Adhesive Characteristic and Mechanism of Ballastless Track Sealant in Hydrolysis Condition
Source abstract
Abstract
The current evaluation method cannot predict accurately the hydrolysis resistance of sealants applied in ballastless slab track. And the degradation mechanism of sealant in hydrolysis condition has not been researched systemically. In this paper, the hydrolysis resistance of different sealants was researched with the aid of the self-developed direct tensile test method. The Atomic Force Microscope (AFM) was employed to analyze the micro-adhesion force on the surface of sealants, and thereby the correlation between macro-behavior and the micro-mechanism of sealants during hydrolysis was established. Results showed that the characteristics of the interface between sealants and substrates are reduced after hydrolysis, and that sealants with higher soft-segment content have good resistance to hydrolysis. Reduction of the bonding area after hydrolysis is also an important factor in the reduction of the characteristics of the adhesive interface. The micro-adhesion force of soft segments shows a fluctuating reduction tendency, and that of hard segments reduces more significantly during hydrolysis. The micro-adhesion force has good correlation with the maximum tensile force, but a poor correlation with failure displacement. The maximum tensile force is proved to be an optimal evaluation index in determining the hydrolysis resistance of sealants.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Integrity and Reliability Analysis · Engineering Structural Analysis Methods · Material Properties and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Development of a Crack Sealant Adhesion Test (CSADT) specification for hot-poured bituminous sealants10.1520/jte103108 ↗
2. Al-Qadi · 2008
3. Chemical modification of polyurethane for two-component injection molding10.1002/pen.10997 ↗
4. Stress-state-dependence of damage strain rate tensors caused by growth and coalescence of micro-defects10.1016/j.ijplas.2014.04.007 ↗
5. Measurement of adhesion by a blister method10.1002/app.1961.070051401 ↗
6. Recent development in slab track
7. Adhesion mechanism of bituminous crack sealant to aggregate and laboratory test development
8. Development of a pressurized blister test for interface characterization of aggregate highly polymerized bituminous materials10.1061/(asce)mt.1943-5533.0000222 ↗
9. 2017
10. Rheological characterization of asphalt binders treated with bio sealants for pavement preservation10.1139/cjce-2017-0058 ↗
11. Solution properties of polyurethane10.1016/0142-9418(94)90049-3 ↗
12. Effect of process variables on molecular weight and mechanical properties of water-based polyurethane dispersion10.1016/S0927-7757(01)00857-3 ↗
13. Synthesis and characterization of waterborne polyurethane modified by acrylate/nano-ZnO for dyeing of cotton fabrics10.1007/s12221-018-7985-6 ↗
14. Damage evolution in flexible polyurethane foams10.1002/app.1992.070441202 ↗
15. Morphology-based indices and recommended sampling sizes for using image-based methods to quantify degradations of compacted aggregate materials10.1016/j.conbuildmat.2019.116970 ↗
16. Study on the measures to improve the durability of Chinese CRTSⅠSlab track
17. Isocyanurate formation during rigid polyurethane foam assembly: a mechanistic study based on in situ IR and NMR spectroscopy10.1039/C8PY00637G ↗
18. Effects of the asphalt penetration grade and the mineralogical composition on the asphalt-aggregate bond10.1080/10916466.2013.879175 ↗
19. Phase mixing and separation in polyester polyurethane studied by small-angle scattering: a polydisperse hard sphere model analysis10.1016/j.polymer.2018.05.069 ↗
20. Thermoplastic polyurethane hydrolysis stability10.1177/009524437100300103 ↗
21. Quantitative mapping of elastic moduli at the nanoscale in phase separated polyurethanes by AFM10.1016/j.eurpolymj.2010.09.029 ↗
22. An analysis of the 180° peel test for measuring sealant adhesion10.1520/STP16059S ↗
23. Preparation, microstructure and rheological properties of asphalt sealants for bridge expansion joints10.1016/j.conbuildmat.2015.12.017 ↗
24. Preparation and repeated repairability evaluation of sunflower oil-type microencapsulated filling materials10.1166/jnn.2020.17338 ↗
25. Optimum design for expansion joint anti-seepage slab ballastless track on subgrade of frigid district high-speed Railway
26. Decaying rules and mechanism of the adhesive properties of ballastless slab track sealants at low temperature considering environmental factors
27. Test method on adhesive property of joint sealant in supporting layer of ballastless slab track10.1061/(ASCE)MT.1943-5533.0003163 ↗
28. Durability of green polyurethane adhesive bonded aluminum alloy in dry and hydrothermal ageing conditions10.1002/app.41151 ↗
29. Phase separation and mechanical responses of polyurethane nanocomposites10.1016/j.polymer.2006.08.068 ↗