In-situ graphene oxide reduction via inkjet printing using natural reducing inks
Source abstract
Abstract
Abstract The development of eco-friendly alkali lignin-assisted water-based stable graphene oxide (GO) ink presents an innovative approach with the potential to revolutionize the manufacturing of printed and flexible electronics through scalable inkjet printing. However, GO lacks conductivity, necessitating an additional reduction step to restore its electrical properties. Traditional reduction methods using toxic agents or high temperatures are not suitable for large-scale manufacturing due to environmental hazards. In-situ reduction techniques using natural substances offer a promising, cost-effective, and continuous solution for precise reduction of GO-printed patterns via inkjet printing. However, limited research has been conducted on natural-based inkjet printable reducing inks. In this work, in-situ inkjet printable natural reducing inks were produced and printed on top of GO-printed patterns to carry out the reduction process. The reduced printed patterns were investigated for structural, functional groups, morphology, and electrical resistance. The ascorbic acid reduced sample showed an increase in the I D/I G ratio from 1.058 to 1.15, and the interlayer distance decreased from 0.395 to 0.385 nm. The atomic force microscope surface analysis showed a significant increase in the mean roughness by three times for the ascorbic acid-reduced sample, indicating success in the reduction process. The ascorbic acid reduced patterns also showed an electrical conductivity of 1250 S m−1 compared to 0.43 S m−1 for unreduced GO printed patterns, indicating restoration of the sp2 hybridised conductive networks.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Graphene research and applications · Nanomaterials and Printing Technologies · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. The 2021 flexible and printed electronics roadmap10.1088/2058-8585/abf986 ↗
2. Effect of natural surfactant on the performance of reduced graphene oxide conductive ink10.1016/j.jclepro.2022.134254 ↗
3. Wearable and flexible electrodes in nanogenerators for energy harvesting, tactile sensors, and electronic textiles: novel materials, recent advances, and future perspectives10.1016/j.mtsust.2022.100233 ↗
4. Direct printing of surface-embedded stretchable graphene patterns with strong adhesion on viscous substrates10.1016/j.jiec.2022.02.040 ↗
5. Development of conductive inks for electrochemical sensors and biosensors10.1016/j.microc.2021.105998 ↗
6. Recent advances in the development of flexible dye-sensitized solar cells: fabrication, challenges and applications-a review10.1088/2058-8585/acb660 ↗
7. A simple strategy towards highly conductive silver-nanowire inks for screen-printed flexible transparent conductive films and wearable energy-storage devices10.1002/admt.201900196 ↗
8. Inkjet printing metals on flexible materials for plastic and paper electronics10.1039/C7TC04804A ↗
9. Experimental overview for green printed electronics: inks, substrates, and printing techniques10.1088/2058-8585/acd8cc ↗
10. A review on advanced carbon-based thermal interface materials for electronic devices10.1016/j.carbon.2020.06.012 ↗
11. Green strategies to printed sensors for healthcare applications10.1080/15583724.2020.1729180 ↗
12. Synthesis and analysis of flakes graphene oxide10.15251/JOBM.2022.143.107 ↗
13. The influence of substrate functionalization for enhancing the interfacial bonding between graphene oxide and nonwoven polyester10.1007/s12221-021-1386-y ↗
14. An overview of industrial scalable production of graphene oxide and analytical approaches for synthesis and characterization10.1016/j.jmrt.2020.08.050 ↗
15. Drop-on-demand printing of edge-enhanced and conductive graphene twin-lines by coalescence regulation and multi-layers overwriting10.1088/2053-1583/abd2d5 ↗
16. Graphene oxide dispersions in organic solvents10.1021/la801744a ↗
17. Strategies for reduction of graphene oxide—a comprehensive review10.1016/j.cej.2020.127018 ↗
18. Green reduction of graphene oxide using Bacillus sphaericus10.1016/j.jcis.2021.07.102 ↗
