Viscous jet printing of RF devices on curved substrates
Source abstract
Abstract
Abstract Viscous jet printing is a novel additive manufacturing technique that utilises high-viscosity inks (with a commensurately higher solid metal content) to create thicker and therefore more conductive layers compared to inkjet printing and related techniques. Viscous jet printing uses inks of 1000 cps and above. It is therefore significantly different from inkjet—which can only use low viscosity inks at usually <15cps. The use of these more viscous inks enables the printed material thicknesses to significantly exceed 20 µ m and so is more similar to thicknesses achieved in screen printing. As a reference, inkjet printed circuits achieve <1 µ m per printed and cured layer This method is therefore advantageous for fabricating radio frequency (RF) circuits and devices on curved surfaces, because ohmic losses are reduced while component performance and efficiency are improved, which is critical for this area. Furthermore, the high viscosity ink allows printing on inclined surfaces without immediately requiring in-situ curing. In this paper, the curing process for the conductive ink was adapted for the 3D printed thermoplastics and the conductivity of the printed layer is characterised and analysed under an electron microscope. A patch antenna arrays and frequency selective surfaces, operating at 6 GHz and 38 GHz respectively, were successfully printed on curved 3D-printed substrates as a demonstrator, showcasing the process’s accuracy using the resulting components’ RF performance. The measured results closely aligned with simulations, validating the efficacy of viscous jet printing for producing RF devices on curved surfaces enabling its use case in applications such as aeronautical, automotive and space industry, where ergonomics is a key factor. To the best of our knowledge, this paper is the first to explore the use of the viscous jet process for manufacturing RF devices on curved substrates.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Microfluidic and Bio-sensing Technologies · Aerosol Filtration and Electrostatic Precipitation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Loughborough University
Printed Electronics Ltd
Funding
UK Engineering and Physical Research Council
References (54)
Show source-provided references
1. Conductive polymer-based electronics in additive manufacturing: materials, processing, and applications10.1155/adv/4234491 ↗
2. “A fully inkjet-printed disposable gas sensor matrix with molecularly imprinted gas-selective materials10.1038/s41528-022-00168-6 ↗
3. 3D-printed disposable wireless sensors with integrated microelectronics for large area environmental monitoring10.1002/admt.201700051 ↗
4. An inkjet-printed microfluidic RFID-enabled platform for wireless lab-on-chip applications10.1109/TMTT.2013.2287478 ↗
5. 3D conformal bandpass millimeter-wave frequency selective surface with improved fields of view10.1038/s41598-021-91218-y ↗
6. The 3D-printed non-radiating edge gap-coupled curved patch antenna10.1109/OJAP.2023.3247173 ↗
7. Hemispheric conformal wide beamwidth circularly polarized antenna based on two pairs of curved orthogonal dipoles in space10.1109/TAP.2021.3076672 ↗
8. 3-D printing of conformal antennas for diversity wrist worn applications10.1109/TCPMT.2018.2874424 ↗
9. Study of a 3D FSS-based printed radome demonstrator for a patch antenna at 3.6 GHz
10. Conformal printing of electrically small antennas on three-dimensional surfaces10.1002/adma.201003734 ↗
11. The 2026 active metamaterials roadmap10.1088/1361-6463/ae11c1 ↗
12. 3D printed digital materials for antenna applications10.23919/SpliTech61897.2024.10612478 ↗
13. State-of-the-art millimeter-wave beam steering antennas for beyond 5G and 6G networks: a comprehensive review10.1109/MAP.2024.3441378 ↗
14. Navigating the road to connectivity: use cases and design considerations for V2X networks using millimeter-wave 5G beam-steering antennas10.1109/MAPCON58678.2023.10464057 ↗
15. Advanced antenna technologies in automotive radar: review and future research directions10.1109/iWAT66946.2026.11501884 ↗
