A comprehensive review on residual stresses in turning
Source abstract
Abstract
Residual stresses induced during turning processes can affect the quality and performance of machined products, depending on its direction and magnitude. Residual stresses can be highly detrimental as they can lead to creeping, fatigue, and stress corrosion cracking. The final state of residual stresses in a workpiece depends on its material as well as the cutting-tool configuration such as tool geometry/coating, cooling and wear conditions, and process parameters including the cutting speed, depth-of-cut and feed-rate. However, there have been disagreements in some literatures regarding influences of the above-mentioned factors on residual stresses due to different cutting conditions, tool parameters and workpiece materials used in the specific investigations. This review paper categorizes different methods in experimental, numerical and analytical approaches employed for determining induced residual stresses and their relationships with cutting conditions in a turning process. Discussion is presented for the effects of different cutting conditions and parameters on the final residual stresses state.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced machining processes and optimization · Welding Techniques and Residual Stresses · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Totten GE (2002) Handbook of residual stress and deformation of steel. ASM International
2. Fetullazade E, Akyildiz HK, Saritas S (2010) Effects of the machining conditions on the strain hardening and the residual stresses at the roots of screw threads. Mater Des 31(4):2025–203110.1016/j.matdes.2009.10.023 ↗
3. Huang XD, Zhang XM, Ding H (2016) A novel relaxation-free analytical method for prediction of residual stress induced by mechanical load during orthogonal machining. Int J Mech Sci 115/116:299–30910.1016/j.ijmecsci.2016.06.024 ↗
4. Salman Kh, Elsheikh AH, Ashham M et al (2019) Effect of cutting parameters on surface residual stresses in dry turning of AISI 1035 alloy. J Bra Soc Mech Sci Eng 41(8):349. https://doi.org/10.1007/s40430-019-1846-010.1007/s40430-019-1846-0 ↗
5. Park MK, Sindhu RA, Lee SJ et al (2009) A residual stress evaluation in laser welded lap joint with hole drilling method. Int J Precis Eng Manu 10(5):89–9510.1007/s12541-009-0099-8 ↗
6. Elsheikh AH, Guo J, Bai K et al (2020) Improving clamping accuracy of thin-walled workpiece in turning operation. IOP Conf Ser Mater Sci Eng 751:012080. https://doi.org/10.1088/1757-899X/751/1/01208010.1088/1757-899X/751/1/012080 ↗
7. Al-Huniti NS, AlNimr MA, Da’as MA (2004) Transient variations of thermal stresses and the resulting residual stresses within a thin plate during welding processes. J Thermal Stress 27(8):671–68910.1080/01495730490483850 ↗
8. Bang HS, Park CS, Bang HS (2017) Structural analysis of automotive cowl parts considering welding residual stress. Int J Precis Eng Manu 18:729–73710.1007/s12541-017-0087-3 ↗
9. Xia J, Jin H (2018) Numerical analysis for controlling residual stresses in welding design of dissimilar materials girth joints. Int J Precis Eng Manu 19(1):57–6610.1007/s12541-018-0007-1 ↗
10. Wu Q, Li DP, Zhang YD (2016) Detecting milling deformation in 7075 aluminum alloy aeronautical monolithic components using the quasi-symmetric machining method. Metals 6(4):80. https://doi.org/10.3390/met604008010.3390/met6040080 ↗
11. Javidi A, Rieger U, Eichlseder W (2008) The effect of machining on the surface integrity and fatigue life. Int J Fatigue 30(10/11):2050–205510.1016/j.ijfatigue.2008.01.005 ↗
12. Sticchi M, Schnubel D, Kashaev N et al (2014) Review of residual stress modification techniques for extending the fatigue life of metallic aircraft components. Appl Mech Rev 67(1):010801. https://doi.org/10.1115/1.402816010.1115/1.4028160 ↗
