journal article·2018Open access

Effects of Different Drying Methods on Bamboo's Physical and Mechanical Properties

Huangfei Lv, Meiling Chen, Xinxin Ma, Jinghao Li, Bo Zhang, Changhua Fang, Benhua Fei

Forest Products Journal· Volume 68· Issue 4

Abstract

Abstract In this work, a comparative study on microwave–vacuum-drying (MVD) and hot-air-drying (HAD) of bamboo culms was conducted. Related physical and mechanical properties of bamboo culms were investigated. MVD results showed no drying defects of bamboo culms. Compared with that of the HAD method, the drying time of MVD was reduced. The shrinkage of both bamboo culm diameter and wall thickness increased with drying time. The crystallinity was changed with drying time between MVD and HAD. The CIELAB color system (L*, a*, b*) was used for analyzing bamboo color changes. All the values of L*, a*, and b* were increased after MVD, which caused the bamboo culms to become golden yellow. However, after HAD, L*, a*, and b* decreased and samples became brown. The mechanical properties of samples were improved after MVD, and did not show any significant changes after HAD. The pore structure after MVD showed higher adsorption capacity, higher specific surface area, and greater volume compared with HAD. Therefore, taking into consideration the dried product quality and short drying time, MVD provides a potential method for drying bamboo.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bamboo properties and applications · Natural Fiber Reinforced Composites · Wood Treatment and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

The authors are, respectively, Postgraduate, Postgraduate, Assistant Researcher, and Associate Researcher, International Centre for Bamboo and Rattan, Key Lab. of Bamboo and Rattan Sci. and Technol. of the State Forestry Admin., Dept. of Bio-materials, Beijing, China (Lv_artemis@163.com, meiling1226@163.com, maxx@icbr.ac.cn, jinghao@icbr.ac.cn); Assistant Researcher, Chinese Academy of Sci., Key Lab. of Bio-based Materials, Qingdao Inst. of Bioenergy and Bioprocess Technol., Qingdao...

References (29)

