journal article·2021Open access

Yellow Pine Small Clear Flexural Properties across Five Decades

Frederico José Nistal França, Rubin Shmulsky, J. Tedrick Ratcliff, Benjamin Farber, C. Adam Senalik, Robert J. Ross, R. Daniel Seale

Forest Products Journal· Volume 71· Issue 3

Abstract

Abstract When discussing structural southern yellow pine lumber, questions frequently are asked regarding changes over time. This is a significant area of discussion given that structural lumber properties (i.e., design values) were changed around 2012. Climate change, forest management, genetics, processing, and others are listed among the many possible contributing factors. Of interest are these questions: (1) Are changes in bending properties permanent at some fundamental level, or are they somewhat dynamic and responsive to controllable factors? (2) To what degree have the basic southern pine wood mechanical properties changed over time? Related thereto, this research examines the bending properties of small clear pine specimens from three samples. Sample 1 was pulled from a production-weighted sample of in-grade parent lumber. Sample 2 was pulled from commercially available molding and millwork. Sample 3 was pulled from data from the U.S. Department of Agriculture Forestry Products Laboratory from the early to mid-1960s. The flexural properties of small clear specimens among the three samples showed some statistically significant differences. However, there was no clear trend regarding these differences. These results appear to support the notion that while the variability of pine's flexural properties is significant and that while many changes in forest management and production have occurred over the past five decades, the basic density and bending strength of clear southern pine appear generally stable over time.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Forest ecology and management · Wood Treatment and Properties · Tree Root and Stability Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Allen, H. L., Fox, T. R and Campbell.R. G. 2005. What is ahead for intensive pine plantation silviculture in the South?South J. Appl. Forestry29(2): 62– 69.
2. ASTM International. 2017 a. Standard practice for establishing clear wood strength values. ASTM D143. ASTM International, West Conshohocken, Pennsylvania.
3. ASTM International. 2017 b. Standard practice for establishing clear wood strength values. ASTM D2555. ASTM International, West Conshohocken, Pennsylvania.
4. ASTM International. 2019. Standard practice for establishing allowable properties for visually graded dimension lumber from in grade tests of full-size specimens. ASTM D1990. ASTM International, West Conshohocken, Pennsylvania.
5. Doyle, D. V. and Markwardt.L. J. 1966. Properties of southern pine in relation to strength grading of dimension lumber. Research Paper FPL-RP-64. U.S. Department of Agriculture Forest Service, Forest Products Laboratory, Madison, Wisconsin.
6. França, T. S. F. A., França, F. J. N. Seale, R. D. and Shmulsky.R. 2018. Bending strength and stiffness of No. 2 grade southern pine lumber. Wood Fiber Sci. 50(2): 205– 219.
7. Gaby, L. I. 1985. Southern pines: Loblolly pine (Pinus taeda L.), longleaf pine (Pinus palustris Mill.), shortleaf pine (Pinus echinata Mill.), slash pine (Pinus elliottii Engelm). FS-256. U.S. Department of Agriculture Forest Service, Forest Products Laboratory, Madison, Wisconsin. 10pp.
8. Gartner, B. 2005. Assessing wood characteristics and wood quality in intensively managed plantations. J. Forestry2005: 75– 77.
9. Green, D. W., Shelley, B. E. and Vokey.H. P. 1989. In-grade testing of structural lumber. In:Proceedings of a Workshop Sponsored by the In-Grade Testing Committee and Forest Products Society. Proceedings 47363. Forest Products Society, Madison, Wisconsin.110pp.
10. Howard, J. 2007. U.S. timber production, trade, consumption, and price statistics 1965 to 2005. Research Paper FPL-RP-637. U.S. Department of Agriculture Forest Service, Forest Products Laboratory, Madison, Wisconsin. 91pp.
11. Kretschmann, D. E. 2010. Mechanical properties of wood. In:RossR.J.(Ed.).Wood Handbook: Wood as an Engineering Material. Centennial ed. General Technical Report FPL-GTR-190. U.S. Department of Agriculture Forest Service, Forest Products Laboratory, Madison, Wisconsin. pp. 5-1–5-46.
12. Kretschmann, D. E. and Hernandez.R. 2006. Grading timber and glued structural members. In:WalkerJ(Ed.).Primary Wood Processing: Principles and Practice. 2nd ed. Springer, Dordrecht, Netherlands. pp.229– 390.
13. Madsen, B. and Nielsen.L. F. 1992. Structural Behavior of Timber. Timber Engineering Ltd, North Vancouver, British Columbia, Canada.
14. Oswalt, S. N., Smith, W. B. Miles, P. D. and Pugh.S. A. 2019. Forest resources of the United States, 2017. General Technical Report WO-97. U.S. Department of Agriculture Forest Service, Washington, D.C.
15. Ross, R. J. (Ed.). 2010. Wood Handbook: Wood as an Engineering Material. Centennial ed. U.S. General Technical Report FPL-GTR-190.Department of Agriculture Forest Service, Forest Products Laboratory, Madison, Wisconsin.
16. U.S. Census Bureau. 2012. Lumber production and mill stocks: 2010. https://www.census.gov/data/tables/2010/econ/cir/ma321t.html. Accessed March 10, 2020.
17. Wear, D. N. and Greis.J. G. 2002. The southern forest resource assessment: Summary report. General Technical Report SRS-54. U.S. Department of Agriculture Forest Service, Southern Research Station and Southern Region,Asheville, North Carolina. 114pp.