Reusing coffee waste in manufacture of ceramics for construction
Source abstract
Abstract
This paper aims at studying the influence of different clay/coffee waste mixtures in structural ceramics by incorporating different amounts of spent coffee grounds as an additive. Clay paste with 5, 10, 15 and 20 wt-% of coffee waste was used to mould clay bodies, which were then fired at the temperatures of 900, 1000 and 1100°C. Morphological aspects were evaluated through SEM images, while several laboratory tests provide the physical and mechanical properties. Incorporation of coffee waste increases the water absorption and apparent porosity, and increasing the firing temperature causes an overall decrease in pore size. Samples with up to 10% coffee waste are in the highest grade of mechanical strength standards. The addition of 20% decreases by 70% the thermal conductivity value. The coffee waste residues could be used as a secondary clay raw material to form proper bricks with excellent thermal insulation proprieties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Advanced Cellulose Research Studies · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. 10.1016/j.fuel.2012.10.01910.1016/j.fuel.2012.10.019 ↗
2. 10.1007/s11947-011-0565-z10.1007/s11947-011-0565-z ↗
3. International Trade Centre: ‘The coffee exporter’s guide’, 3rd edn; 2011, Geneva, ITC.
4. 10.3390/molecules1702153510.3390/molecules17021535 ↗
5. 10.1016/j.jcis.2004.08.08310.1016/j.jcis.2004.08.083 ↗
6. 10.1016/j.resconrec.2012.06.00510.1016/j.resconrec.2012.06.005 ↗
7. 10.4236/ojss.2011.1301210.4236/ojss.2011.13012 ↗
8. Soares B. I. G. ‘Valorizacão de Subprodutos industriais por oxipropilação’, PhD thesis, Universidade de Aveiro, Aveiro, Portugal, 2011.
9. 10.1016/S0961-9534(97)10034-410.1016/S0961-9534(97)10034-4 ↗
10. 10.1179/1743676111Y.000000000610.1179/1743676111Y.0000000006 ↗
11. Krakowiak K. J. ‘Assessment of the mechanical microstructure of masonry clay brick by nanoindentation’, PhD thesis, Universidade do Minho, Minho, Portugal, 2011.
12. 10.1016/j.conbuildmat.2011.08.02210.1016/j.conbuildmat.2011.08.022 ↗
13. 10.1016/S0360-1323(03)00140-910.1016/S0360-1323(03)00140-9 ↗
14. 10.4028/www.scientific.net/MSF.514-516.170610.4028/www.scientific.net/MSF.514-516.1706 ↗
15. 10.1016/j.clay.2011.06.00210.1016/j.clay.2011.06.002 ↗
16. 10.1016/j.jeurceramsoc.2004.04.02010.1016/j.jeurceramsoc.2004.04.020 ↗
17. 10.1016/j.clay.2009.10.01310.1016/j.clay.2009.10.013 ↗
18. Galhano P. G. C. ‘Aproveitamento de ‘lamas’ provenientes do corte de rochas ornamentais para a indústria cerâmica’, Proc. VIII Congresso Nacional de Geologia, In e-Terra, Braga, Portugal, July 2010, 4.
19. 10.1016/j.ceramint.2010.10.03210.1016/j.ceramint.2010.10.032 ↗
20. 10.1016/j.clay.2012.09.02210.1016/j.clay.2012.09.022 ↗
21. 10.1016/j.buildenv.2005.05.00410.1016/j.buildenv.2005.05.004 ↗
22. 10.1016/j.ceramint.2004.05.00210.1016/j.ceramint.2004.05.002 ↗
23. 10.1016/j.buildenv.2004.11.02110.1016/j.buildenv.2004.11.021 ↗
24. 10.1016/j.conbuildmat.2011.07.05310.1016/j.conbuildmat.2011.07.053 ↗
25. 10.1016/j.conbuildmat.2011.04.03810.1016/j.conbuildmat.2011.04.038 ↗
26. 10.1016/j.conbuildmat.2012.09.11010.1016/j.conbuildmat.2012.09.110 ↗
27. 10.1016/j.fuproc.2011.11.01310.1016/j.fuproc.2011.11.013 ↗
28. 10.1016/j.ceramint.2009.02.02710.1016/j.ceramint.2009.02.027 ↗
29. Schwarz V. ‘Promoting energy efficiency in buildings: lessons learned from international experience’, United Nations Development Programme, New York, USA, 2009.
