Fabrication of porous ceramic composites with improved compressive strength from coal fly ash

AbstractA freeze–gel casting method has been proposed to fabricate porous mullite–alumina composite with controlled ‘designer’ pore structure and improved compressive strength. In this work, a tertiary butyl alcohol–coal fly ash slurry system with appropriate addition of Al2O3 was used. Unidirectional aligned macropore channels were developed by controlling the solidification direction of the tertiary butyl alcohol solvent. Simultaneously, microsized pores formed in the walls of the pore channels; consequently, the inner section of the walls of the pore channels exhibited a more porous structure than the outer walls. The compressive strength of the sintered porous composite increased as the porosity decreased, i.e. the low porosity gave a high compressive strength. After sintering at 1500°C with 40 wt-% solid loading, the mullite–alumina composite with a porosity of 61·2% exhibited a compressive strength of ∼64·3 MPa.