16. Lens-based approach for bespoke contour beam generation with single feed source for satellite applications10.1109/RADIO65825.2025.11296335 ↗
17. Optimal morphing metasurface lens for next generation RF sensing and communications10.23919/EuCAP60739.2024.10501383 ↗
18. Why space? the opportunity for materials science and innovation,” satellite applications catapult
19. Antenna placement and wave propagation for car-to-car communication
20. Well-rounded devices: the fabrication of electronics on curved surfaces—a review10.1039/D1MH00143D ↗
21. 3D conformal curvy electronics: design, fabrication and application10.1021/acsnano.5c03179 ↗
22. Conformal electronics: materials, fabrication, and emerging applications10.1002/flm2.70010 ↗
23. Ink-jetting-based conformal additive manufacturing: advantages, opportunities, and challenges10.1088/2631-7990/ada8e6 ↗
24. 3D printing materials and techniques for antennas and metamaterials: a survey of the latest advances10.1109/MAP.2022.3229298 ↗
25. Inkjet-printed wideband circularly polarized microstrip patch array antenna on a PET film flexible substrate material10.1109/LAWP.2017.2779440 ↗
26. Inkjet-printed wideband antenna on resin-coated paper substrate for curved wireless devices10.1109/LAWP.2015.2425797 ↗
27. Inkjet-printed flexible reconfigurable antenna for conformal WLAN/WiMAX wireless devices10.1109/LAWP.2016.2547338 ↗
28. A dual-polarized 2-D monopulse antenna array for conical conformal applications10.1109/TAP.2021.3060085 ↗
29. A multibeam cylindrically conformal slot array antenna based on a modified rotman lens10.1109/TAP.2018.2829816 ↗
30. Conformal voronoi metasurface antenna embedded in a composite structural laminate10.1109/TAP.2020.3044663 ↗
31. Fully conformal square-patch frequency-selective surface toward wearable electromagnetic shielding10.1109/LAWP.2017.2735196 ↗
32. Wrapping of curved surfaces with conformal broadband metamaterial microwave absorber10.1109/LAWP.2021.3100917 ↗
33. Three-dimensional circuit fabrication using four-dimensional printing and direct ink writing
34. Sandwiched polyethylene shrink film masking with tunable resolution and shape for liquid alloy patterning10.1021/acsapm.8b00010 ↗
35. Diode‐switched thermal‐transfer printed antenna on flexible substrate10.1049/el.2015.3060 ↗
36. Programmable robotized ‘transfer-and-jet’ printing for large, 3D curved electronics on complex surfaces10.1088/2631-7990/ac115a ↗
37. Materials and fractal designs for 3D multifunctional integumentary membranes with capabilities in cardiac electrotherapy10.1002/adma.201405017 ↗
38. Aerosol jet printing for the manufacture of soft robotic devices
39. Silver nanowire inks for direct-write electronic tattoo applications10.1039/C9NR03378E ↗
40. Printed electronics for extreme high temperature environments10.1016/j.addma.2022.102709 ↗
41. Fabrication of design-optimized multifunctional safety cage with conformal circuits for drone using hybrid 3D printing technology10.1007/s00170-022-08831-y ↗
42. Volumetric 3D‐printed antennas, manufactured via selective polymer metallization10.1002/pssr.201800668 ↗
43. 3D printing electronic components and circuits with conductive thermoplastic filament10.1016/j.addma.2017.10.002 ↗
44. Electrically conductive filament for 3D-printed circuits and sensors10.1016/j.apmt.2017.07.001 ↗
45. Conductive ink with circular life cycle for printed electronics10.1002/adma.202202177 ↗
46. 3D SURFACE PRINTER (3DSP)
47. Integrated manufacture of polymer and conductive tracks for real-world applications10.1016/j.addma.2019.06.028 ↗
48. DM-SIP-3100S Datasheet
49. All-inkjet-printed flexible electronics fabrication on a polymer substrate by low-temperature high-resolution selective laser sintering of metal nanoparticles10.1088/0957-4484/18/34/345202 ↗
50. Glass transition of ABS in 3D printing
51. A review on microstrip patch antenna and feeding techniques10.1007/s41870-018-0121-4 ↗
52. Development of the improving process for the 3D printed structure10.1038/srep39852 ↗
53. printing radio-frequency devices onto curved surfaces using viscous paste jet deposition10.26174/thesis.lboro.24681180 ↗
54. RS PRO silver conductive paint paint, 20 g Bottle