13. Javadi H, Jomaa W, Songmene V et al (2019) Inconel 718 superalloy controlled surface integrity for fatigue applications produced by precision turning. Int J Precis Eng Manu 20:1297–131010.1007/s12541-019-00145-6 ↗
14. Choi Y (2019) Effects of cutting speed on surface integrity and fatigue performance of hard machined surfaces. Int J Precis Eng Manu 20:139–14610.1007/s12541-019-00045-9 ↗
15. Dai W, Li C, He D et al (2019) Mechanism of residual stress and surface roughness of substrate on fatigue behavior of micro-arc oxidation coated AA7075-T6 alloy. Surf Coat Technol 380:125014. https://doi.org/10.1016/j.surfcoat.2019.12501410.1016/j.surfcoat.2019.125014 ↗
16. Masmiati N, Sarhan AAD, Hassan MAN et al (2016) Optimization of cutting conditions for minimum residual stress, cutting force and surface roughness in end milling of S50C medium carbon steel. Measurement 86:253–26510.1016/j.measurement.2016.02.049 ↗
17. Martín V, Vázquez J, Navarro C et al (2020) Effect of shot peening residual stresses and surface roughness on fretting fatigue strength of Al 7075–T651. Tribol Int 142:106004. https://doi.org/10.1016/j.triboint.2019.10600410.1016/j.triboint.2019.106004 ↗
18. Sakai T, Nakagawa A, Oguma N et al (2016) A review on fatigue fracture modes of structural metallic materials in very high cycle regime. Int J Fatig 93:339–35110.1016/j.ijfatigue.2016.05.029 ↗
19. Algarni M, Choi Y, Bai Y (2017) A unified material model for multiaxial ductile fracture and extremely low cycle fatigue of Inconel 718. Int J Fatig 96:162–17710.1016/j.ijfatigue.2016.11.033 ↗
20. Dong Y, Li J, Ren Y et al (2020) Laser-assisted cyclic chipless splitting for hard-to-cut thick wall tubes and fatigue fracture mechanism analysis. Int J Mech Sci 168:105308. https://doi.org/10.1016/j.ijmecsci.2019.10530810.1016/j.ijmecsci.2019.105308 ↗
21. Liu CR, Yang X (2001) The scatter of surface residual stresses produced by face-turning and grinding. Mach Sci Technol 5(1):1–2110.1081/MST-100103175 ↗
22. Nowag L, Sölter J, Brinksmeier E (2007) Influence of turning parameters on distortion of bearing rings. Prod Eng Res Dev 1(2):135–13910.1007/s11740-007-0009-9 ↗
23. Yazdani Nezhad H, O’Dowd NP (2015) Creep relaxation in the presence of residual stress. Eng Fract Mech 138:250–26410.1016/j.engfracmech.2015.03.037 ↗
24. Savaria V, Bridier F, Bocher P (2016) Predicting the effects of material properties gradient and residual stresses on the bending fatigue strength of induction hardened aeronautical gears. Int J Fatigue 85:70–8410.1016/j.ijfatigue.2015.12.004 ↗
25. Ghosh S, Rana VPS, Kain V et al (2011) Role of residual stresses induced by industrial fabrication on stress corrosion cracking susceptibility of austenitic stainless steel. Mater Des 32(7):3823–383110.1016/j.matdes.2011.03.012 ↗
26. Wang Y, Han X, Liu Y et al (2014) Effect of residual stress on corrosion sensitivity of carbon steel studied by SECM. Chem Res Chin Univ 30(6):1022–102710.1007/s40242-014-4099-6 ↗
27. Reed EC, Viens JA (1960) The influence of surface residual stress on fatigue limit of titanium. J Eng Ind 82(1):76–7810.1115/1.3663004 ↗
28. Henriksen EK (1951) Residual stresses in machined surfaces. Trans ASME 73:69–76
29. Zong WJ, Sun T, Li D et al (2006) FEM optimization of tool geometry based on the machined near surface’s residual stresses generated in diamond turning. J Mater Process Technol 180(1/3):271–27810.1016/j.jmatprotec.2006.07.004 ↗
30. Nespor D, Denkena B, Grove T et al (2015) Differences and similarities between the induced residual stresses after ball end milling and orthogonal cutting of Ti-6Al-4V. J Mater Process Technol 226:15–2410.1016/j.jmatprotec.2015.06.033 ↗
