ↗
13. Yuan ZJ, Gao GF, Wang Y et al (2022) Experimental study on a two-dimensional ultrasonic vibration platform and milling of Ti2AlNb intermetallic alloy. Int J Adv Manuf Technol 121:4187–420810.1007/s00170-022-09625-y ↗
14. Liu J, Chen GJ, Zhao LX et al (2023) Research status and development trend of cutting surface integrity of aerospace alloy materials. Int J Adv Manuf Technol 127:45–6310.1007/s00170-023-11558-z ↗
15. Chen HT, Liu ZB, Wang XB et al (2022) Effect of surface integrity on fatigue life of 2024 aluminum alloy subjected to turning. J Manuf Process 83:650–66610.1016/j.jmapro.2022.07.070 ↗
16. Liao ZR, Monaca A, Murray J et al (2021) Surface integrity in metal machining—Part I: fundamentals of surface characteristics and formation mechanisms. Int J Mach Tools Manuf 162:103687. https://doi.org/10.1016/j.ijmachtools.2020.10368710.1016/j.ijmachtools.2020.103687 ↗
17. Ross NS, Srinivasan N, Ananth MBJ et al (2023) Performance assessment of different cooling conditions in improving the machining and tribological characteristics of additively manufactured Al-Si-10Mg alloy. Tribol Int 186:108631. https://doi.org/10.1016/j.triboint.2023.10863110.1016/j.triboint.2023.108631 ↗
18. Yin XM, Liu YH, Zhao SC et al (2023) Tool wear and its effect on the surface integrity and fatigue behavior in high-speed ultrasonic peening milling of Inconel 718. Tribol Int 178:108070. https://doi.org/10.1016/j.triboint.2022.10807010.1016/j.triboint.2022.108070 ↗
19. Race A, Zwierzak I, Secker J et al (2021) Environmentally sustainable cooling strategies in milling of SA516: effects on surface integrity of dry, flood and MQL machining. J Clean Prod 288:125580. https://doi.org/10.1016/j.jclepro.2020.12558010.1016/j.jclepro.2020.125580 ↗
20. Oliveira ARF, da Silva LRR, Baldin V et al (2021) Effect of tool wear on the surface integrity of Inconel 718 in face milling with cemented carbide tools. Wear 476:203752. https://doi.org/10.1016/j.wear.2021.20375210.1016/j.wear.2021.203752 ↗
21. Wang YS, Zou B, Wang JC et al (2020) Effect of the progressive tool wear on surface topography and chip formation in micro-milling of Ti-6Al-4V using Ti(C7N3)-based cermet micro-mill. Tribol Int 141:105900. https://doi.org/10.1016/j.triboint.2019.10590010.1016/j.triboint.2019.105900 ↗
22. Liu QM, Xu JK, Yu HD et al (2020) Experimental study of tool wear and its effects on cutting process of ultrasonic-assisted milling of Ti-6Al-4V. Int J Adv Manuf Technol 108:2917–292810.1007/s00170-020-05593-3 ↗
23. Wang ZH, Liu YW (2020) Study of surface integrity of milled gamma titanium aluminide. J Manuf Process 56:806–81910.1016/j.jmapro.2020.05.021 ↗
24. Priarone PC, Rizzuti S, Rotella G et al (2012) Tool wear and surface quality in milling of a gamma-TiAl intermetallic. Int J Adv Manuf Technol 61:25–3310.1007/s00170-011-3691-x ↗
25. Klocke F, Settineri L, Lung D et al (2013) High performance cutting of gamma titanium aluminides: influence of lubricoolant strategy on tool wear and surface integrity. Wear 302:1136–114410.1016/j.wear.2012.12.035 ↗
26. Priarone PC, Rizzuti S, Settineri L et al (2012) Effects of cutting angle, edge preparation, and nano-structured coating on milling performance of a gamma titanium aluminide. J Mater Process Technol 212:2619–262810.1016/j.jmatprotec.2012.07.021 ↗
27. Hussain A, Layegh SE, Lazoglu I et al (2020) Mechanics of milling 48-2-2 gamma titanium aluminide. CIRP J Manufact Sci Technol 30:131–13910.1016/j.cirpj.2020.05.001 ↗
28. Hood R, Aspinwall DK, Soo SL et al (2014) Workpiece surface integrity when slot milling γ-TiAl intermetallic alloy. CIRP Ann Manuf Technol 63:53–5610.1016/j.cirp.2014.03.071 ↗
29. Hood R, Aspinwall DK, Sage C et al (2013) High speed ball nose end milling of γ-TiAl alloys. Intermetallics 32:284–29110.1016/j.intermet.2012.09.011 ↗
30. Ren JX, Zhai ZY, Shi KN et al (2018) Tool determination and geometry parameter optimization of carbide tool in high-speed milling of third-generation γ-TiAl alloy. J Braz Soc Mech Sci Eng 40:491. https://doi.org/10.1007/s40430-018-1408-x10.1007/s40430-018-1408-x ↗
31. Liang XL, Zhang CB, Wang CJ et al (2023) Tool wear mechanisms and surface quality assessment during micro-milling of high entropy alloy FeCoNiCrAlx. Tribol Int 178:108053. https://doi.org/10.1016/j.triboint.2022.10805310.1016/j.triboint.2022.108053 ↗
32. Chen T, Wang YS, Gao WJ et al (2020) Comparative study on the cutting performance of self-propelled rotary cutters and indexable cutters in milling TC11 titanium alloy. Int J Adv Manuf Technol 111:2749–275810.1007/s00170-020-06273-y ↗
33. Chaus AS, Sitkevich MV, Pokorný P et al (2021) Wear resistance and cutting performance of high-speed steel ball nose end mills related to the initial state of tool surface. Wear 472/473:203711. https://doi.org/10.1016/j.wear.2021.20371110.1016/j.wear.2021.203711 ↗
34. Chen T, Liu JQ, Liu G et al (2023) Experimental study on titanium alloy cutting property and wear mechanism with circular-arc milling cutters. Chin J Mech Eng 36:1–1110.3901/JME.2000.04.001 ↗
35. Wang FZ, Ji KX, Guo ZY (2020) Microstructural analysis of failure progression for coated carbide tools during high-speed milling of Ti-6Al-4V. Wear 456/457:203356. https://doi.org/10.1016/j.wear.2020.20335610.1016/j.wear.2020.203356 ↗
36. Jiang EL, Huang LK, Jiang F (2020) Research on the tool wear mechanism of the wave-edge end mill based on the tool-chip contact analysis. Int J Adv Manuf Technol 108:801–80810.1007/s00170-020-05424-5 ↗
37. Gdula M, Mrówka-Nowotnik G (2023) Analysis of tool wear, chip and machined surface morphology in multi-axis milling process of Ni-based superalloy using the torus milling cutter. Wear 520/521:204652. https://doi.org/10.1016/j.wear.2023.20465210.1016/j.wear.2023.204652 ↗