Study on a probabilistic algorithm for the forming and 3D characterization of special-shaped surfaces under profile grinding
Source abstract
Abstract
Profile grinding is the most crucial method for the ultra-precision machining of special-shaped surfaces. However, profile grinding produces a unique machining profile, and many random factors in the machining process lead to complex surface characteristics. In this study, the structural and probabilistic characteristics of the profile grinding of a special-shaped surface were analyzed, and a probabilistic algorithm for the forming and 3D characterization of special-shaped surfaces under profile grinding was developed. The forming process of a GH738 blade tenon tooth surface was considered as an example to demonstrate the algorithm. The comparison results showed that the simulation results had similar surface characteristics to the measurement results, and the relative error range of the 3D roughness parameter was 0.21%–19.76%, indicating an accurate prediction and characterization of the complex special-shaped surface under the action of multiple factors.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Advanced Measurement and Metrology Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Chen T, Miao Q, Xiong M et al (2022) On the residual stresses of turbine blade root of γ-TiAl intermetallic alloys induced by non-steady-state creep feed profile grinding. J Manuf Process 82:800–81710.1016/j.jmapro.2022.08.051 ↗
2. Kuang W, Miao Q, Ding W et al (2021) Fretting wear behaviour of machined layer of nickel-based superalloy produced by creep-feed profile grinding. Chin J Aeronaut 35(10):401–41110.1016/j.cja.2021.10.007 ↗
3. Grimmert A, Wiederkehr P (2021) Macroscopic process simulation of surface and profile grinding processes estimating forces for the production of turbine blades. Procedia CIRP 102:126–13110.1016/j.procir.2021.09.022 ↗
4. Zhao Z, Qian N, Ding W et al (2020) Profile grinding of DZ125 nickel-based superalloy: grinding heat, temperature field, and surface quality. J Manuf Process 57:10–2210.1016/j.jmapro.2020.06.022 ↗
5. Xi X, Ding W, Wu Z et al (2021) Performance evaluation of creep feed grinding of γ-TiAl intermetallics with electroplated diamond wheels. Chin J Aeronaut 34(6):100–10910.1016/j.cja.2020.04.031 ↗
6. Schieber C, Hettig M, Zaeh M et al (2021) Evaluation of approaches to compensate the thermo-mechanical distortion effects during profile grinding. Procedia CIRP 102:331–33610.1016/j.procir.2021.09.057 ↗
7. Guba N, Heinzel J, Heinzel C et al (2020) Grinding burn limits: Generation of surface layer modification charts for discontinuous profile grinding with analogy trials. CIRP J Manuf Sci Tec 31:99–10710.1016/j.cirpj.2020.09.014 ↗
8. Kuang W, Miao Q, Ding W et al (2021) Residual stresses of turbine blade root produced by creep-feed profile grinding: three-dimensional simulation based on workpiece-grain interaction and experimental verification. J Manuf Process 62:67–7910.1016/j.jmapro.2020.11.045 ↗
9. He Y, Xiao G, Zhu S et al (2023) Surface formation in laser-assisted grinding high-strength alloys. Int J Mach Tool Manu 186:104002. https://doi.org/10.1016/j.ijmachtools.2023.10400210.1016/j.ijmachtools.2023.104002 ↗
10. Liu S, Xiao G, Lin O et al (2023) A new one-step approach for the fabrication of microgrooves on Inconel 718 surface with microporous structure and nanoparticles having ultrahigh adhesion and anisotropic wettability: laser belt processing. Appl Surf Sci 607:155108. https://doi.org/10.1016/j.apsusc.2022.15510810.1016/j.apsusc.2022.155108 ↗
11. Sun C, Xiu S, Hong Y et al (2020) Prediction on residual stress with mechanical-thermal and transformation coupled in DGH. Int J Mech Sci 179:105629. https://doi.org/10.1016/j.ijmecsci.2020.10562910.1016/j.ijmecsci.2020.105629 ↗
12. Li C, Piao Y, Zhang F et al (2023) Understand anisotropy dependence of damage evolution and material removal during nanoscratch of MgF2 single crystals. Int J Extrem Manuf 5(1):015101. https://doi.org/10.1088/2631-7990/ac9eed10.1088/2631-7990/ac9eed ↗
13. Li C, Hu Y, Zhang F et al (2023) Molecular dynamics simulation of laser assisted grinding of GaN crystals. Int J Mech Sci 239:107856. https://doi.org/10.1016/j.ijmecsci.2022.10785610.1016/j.ijmecsci.2022.107856 ↗