19. Experimental review: chemical reduction of graphene oxide (GO) to reduced graphene oxide (rGO) by aqueous chemistry10.1039/C7NR02943H ↗
20. The reduction of graphene oxide10.1016/j.carbon.2011.11.010 ↗
21. Electrical and spectroscopic investigations on the reduction mechanism of graphene oxide10.1016/j.carbon.2012.12.018 ↗
22. Chemical reduction of graphene oxide using green reductants10.1016/j.carbon.2017.04.025 ↗
23. Reduction efficiencies of natural substances for reduced graphene oxide synthesis10.1007/s10853-021-06492-y ↗
24. Textile sensors for wearable applications: a comprehensive review10.1007/s10570-020-03215-5 ↗
25. Inkjet-printed electrochemically reduced graphene oxide microelectrode as a platform for HT-2 mycotoxin immunoenzymatic biosensing10.1016/j.bios.2020.112109 ↗
26. Controlled reduction of graphene oxide laminate and its applications for ultra-wideband microwave absorption10.1016/j.carbon.2019.12.062 ↗
27. Increasing the antioxidant activity of green tea polyphenols in the presence of iron for the reduction of graphene oxide10.1016/j.carbon.2012.02.087 ↗
28. Green preparation of reduced graphene oxide for sensing and energy storage applications10.1038/srep04684 ↗
29. Simultaneous synthesis and patterning of graphene electrodes by reactive inkjet printing10.1016/j.carbon.2013.08.055 ↗
30. In-situ deposition of reduced graphene oxide layers on textile surfaces by the reactive inkjet printing technique and their use in supercapacitor applications10.1016/j.synthmet.2019.116144 ↗
31. Preparation of flexible reduced graphene oxide/poly(vinyl alcohol) film with superior microwave absorption properties10.1039/C5RA16158D ↗
32. Chemical and structural properties of reduced graphene oxide—dependence on the reducing agent10.1007/s10853-020-05461-1 ↗
33. Theoretical simulation of reduction mechanism of graphene oxide in sodium hydroxide solution10.1039/c4cp01031k ↗
34. Epoxide reduction with hydrazine on graphene: a first principles study10.1063/1.3197007 ↗
35. Hydrazine and thermal reduction of graphene oxide: reaction mechanisms, product structures, and reaction design10.1021/jp909284g ↗
36. Reactive inkjet printing10.1039/c2jm30649b ↗
37. Reactive inkjet printing of graphene based flexible circuits and radio frequency antennas10.1039/D1TC02352G ↗
38. Enhanced photocatalytic activity of hierarchical macro/mesoporous TiO2-graphene composites for photodegradation of acetone in air10.1016/j.apcatb.2012.02.035 ↗
39. Annealing a graphene oxide film to produce a free standing high conductive graphene film10.1016/j.carbon.2011.09.022 ↗
40. Stable aqueous dispersions of graphitic nanoplatelets via the reduction of exfoliated graphite oxide in the presence of poly(sodium 4-styrenesulfonate)10.1039/B512799H ↗
41. Effect of extended polymer chains on properties of transparent graphene nanosheets conductive film10.1039/c1jm13790e ↗
42. Ultrafast optical reduction of graphene oxide sheets on colorless polyimide film for wearable chemical sensors10.1038/am.2016.150 ↗
43. Chemical and bio sensing using graphene-enhanced Raman spectroscopy10.3390/nano9040516 ↗
44. Raman spectroscopy of graphene-based materials and its applications in related devices10.1039/c6cs00915h ↗
45. Electrochemically reduced graphene oxide multilayer films as efficient counter electrode for dye-sensitized solar cells10.1038/srep01489 ↗
46. Chemically modified graphene sheets produced by the solvothermal reduction of colloidal dispersions of graphite oxide10.1016/j.carbon.2008.08.013 ↗
47. Laser induced flexible graphene electrodes for electrochemical sensing of hydrazine10.1016/j.matlet.2019.127150 ↗
48. Nonsaturating negative magnetoresistance in laser-induced graphene10.1016/j.matlet.2019.04.002 ↗
49. Reduced graphene oxide promoted assembly of graphene@polyimide film as a flexible cathode for high-performance lithium-ion battery10.1039/D0RA00884B ↗
50. Preparation and characterization of graphene oxide reduced from a mild chemical method
51. Solar light reduced graphene as high energy density supercapacitor and capacitive deionization electrode10.1016/j.electacta.2016.03.111 ↗
52. Through plane networked graphene oxide/polyester hybrid thermal interface material for heat management applications10.1080/15567265.2022.2125857 ↗