Show source-provided references
1. Andrés, A., P. Fito, and C. Bilbao. 2004. Drying kinetics of apple cylinders under combined hot air–microwave dehydration. J. Food Eng. 63(1):71–78.
2. Bekhta, P. and P. Niemz. 2003. Effect of high temperature on the change in color, dimensional stability and mechanical properties of spruce wood. Holzforschung57(5):539–546.
3. Fansson, L. and A. L. Antti. 2006. The effect of drying method and temperature level on the hardness of wood. J. Mater. Process Tech. 171(3):467–470.
4. Fu, J., Y. Li, Q. Zhang, S. Shen, X. Y. Du, H. B. Wang, and W. D. Gao. 2016. High-temperature heating and microwave pretreatments: A new light in bamboo's enzymatic hydrolysis. Therm. Sci. 20(3):999–1002.
5. Geoffrey, W. A. 1966. Factors affecting the operation of high-power microwave heating systems for lumber processing. IEEE Trans. Ind. Appl. 2(3):234–243.
6. Gunasekaran, S. 1999. Pulsed microwave-vacuum drying of food materials. Dry. Technol. 17(3):395–412.
7. International Organization for Standardization (ISO). 2008. Colorimetry – Part 4: CIE 1976 L*a*b* colour space. ISO 1164‐4:2008. ISO, Geneva.
8. Jiang, Z. H. 2007. Bamboo and Rattan in the World. China Forestry Publishing House, Beijing.
9. Liese, W. and M. Köhl. 2015. Bamboo: The Plant and Its Uses. Springer, Cham, Switzerland.
10. Lin, T. M., T. D. Durance, and C. H. Scaman. 1998. Characterization of vacuum microwave, air and freeze dried carrot slices. Food Res. Int. 31(2):111–117.
11. Meisam, K. H., A. T. Samaei, and B. Gheshlaghu. 2015. Asymmetric flexural behavior from bamboo's functionally graded hierarchical structure: Underlying mechanisms. Acta Biomater. 16:178–186.
12. Mui, W. W. Y., T. D. Durance, and C. H. Scaman. 2002. Flavor and texture of banana chips dried by combinations of hot air, vacuum, and microwave processing. J. Agric. Food Chem. 50(7):1883–1889.
13. Prasad, B. E. and K. K. Krishna. 2012. Microwave drying of bamboo. Holz Roh- Werkst. 70(1–3):353–355.
14. Segal, L., J. J. Creely, and A. E. Martin. 1959. An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Text. Res. J. 29(10):786–794.
15. Seremet, L., E. Botez, O. V. Nistor, D. G. Andronoiu, and G. D. Mocanu. 2016. Effect of different drying methods on moisture ratio and rehydration of pumpkin slices. Food Chem. 195:104–109.
16. Shupe, T. F., C. Y. Hse, and X. Huang. 2015. Study of moso bamboo's permeability and mechanical properties. Emerg. Mater. Res. 4(1):130–138.
17. Standardization Administration of China (SAC). 1995. Testing methods for physical and mechanical properties of bamboos. SAC GB/T 15780‐1995. SAC, Beijing.
18. Sun, R. H., X. J. Li, Y. Liu. R. G. Hou, and J. Z. Qiao. 2013. Effects of high temperature heat treatment on FTIR and XRD characteristics of bamboo bundles. J. Cent. S. Univ. ForestryTechnol. 33(2):97–100.
19. Sun, W. L. and J. Li. 2010. Analysis and characterization of dimensional stability and crystallinity of heat-treated Larix spp. Sci. Silvae Sinicae46(12):114–118.
20. Sun, Z. B. and L. B. Gu. 2004. Preliminary study on drying properties of Dendrocalamus giganteus. J. Northeast ForestryUniv. 19(2):107–111.
21. Theander, O., J. Bjurman, and J. B. Bouteje. 1993. Increase in the content of low-molecular carbohydrates at lumber surfaces during drying and correlations with nitrogen, yellowing and mould growth. Wood Sci. Technol. 27(5):381–389.
22. Tian, Y., Y. Zhao, J. Huang, H. Zeng, and B. Zheng. 2016. Effects of different drying methods on the product quality and volatile compounds of whole shiitake mushroom. Food Chem. 197(A):714–722.
23. Torgovnikov, G. and P. Vinden. 2009. High-intensity microwave wood modification for increasing permeability. Forest Prod. J. 59(4):84–92.
24. Vetter, R. E., R. A. Sá Ribeiro, M. G. Sá Ribeiro, and I. P. A. Miranda. 2015. Studies on drying of imperial bamboo. Eur. J. Wood Prod. 73:411–414. DOI:10.1007/s00107‐015‐0900‐610.1007/s00107‐015‐0900‐6 ↗
25. Vinden, P., G. Torgovnikov, and J. Hann. 2011. Microwave modification of Radiate pine railway sleepers for preservative treatment. Holz Roh- Werkst. 69(2):271–279.
26. Wang, X., J. Liu, F. Shi, S. Liu, X. Feng, and L. Bao. 2014 a. Influences of heat-treatment on the microstructure and properties of silica–titania composite aerogels. J. Porous Mater. 21(3):293–301.
27. Wang, X. H., B. H. Fei, and J. L. Liu. 2014 b. Effect of vacuum heat treatment temperature on physical and mechanical properties of Eucalyptus pellita wood. Wood Fiber Sci. 46(3):1–8.
28. Yongsawatdigul, J. and S. Gunasekaran. 1996. Microwave-vacuum drying of cranberries: Part I. Energy use and efficiency. J. Food Process. Pres. 20(2):121–143.
29. Zhou, X., P. Wang, Y. Zhang, L. Wang, L. Zhang, and L. Zhang. 2017. Biomass based nitrogen-doped structure-tunable versatile porous carbon materials. J. Mater. Chem. A5(25):12958–12968.