A comparison between friction stir welding, linear friction welding and rotary friction welding
Source abstract
Abstract
Three friction welding processes are compared for temperature, stresses and strains, as well as strain rates developed in the early phases of the processes, which are essential in their successful development. These are friction stir welding (FSW), linear friction welding (LFW) and rotary friction welding (RFW). Their common characteristic is the use of friction to generate adequate energy and raise temperature locally in order to create favorable conditions for welding at the interface between two parts. Although the mode of movement is different for each one of them, welds are produced through plastic deformation. The Lagrangian and coupled Eulerian-Lagrangian numerical models developed have produced results which are in qualitative agreement with experiments and have shed a light on the commonalities of these friction welding processes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Electrical Contact Performance and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Vairis A, Christakis N (2007) The development of a continuum framework for friction welding processes with the aid of micro-mechanical parameterisations. Int J of Modelling Identification and Control 2(4):347–35610.1504/IJMIC.2007.016417 ↗
2. Rosenthal D, Schrmerber R (1938) Thermal study of arc welding – experimental verification of theoretical formulas. Welding Research Supplement 17: 2–8
3. Schmidt H, Hattel J, Wert J (2004) An analytical model for the heat generation in friction stir welding. Modelling Simul Mater Sci Eng 12:143–15710.1088/0965-0393/12/1/013 ↗
4. Shi Q, Dickerson T, Shercliff HR (2003) Thermo-mechanical FE modelling of friction stir welding of Al-2024 including tool loads. The 4th International Symposium on Friction Stir Welding, Park City, Utah, USA, 14–16 May 2003
5. Schmidt H, Hattel J (2005) A local model for the thermo-mechanical conditions in friction stir welding. Modelling and Simulation in Mat Science and Eng 13:77–9310.1088/0965-0393/13/1/006 ↗
6. Vairis A, Frost M (2000) Modelling the linear friction welding of titanium blocks. Mater Sci Eng A 292:810.1016/S0921-5093(00)01036-4 ↗
7. Turner RP, Gebelin JC, Ward RM et al (2011) Linear friction welding of Ti-6Al-4V: modelling and validation. Acta Materialia 59(10):3792–380310.1016/j.actamat.2011.02.028 ↗
8. Kavallaris NI, Lacey AA, Nikolopoulos CV et al (2007) Behaviour of a non-local equation modelling linear friction welding. IMA Journal of Applied Mathematics 72:597–61610.1093/imamat/hxm031 ↗
9. Medvedev A, Vairis A, Nikiforov R et al (2012) Energy balance of the linear friction welding process. Journal of Engineering Science and Technology Review 5(3):20–2410.25103/jestr.053.04 ↗
10. Lacey AA, Voong C (2012) Steady-state mathematical models of linear friction welding. Quarterly Journal of Mechanics & Applied Mathematics 65(2):211–23710.1093/qjmam/hbr028 ↗
11. Li W, Vairis A, Preuss M et al (2016) Linear and rotary friction welding review. International Materials Reviews 61(2):71–10010.1080/09506608.2015.1109214 ↗
12. Healy JJ, Mcmullan DJ, Bahrani AS (1976) Analysis of frictional phenomena in friction welding of mild steel. Wear 37:265–27810.1016/0043-1648(76)90033-8 ↗
13. Bendzsak GJ, North TH, Li Z (1997) Numerical model for steady-state flow in friction welding. Acta Materialia 45(4):1735–174510.1016/S1359-6454(96)00280-7 ↗
14. Midling OT, Grong O (1994) A process model for friction welding of Al-Mg-Si alloys and Al-SiC metal matrix composites-I: HAZ temperature and strain rate distribution. Acta Metall Mater 42(5):1595–160910.1016/0956-7151(94)90369-7 ↗
15. Sluzalec A (1990) Thermal effects in friction welding. International Journal of Mechanical Sciences 32(6):467–47810.1016/0020-7403(90)90153-A ↗
16. Alvise LD, Massoni E, Walløe SJ (2002) Finite element modelling of the inertia friction welding process between dissimilar materials. Journal of Materials Processing Technology 125:387–391
17. Papazafeiropoulos G, Tsainis AM (2015) Numerical modeling of the friction stir welding process. The 8th GRACM International Congress on Computational Mechanics, Volos, Greece, 12–15 July
18. Wang FF, Li WY, Li JL et al (2014) Process parameter analysis of inertia friction welding nickel-based superalloy. Int J Adv Manuf Technol 71:1909–191810.1007/s00170-013-5569-6 ↗
19. Johnson GR, Cook WH (1983) A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. Proceedings of the 7th International Symposium on Ballistics, Hague, Netherlands, pp. 541–547