31. Alipooramirabad H, Paradowska A, Ghomashchi R et al (2015) Quantification of residual stresses in multi-pass welds using neutron diffraction. J Mater Process Technol 226:40–4910.1016/j.jmatprotec.2015.07.002 ↗
32. Hosseini A, Kishawy HA, Moetakef-Imani B (2016) Effects of broaching operations on the integrity of machined surface. Proc CIRP 45:163–16610.1016/j.procir.2016.02.352 ↗
33. Buj-Corral I, Vivancos-Calvet J, Setien I et al (2017) Residual stresses induced by honing processes on hardened steel cylinders. Int J Adv Manuf Technol 88(5):2321–232910.1007/s00170-016-8870-3 ↗
34. Zhang XX, Wang D, Xiao BL et al (2017) Enhanced multiscale modeling of macroscopic and microscopic residual stresses evolution during multi-thermo-mechanical processes. Mater Des 115:364–37810.1016/j.matdes.2016.11.070 ↗
35. Wang Z, Denlinger E, Michaleris P et al (2017) Residual stress mapping in Inconel 625 fabricated through additive manufacturing: method for neutron diffraction measurements to validate thermomechanical model predictions. Mater Des 113:169–17710.1016/j.matdes.2016.10.003 ↗
36. Devarajan N, Asundi MK, Somasundaram S (1984) Experimental method for predicting residual stresses due to turning in stainless steel. Exp Tech 8(8):22–2610.1111/j.1747-1567.1984.tb01935.x ↗
37. Huang X, Sun J, Li J et al (2013) An experimental investigation of residual stresses in high-speed end milling 7050-T7451 aluminum alloy. Adv Mech Eng 5:592659. https://doi.org/10.1155/2013/59265910.1155/2013/592659 ↗
38. Longhui M, Ning H, Yinfei Y et al (2015) Measurement of surface residual stresses generated by turning thin-wall Ti6Al4V tubes using different cutting parameters. Rare Met Mater Eng 44(10):2381–238610.1016/S1875-5372(16)30025-X ↗
39. Umapathi A, Swaroop S (2019) Measurement of residual stresses in titanium alloys using synchrotron radiation. Measurement 140:518–52510.1016/j.measurement.2019.04.021 ↗
40. Chang KH, Lee CH (2008) Finite element analysis of the residual stresses in T-joint fillet welds made of similar and dissimilar steels. Int J Adv Manuf Technol 41:250. https://doi.org/10.1007/s00170-008-1487-410.1007/s00170-008-1487-4 ↗
41. Li JL, Jing LL, Chen M (2009) An FEM study on residual stresses induced by high-speed end-milling of hardened steel SKD11. J Mater Process Technol 209(9):4515–452010.1016/j.jmatprotec.2008.10.042 ↗
42. Murugan N, Narayanan R (2009) Finite element simulation of residual stresses and their measurement by contour method. Mater Des 30(6):2067–207110.1016/j.matdes.2008.08.041 ↗
43. Salahshoor M, Guo YB (2014) Finite element simulation and experimental validation of residual stresses in high speed dry milling of biodegradable magnesium-calcium alloys. Int J Mech Sci 80:153–15910.1016/j.ijmecsci.2014.01.010 ↗
44. Yang D, Liu Z, Ren X et al (2016) Hybrid modeling with finite element and statistical methods for residual stress prediction in peripheral milling of titanium alloy Ti-6Al-4V. Int J Mech Sci 108/109:29–3810.1016/j.ijmecsci.2016.01.027 ↗
45. Kouadri-Henni A, Seang C, Malard B et al (2017) Residual stresses induced by laser welding process in the case of a dual-phase steel DP600: simulation and experimental approaches. Mater Des 123(5):89–10210.1016/j.matdes.2017.03.022 ↗
46. Dalewski R, Jachimowicz J, Pietrzakowski M (2010) Simulations of residual stresses in resistance spot welding process. J Thermal Stress 33(9):843–85710.1080/01495739.2010.482370 ↗
47. Rocha D’ Oliveira AL, Rego RR, de Faria AR (2019) Residual stresses prediction in machining: hybrid FEM enhanced by assessment of plastic flow. J Mater Process Technol 275:116332. https://doi.org/10.1016/j.jmatprotec.2019.11633210.1016/j.jmatprotec.2019.116332 ↗
