journal article·2019-09-01

Long-term mechanical properties of cellulose fibre-reinforced cement mortar with diatomite

Ceren Ince, Shahram Derogar, Richard James Ball, Abdullah Ekinci, Nabi Yuzer

Advances in Cement Research· Volume 31· Issue 8
Publisher page

Abstract

This paper presents a study investigating the long-term mechanical properties of cellulose fibre-reinforced cement mortars incorporating diatomite as a replacement material for quartz sand. Important properties including mass, compressive and flexural strength, sorptivity, water penetration depth and porosity have been rigorously investigated. Significant findings demonstrated that increasing the replacement level of diatomite resulted in a systematic decrease in the final mass of cellulose fibre-reinforced cement mortars and a dramatic increase in both flexural and compressive strength. In the short term, sorptivity, water penetration depth and porosity were enhanced, whereas the pozzolanicity of diatomite provided long-term strength gain over the 6 month period of study. Microstructural development of mortars, confirmed using scanning electron microscopy, revealed a denser, more compact structure in the diatomite specimens, which was consistent with the physical property measurements. This research supports the development of environmentally friendly diatomite-based mortars for construction.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Assistant Professor, Civil Engineering Program, Middle East Technical University, Northern Cyprus Campus, Kalkanli, Guzelyurt, Turkey (corresponding author: iceren@metu.edu.tr)

Assistant Professor, Department of Civil Engineering, Faculty of Engineering, European University of Lefke, Lefke, Northern Cyprus, Mersin, Turkey

Reader in Materials, Department of Architecture and Civil Engineering, Faculty of Engineering and Design, BRE Centre for Innovative Construction Materials (BRE CICM), University of Bath, Bath, UK

Professor, Construction Materials Division, Department of Civil Engineering, Yildiz Technical University, Esenler-Istanbul, Turkey

References (35)

Show source-provided references
1. Cellulosic fibre reinforced cement-based composites: a review of recent research10.1016/j.conbuildmat.2015.01.035 ↗
2. ASTM · 2009
3. ASTM · 2013
4. ASTM · 2014
5. ASTM · 2015
6. ASTM · 2016
7. BSI · 2009
8. BSI · 2009
9. Microstructure and mechanical properties of gypsum composites reinforced with recycles cellulose pulp10.1590/S1516-14392008000400002 ↗
10. Use of diatomite as partial replacement for Portland cement in cement mortars10.1016/j.conbuildmat.2007.12.008 ↗
11. Effects of metakaolin, silica fume and slag on pore structure, interfacial transition zone and compressive strength of concrete10.1016/j.conbuildmat.2013.02.075 ↗
12. Mechanical and durability properties of high performance concretes containing supplementary cementitious materials10.1016/j.conbuildmat.2009.08.045 ↗
13. Effects of the usage of diatomite and waste marble powder as partial replacement of cement on the mechanical properties of concrete10.1016/j.conbuildmat.2010.07.002 ↗
14. Characterisation of lightweight aggregates produced with clayey diatomite rocks originating from Greece10.1016/j.matchar.2004.05.004 ↗
15. Effect of pozzolans on the performance of fibre-reinforced mortars10.1016/j.cemconcomp.2004.09.010 ↗
17. Relation between density and compressive strength of hardened concrete
18. Factors affecting the water retaining characteristics of lime and cement mortars in the freshly-mixed state10.1617/s11527-010-9645-1 ↗
19. Natural and calcined clayey diatomite as cement replacement materials: microstructure and pore structure study
20. Use of cellulose fibres from hemp core in fibre cement production. Effect of flocculation, retention, drainage and product properties10.1016/j.indcrop.2012.02.017 ↗
21. The influence of diatomite on the strength and microstructure of Portland cement
22. Usage possibilities of diatomite in the concrete production for agricultural buildings10.6000/1927-5129.2015.11.05 ↗
23. Properties and hydration of blended cements with calcareous diatomite10.1016/j.cemconres.2006.05.005 ↗
24. Preparation and durability of a high performance concrete with natural ultra-fine particles
25. Effect of silica fume on mechanical properties of high-strength concrete10.1016/S0958-9465(03)00017-9 ↗
26. A review of recent developments in natural fibre composites and their mechanical performance10.1016/j.compositesa.2015.08.038 ↗
27. Investigation of properties of lightweight concrete with calcined diatomite aggregate10.1007/s12205-014-0637-5 ↗
28. Porous ceramic monoliths based on diatomite10.1016/j.ceramint.2015.04.046 ↗
29. Microstructure and mechanical properties of waste fibre-cement composites10.1016/j.cemconcomp.2004.09.009 ↗
30. Effect of diatomite addition on fresh and hardened properties of mortars investigated through mixture experiments10.1179/1743676110Y.0000000009 ↗
31. Effect of supplementary cementitious materials on the compressive strength and durability of short-term cured concrete10.1016/j.cemconres.2003.08.017 ↗
32. The study of using rice husk ash to produce ultra high performance concrete10.1016/j.conbuildmat.2010.11.046 ↗
33. The effect of silica fume and high-volume Class C fly ash on mechanical properties, chloride penetration and freeze–thaw resistance of self-compacting concrete10.1016/j.conbuildmat.2007.01.002 ↗
34. The use of raw and calcined diatomite in cement production10.1016/j.cemconcomp.2007.08.003 ↗
35. Development of an eco-friendly ultra-high performance concrete (UHPC) with efficient cement and mineral admixtures uses10.1016/j.cemconcomp.2014.09.024 ↗