14. Miao Q, Ding W, Kuang W et al (2021) Grinding force and surface quality in creep feed profile grinding of turbine blade root of nickel-based superalloy with microcrystalline alumina abrasive wheels. Chin J Aeronaut 34(2):576–58510.1016/j.cja.2019.11.006 ↗
15. Xiao Y, Wang S, Ma C et al (2022) Numerical modeling of material removal mechanism and surface topography for gear profile grinding. J Manuf Process 76:719–73910.1016/j.jmapro.2022.02.052 ↗
16. Feng H, Xiang D, Wu B et al (2019) Ultrasonic vibration-assisted grinding of blind holes and internal threads in cemented carbides. Int J Adv Manuf Tech 104(1/4):1357–136710.1007/s00170-019-04024-2 ↗
17. Lei X, Xiang D, Peng P et al (2021) Establishment of dynamic grinding force model for ultrasonic-assisted single abrasive high-speed grinding. J Mater Process Tech 300:117420. https://doi.org/10.1016/j.jmatprotec.2021.11742010.1016/j.jmatprotec.2021.117420 ↗
18. Yang Z, He D, Wang S et al (2021) Determination of the grinding force on optical glass based on a diamond wheel with an ordered arrangement of abrasive grains. Int J Adv Manuf Tech 115(4):1237–124810.1007/s00170-021-07204-1 ↗
19. Zhao B, Guo X, Bie W et al (2020) Thermo-mechanical coupling effect on surface residual stress during ultrasonic vibration-assisted forming grinding gear. J Manuf Process 59:19–3210.1016/j.jmapro.2020.09.041 ↗
20. Li C, Li X, Wu Y et al (2019) Deformation mechanism and force modelling of the grinding of YAG single crystals. Int J Mach Tool Manu 143:23–3710.1016/j.ijmachtools.2019.05.003 ↗
21. Agarwal S, Rao P (2012) Predictive modeling of undeformed chip thickness in ceramic grinding. Int J Mach Tool Manu 56:59–6810.1016/j.ijmachtools.2012.01.003 ↗
22. Yu S, Yao P, Ye Z et al (2022) Simulation and experimental research of tool path planning on profile and surface generation of aspherical-cylindrical lens array by ultra-precision envelope grinding. J Mater Process Tech 307:117690. https://doi.org/10.1016/j.jmatprotec.2022.11769010.1016/j.jmatprotec.2022.117690 ↗
23. Zhang Z, Yao P, Wang J et al (2019) Analytical modeling of surface roughness in precision grinding of particle reinforced metal matrix composites considering nanomechanical response of material. Int J Mech Sci 157/158:243–25310.1016/j.ijmecsci.2019.04.047 ↗
24. Hong Y, Sun C, Xiu S et al (2023) Strengthening surface generation mechanism of carburizing-assisted grinding. Tribol Int 180:108300. https://doi.org/10.1016/j.triboint.2023.10830010.1016/j.triboint.2023.108300 ↗
25. Li C, Piao Y, Meng B et al (2022) Phase transition and plastic deformation mechanisms induced by self-rotating grinding of GaN single crystals. Int J Mach Tool Manu 172:103827. https://doi.org/10.1016/j.ijmachtools.2021.10382710.1016/j.ijmachtools.2021.103827 ↗
26. Chen H, Tang J, Zhou W (2013) Modeling and predicting of surface roughness for generating grinding gear. J Mater Process Tech 213(5):717–72110.1016/j.jmatprotec.2012.11.017 ↗
27. Zhou W, Tang J, Shao W (2020) Study on surface generation mechanism and roughness distribution in gear profile grinding. Int J Mech Sci 187:105921. https://doi.org/10.1016/j.ijmecsci.2020.10592110.1016/j.ijmecsci.2020.105921 ↗
28. Yang Y, Wu Y, Tsai T (2022) An analytical method to control and predict grinding textures on modified gear tooth flanks in CNC generating gear grinding. Mech Mach Theory 177:105023. https://doi.org/10.1016/j.mechmachtheory.2022.10502310.1016/j.mechmachtheory.2022.105023 ↗
29. Setti D, Ghosh S, Rao P (2017) A method for prediction of active grits count in surface grinding. Wear 382/383:71–7710.1016/j.wear.2017.04.012 ↗
30. Younis MA, Alawi H (1984) Probabilistic analysis of the surface grinding process. T Can Soc Mech Eng 8(4):208–21310.1139/tcsme-1984-0031 ↗
31. Jiang J, Ge P, Hong J (2013) Study on micro-interacting mechanism modeling in grinding process and ground surface roughness prediction. Int J Adv Manuf Tech 67(5/8):1035–105210.1007/s00170-012-4546-9 ↗
32. Yan Y, Zhang Z, Zhao B et al (2021) Study on prediction of three-dimensional surface roughness of nano-ZrO2 ceramics under two-dimensional ultrasonic-assisted grinding. Int J Adv Manuf Tech 112(9/10):2623–263810.1007/s00170-020-06426-z ↗