30. Laustsen J. ‘Energy efficiency requirements in building codes, energy efficiency policies for new buildings’, International Energy Agency, Paris, France, 2008.
31. Parliament E. (ed.): ‘Directive 2002/91/EC of 16 December 2002 on the energy performance of buildings’, T. E. P. A. O. T. Council, 65, 2003.
32. 10.1016/j.jseaes.2006.04.00310.1016/j.jseaes.2006.04.003 ↗
33. Souza V. P. · Cerâmica · 2008 · 54 · 35110.1590/S0366-69132008000300013 ↗
34. ‘Solos-Determinação dos Limites de consistência’, LNEC, Portugal, 1969.
35. ASTM: ‘Standard test method for water absorption, bulk density, apparent porosity, and apparent specific gravity of fired whiteware products’, ASTM International, West Conshohocken, PA, USA, 1999.
36. EN 1015-18 Methods of test for mortar for masonry – Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar. European Committee for Standardization. Brussels. 2002.
37. Motoki A. · Geociências · 2006 · 25 · 403
38. Bessa-Torcato M. F. · Rev. Geol. · 2007 · 20 · 65
39. 10.1016/j.conbuildmat.2007.04.01610.1016/j.conbuildmat.2007.04.016 ↗
40. ASTM: ‘Standard test method for flexural strength of advanced ceramics at ambient temperature’, C1161-02, ASTM International, West Conshohocken, PA, USA, 2008.
41. ASTM: ‘Standard test methods for sampling and testing brick and structural clay tile’, C67-12, ASTM International, West Conshohocken, PA, USA, 2012.
42. Ribeiro C. C. M. · Cerâm. Ind. · 2004 · 9 · 4
43. Bain J. A. and Highley D. E. ‘Regional appraisal of clay resources - a challenge to the clay mineralogist’, Proc. VI Int. Clay Conf., Oxford, 1978, Developments in Sedimentology, Elsevier Oxford, UK, July 1978, 437–446.10.1016/S0070-4571(08)70741-6 ↗
44. Gippini E. · L'lndustrie Céramique · 1969 · 619 · 423
45. 10.1007/s10973-005-7206-610.1007/s10973-005-7206-6 ↗
46. 10.1007/s12034-008-0156-410.1007/s12034-008-0156-4 ↗
47. 10.1016/S1296-2074(03)00020-710.1016/S1296-2074(03)00020-7 ↗
48. Sena da Fonseca B. ‘Influência do Nevoeiro Salino na Degradação de Materiais Cerâmicos aplicados em Construções’, MSc thesis, U.N.L.F.C.T., Lisbon, Portugal, 2012.
49. 10.1016/S0008-8846(99)00002-210.1016/S0008-8846(99)00002-2 ↗
50. Lubelli B. A. ‘Sodium chloride damage to porous building materials’, PhD thesis, Politecnico di Milano, Milan, Italy, 2006.
51. ‘Technical notes on brick construction’, The Brick Industry Association, Reston, VA, USA, 2007.
52. 10.1016/j.jeurceramsoc.2010.02.00210.1016/j.jeurceramsoc.2010.02.002 ↗
53. 10.1016/j.jeurceramsoc.2010.01.01710.1016/j.jeurceramsoc.2010.01.017 ↗
54. 10.1016/0169-1317(87)90007-X10.1016/0169-1317(87)90007-X ↗
55. ASTM: ‘Standard specification for building brick (solid masonry units made from clay or shale)’, C62-00, ASTM International, West Conshohocken, PA, USA, 2000.
56. ASTM: ‘Standard specification for facing brick (solid masonry units made from clay or shale)’, C216-12a, ASTM International, West Conshohocken, PA, USA, 2012.