48. Wu Q, Wu J, Zhang YD et al (2019) Analysis and homogenization of residual stress in aerospace ring rolling process of 2219 aluminum alloy using thermal stress relief method. Int J Mech Sci 157/158:111–11810.1016/j.ijmecsci.2019.04.040 ↗
49. Franchim AS, Campos VSD, Travessa DN et al (2009) Analytical modelling for residual stresses produced by shot peening. Mater Des 30(5):1556–156010.1016/j.matdes.2008.07.040 ↗
50. Brunel F, Brunel JF, Dufrénoy P et al (2013) Prediction of the initial residual stresses in railway wheels induced by manufacturing. J Thermal Stress 36(1):37–5510.1080/01495739.2012.720542 ↗
51. Elsheikh AH, Guo J, Lee KM (2019) Thermal deflection and thermal stresses in a thin circular plate under an axisymmetric heat source. J Thermal Stress 42(3):361–37310.1080/01495739.2018.1482807 ↗
52. Miguélez MH, Zaera R, Molinari A et al (2009) Residual stresses in orthogonal cutting of metals: the effect of thermomechanical coupling parameters and of friction. J Thermal Stress 32(3):269–28910.1080/01495730802637134 ↗
53. Abdelhamid T, Elsheikh AH, Elazab A et al (2018) Simultaneous reconstruction of the time-dependent Robin coefficient and heat flux in heat conduction problems. Inverse Probl Sci Eng 26(9):1231–124810.1080/17415977.2017.1391243 ↗
54. Arrazola PJ, Kortabarria A, Madariaga A et al (2014) On the machining induced residual stresses in IN718 nickel-based alloy: experiments and predictions with finite element simulation. Simul Model Pract Theory 41:87–10310.1016/j.simpat.2013.11.009 ↗
55. Sherafatnia K, Farrahi GH, Mahmoudi AH et al (2016) Experimental measurement and analytical determination of shot peening residual stresses considering friction and real unloading behavior. Mat Sci Eng A 657:309–32110.1016/j.msea.2016.01.070 ↗
56. Mahmoudi AH, Ghasemi A, Farrahi GH et al (2016) A comprehensive experimental and numerical study on redistribution of residual stresses by shot peening. Mater Des 90:478–48710.1016/j.matdes.2015.10.162 ↗
57. Sebastiani M, Sui T, Korsunsky AM (2017) Residual stress evaluation at the micro- and nano-scale: recent advancements of measurement techniques, validation through modelling, and future challenges. Mater Des 118:204–20610.1016/j.matdes.2017.01.025 ↗
58. Ghasemi AR, Mohammadi MM (2016) Residual stress measurement of fiber metal laminates using incremental hole-drilling technique in consideration of the integral method. Int J Mech Sci 114:246–25610.1016/j.ijmecsci.2016.05.025 ↗
59. Bouffioux C, Pesci R, Boman R et al (2016) Comparison of residual stresses on long rolled profiles measured by X-ray diffraction, ring core and the sectioning methods and simulated by FE method. Thin-Walled Struct 104:126–13410.1016/j.tws.2016.03.017 ↗
60. James MN, Newby M, Doubell P et al (2014) Weld residual stresses near the bimetallic interface in clad RPV steel: a comparison between deep-hole drilling and neutron diffraction data. Nucl Eng Des 274:56–6510.1016/j.nucengdes.2014.03.042 ↗
61. Gadallah R, Tsutsumi S, Hiraoka K et al (2015) Prediction of residual stresses induced by low transformation temperature weld wires and its validation using the contour method. Mar Struct 44:232–25310.1016/j.marstruc.2015.10.002 ↗
62. Sun Y, Luzin V, Daniel WJT et al (2017) Development of the slope cutting method for determining the residual stresses in roll formed products. Measurement 100:26–3510.1016/j.measurement.2016.12.036 ↗
63. Beghini M, Loffredo M, Monelli BD et al (2018) Residual stress measurements in an autofrettaged cylinder through the initial strain distribution method. Int J Press Vessels Pip 168:87–9310.1016/j.ijpvp.2018.09.007 ↗
64. Neubert S, Pittner A, Rethmeier M (2016) Numerical sensitivity analysis of TRIP-parameter K on weld residual stresses for steel S355J2+ N. J Thermal Stress 39(2):201–21910.1080/01495739.2015.1124641 ↗
