Aqueous dispersion characteristics of PMN-PT powder prepared by partial oxalate route
Source abstract
Abstract
Aqueous dispersion of PMN-PT powder prepared by partial oxalate process has been studied using ammonium poly(acrylate) dispersant. Parameters such as dispersant concentration and pH to achieve well dispersed suspensions have been determined by measurement of viscosity and gravitational sediment density. Suspension with PMN-PT powder loading in the range of 50 to 58 vol.-% showed very low viscosity in the range of 0·125–0·325 Pa s at a shear rate of 93 s −1 . The suspensions are shear thinning and obey Casson model. PMN-PT powder suspensions of solids loading in the range of 50 to 58 vol.-% showed yield stress in the range of 0·625 to 9·5 Pa respectively. The green body prepared by casting the suspensions in an open mould followed by drying in air showed high density (63·4% TD) and narrow pore size distribution with a median pore size of 0·14 μm.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Injection Molding Process and Properties · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Naval Materials Research Laboratory, Addl. Ambernath, Thane 421 506, India
References (28)
Show source-provided references
1. 10.1111/j.1151-2916.1989.tb05945.x10.1111/j.1151-2916.1989.tb05945.x ↗
2. 10.1111/j.1151-2916.2000.tb01560.x10.1111/j.1151-2916.2000.tb01560.x ↗
3. St. Pierre P. D. S.: in ‘Ceramic fabrication process’, (ed. Kingery W. D.), 45–51; 1963, Cambridge, MA, MIT Press.
4. Richerson D. W. ‘Modern ceramic engineering’, 178–216; 1982, New York, Marcel Dekker.
5. 10.1111/j.1151-2916.2000.tb01432.x10.1111/j.1151-2916.2000.tb01432.x ↗
6. 10.1111/j.1551-2916.2005.00622.x10.1111/j.1551-2916.2005.00622.x ↗
7. Omatete O. O. · Am. Ceram. Soc. Bull. · 1991 · 70 · 1641
8. 10.1111/j.1151-2916.1998.tb02377.x10.1111/j.1151-2916.1998.tb02377.x ↗
9. Takahashi M. · Ceram. Jpn · 1997 · 32 · 102
10. 10.1111/j.1151-2916.1998.tb02377.x10.1111/j.1151-2916.1998.tb02377.x ↗
11. 10.1016/S0272-8842(99)00020-610.1016/S0272-8842(99)00020-6 ↗
12. Balzer B., and Gauckler L. J.: in ‘Handbook of advanced ceramics’, (ed. S. Somiaya et al.), Vol. 1, 453–458; 2003, London, Elsevier Academic Press.
13. 10.1111/j.1551-2916.2007.02122.x10.1111/j.1551-2916.2007.02122.x ↗
14. 10.1111/j.1551-2916.2005.00122.x10.1111/j.1551-2916.2005.00122.x ↗
15. Parfitt G. D. ‘Dispersion of powder in liquids’, 1–47; 1981, NJ, Applied Science.
16. Reed J. S. ‘Principles of ceramic processing’, 150–171; 1995, New York, John Wiley & Sons.
17. 10.1111/j.1151-2916.1990.tb05168.x10.1111/j.1151-2916.1990.tb05168.x ↗
18. 10.1111/j.1151-2916.1994.tb04663.x10.1111/j.1151-2916.1994.tb04663.x ↗
19. 10.1111/j.1151-2916.1988.tb05855.x10.1111/j.1151-2916.1988.tb05855.x ↗
20. 10.1111/j.1151-2916.1988.tb05792.x10.1111/j.1151-2916.1988.tb05792.x ↗
21. 10.1111/j.1151-2916.1998.tb02373.x10.1111/j.1151-2916.1998.tb02373.x ↗
22. 10.1016/S0955-2219(00)00012-110.1016/S0955-2219(00)00012-1 ↗
23. 10.1007/s11051-006-9121-610.1007/s11051-006-9121-6 ↗
24. 10.1016/j.msea.2006.12.05910.1016/j.msea.2006.12.059 ↗
25. 10.1111/j.1551-2916.2007.01787.x10.1111/j.1551-2916.2007.01787.x ↗
26. 10.1177/1045389X920030020110.1177/1045389X9200300201 ↗
27. Uchino K. · IEEE Trans. Ultrason., Ferroelectr. Freq. Control · 1986 · 33 · 806
28. Jayasingh E. M. · Ceram. Int., in press