Compressive strength and biomineralisation improvement by water glass coating on porous calcium phosphate scaffolds

Calcium phosphate (Ca–P) based scaffolds were found to be a favourable alternative for orthopaedic applications because of their similar chemical composition to natural bone. In this study, porous triphasic Ca–P scaffolds containing macropores (∽200 μm) interconnected with micropores (∽20 μm) were fabricated using an extrusion method. The hydroxyapatite/tricalcium phosphate ratio of the porous scaffolds was varied using different ratios of starting materials while keeping the Ca/P ratio fixed (1.5). A water glass coating on the porous Ca–P scaffolds increased the compressive strength by 45% without significantly decreasing the porosity of the H100D50 scaffold. The maximum compressive strength, ∼15 MPa, was achieved on the H100D50 scaffold. The ability for apatite formation in simulated body fluid was amplified by the water glass coating on the sintered Ca–P scaffolds. Therefore, a water glass coating can be used to enhance the mechanical properties as well as the biomineralisation of the porous ceramic scaffolds.