65. Foadian F, Carradó A, Pirling T et al (2016) Residual stresses evolution in Cu tubes, cold drawn with tilted dies – Neutron diffraction measurements and finite element simulation. Mater Des 107:163–17010.1016/j.matdes.2016.06.028 ↗
66. Lee HH, Gangwar KD, Park KT et al (2017) Neutron diffraction and finite element analysis of the residual stress distribution of copper processed by equal-channel angular pressing. Mater Sci Eng A 682:691–69710.1016/j.msea.2016.11.094 ↗
67. Agrawal S, Joshi SS (2013) Analytical modelling of residual stresses in orthogonal machining of AISI4340 steel. J Manuf Process 15(1):167–17910.1016/j.jmapro.2012.11.004 ↗
68. Barash MM, Schoech WJ (1970) A semi-analytical model of the residual stress zone in orthogonal machining. In: Proceedings of the 11th international machine tool design and research conference, pp 603–613
69. Lazoglu I, Ulutan D, Alaca BE et al (2008) An enhanced analytical model for residual stress prediction in machining. CIRP Ann Manuf Technol 57(1):81–8410.1016/j.cirp.2008.03.060 ↗
70. Ulutan D, Erdem Alaca B, Lazoglu l (2007) Analytical modelling of residual stresses in machining. J Mater Process Technol 183(1):77–8710.1016/j.jmatprotec.2006.09.032 ↗
71. Outeiro JC, Umbrello D, M’Saoubi R (2006) Experimental and numerical modelling of the residual stresses induced in orthogonal cutting of AISI 316L steel. Int J Mach Tools Manuf 46(14):1786–179410.1016/j.ijmachtools.2005.11.013 ↗
72. Jacobus K, DeVor RE, Kapoor SG (1999) Machining-induced residual stress: experimentation and modeling. J Manuf Sci Eng 122(1):20–3110.1115/1.538906 ↗
73. Özel T, Ulutan D (2012) Prediction of machining induced residual stresses in turning of titanium and nickel based alloys with experiments and finite element simulations. CIRP Ann Manuf Technol 61(1):547–55010.1016/j.cirp.2012.03.100 ↗
74. Kundrák J, Mamalis AG, Szabó G et al (2016) Numerical examination of residual stresses developing during hard turning at different rake angles. Int J Adv Manuf Technol 89:1989–199910.1007/s00170-016-9229-5 ↗
75. Liu CR, Guo YB (2000) Finite element analysis of the effect of sequential cuts and tool-chip friction on residual stresses in a machined layer. Int J Mech Sci 42:1069–108610.1016/S0020-7403(99)00042-9 ↗
76. Sharman ARC, Hughes JI, Ridgway K (2015) The effect of tool nose radius on surface integrity and residual stresses when turning Inconel 718TM. J Mater Process Technol 216:123–13210.1016/j.jmatprotec.2014.09.002 ↗
77. Leppert T, Peng RL (2012) Residual stresses in surface layer after dry and MQL turning of AISI 316L steel. Prod Eng Res Dev 6(4):367–37410.1007/s11740-012-0389-3 ↗
78. Berruti T, Lavella M, Gola MM (2009) Residual stresses on Inconel 718 turbine shaft samples after turning. Mach Sci Technol 13(4):543–56010.1080/10910340903451472 ↗
79. Cakir MC, Sik IY (2005) Finite element analysis of cutting tools prior to fracture in hard turning operations. Mater Des 26(2):105–11210.1016/j.matdes.2004.05.018 ↗
80. Dahlman P, Gunnberg F, Jacobson M (2004) The influence of rake angle, cutting feed and cutting depth on residual stresses in hard turning. J Mater Process Technol 147(2):181–18410.1016/j.jmatprotec.2003.12.014 ↗
81. Zhang XP, Gao E, Richard LC (2009) Optimization of process parameter of residual stresses for hard turned surfaces. J Mater Process Technol 209(9):4286–429110.1016/j.jmatprotec.2008.10.011 ↗
82. Warren AW, Guo YB (2009) Characteristics of residual stress profiles in hard turned versus ground surfaces with and without a white layer. ASME 2008 international manufacturing science and engineering conference collocated with the 3rd JSME/ASME international conference on materials and processing, October 7–10, 2008, Evanston, Illinois, USA, pp 387–39610.1115/MSEC_ICMP2008-72230 ↗
83. Liu CR, Mittal S (1996) Single-step superfinish hard machining: feasibility and feasible cutting conditions. Robot Comput Integr Manuf 12(1):15–2710.1016/0736-5845(95)00029-1 ↗
84. Saini S, Ahuja IS, Sharma VS (2012) Residual stresses, surface roughness, and tool wear in hard turning: a comprehensive review. Mater Manuf Process 27(6):583–59810.1080/10426914.2011.585505 ↗
85. Dixit US, Joshi SN, Davim JP (2011) Incorporation of material behavior in modeling of metal forming and machining processes: a review. Mater Des 32(7):3655–367010.1016/j.matdes.2011.03.049 ↗
86. Vomacka P, Walburger H (2000) Residual stresses due to hard-machining—Industrial experiences. Materials Science Form 347/349:592–59710.4028/www.scientific.net/MSF.347-349.592 ↗
87. König W, Berktold A, Koch KF (1993) Turning versus grinding—a comparison of surface integrity aspects and attainable accuracies. CIRP Ann Manuf Technol 42(1):39–4310.1016/S0007-8506(07)62387-7 ↗
88. Gunnberg F, Escursell M, Jacobson M (2006) The influence of cutting parameters on residual stresses and surface topography during hard turning of 18MnCr5 case carburised steel. J Mater Process Technol 174(1/3):82–9010.1016/j.jmatprotec.2005.02.262 ↗
89. Elsheikh AH, Guo J, Huang Y et al (2018) Temperature field sensing of a thin-wall component during machining: numerical and experimental investigations. J Heat Mass Transf 126:935–94510.1016/j.ijheatmasstransfer.2018.06.006 ↗
90. Ravichandran KS (1995) Thermal residual stresses in a functionally graded material system. Mater Sci Eng A 201(1):269–27610.1016/0921-5093(95)09773-2 ↗
91. Withers PJ, Bhadeshia HKDH (2001) Residual stress. Part 2 – nature and origins. Mater Sci Technol 17(4):366–37510.1179/026708301101510087 ↗
92. Wyatt JE, Berry JT (2006) A new technique for the determination of superficial residual stresses associated with machining and other manufacturing processes. J Mater Process Technol 171(1):132–14010.1016/j.jmatprotec.2005.06.067 ↗
93. Navas VG, Gonzalo O, Bengoetxea I (2012) Effect of cutting parameters in the surface residual stresses generated by turning in AISI 4340 steel. Int J Mach Tool Manuf 61:48–5710.1016/j.ijmachtools.2012.05.008 ↗
94. Hosseini SB, Beno T, Klement U et al (2014) Cutting temperatures during hard turning—measurements and effects on white layer formation in AISI 52100. J Mater Process Technol 214(6):1293–130010.1016/j.jmatprotec.2014.01.016 ↗
95. Wei H, Chen Yl YuW et al (2020) Determination of the macroscopic residual stress: modeling and experimental evaluation of texture and local grain-interaction. Mater Charact 169:110609. https://doi.org/10.1016/j.matchar.2020.11060910.1016/j.matchar.2020.110609 ↗
96. Schajer GS, Ruud CO (2013) Overview of residual stresses and their measurement. Practical residual stress measurement methods. Wiley, Hoboken, pp 1–2710.1002/9781118402832 ↗
97. Lu J, James M, Roy AG et al (1996) Handbook of measurement of residual stresses. Fairmont Press, USA
98. Rossini NS, Dassisti M, Benyounis KY et al (2012) Methods of measuring residual stresses in components. Mater Des 35:572–58810.1016/j.matdes.2011.08.022 ↗
99. Shin YC, Oh SJ, Ruud CO (1991) Interrogation of residual stresses of machined surface by an X-ray diffraction technique. In: Ruud CO, Bussière JF, Green RE (eds) Nondestructive characterization of materials IV, Springer, US, Boston, MA, pp 409–41810.1007/978-1-4899-0670-0_50 ↗
100. Martins COD, Strohaecker TR, Rocha AS et al (2005) Application of X-ray diffraction, micromagnetic and hole drilling methods for residual stress determination in a ball bearing steel ring. Exp Mech 45(4):344–35010.1007/BF02428164 ↗