journal article·2021-06-01Open access

Polymer-based printed electrolytic capacitor and its circuitry application in a low pass filtering, rectifying and energy storage unit

Chakra Rokaya, Jari Keskinen, Cat Bromels, Philipp Schäffner, Erkan Küzeci, Donald Lupo

Abstract

Abstract We report the fabrication of flexible, printed polymer electrolytic capacitors and their implementation in printed electronics applications such as filtering, rectification and energy harvesting and storage. Capacitors were fabricated by depositing conductive polymer poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate onto porous anodized aluminum foil and yielded specific capacitance of 1 µF cm−2. This is far higher than values reported for printed plate capacitors and opens up the possibility of new applications in printed electronics related to filtering and smoothing at low frequencies. In this work, we have used printed polymer electrolytic capacitors to implement a resistor capacitor first order 1.03 kHz passive low pass filter, a full wave bridge rectifier circuit and a piezo-transducer energy harvester. An integrated full wave bridge rectifier based on these devices shows an efficiency of 80.5% at 1 kHz. When integrated with a vibration-motion based flexible piezoelectric transducer, the devices are able to generate and store about 1 mJ energy, which is a sufficient amount of energy for some low power electronics applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Performance, stability and operation voltage optimization of screen-printed aqueous supercapacitors10.1038/srep46001 ↗
2. Architectural modifications for flexible supercapacitor performance optimization10.1007/s13391-016-6141-y ↗
3. Non-toxic printed supercapacitors operating in sub-zero conditions10.1038/s41598-019-50570-w ↗
4. High rectifier output voltages with printed organic charge pump circuit10.1016/j.orgel.2013.11.024 ↗
5. Modelling the capacitance of d.c. etched aluminum electrolytic capacitor foil10.1023/A:1003527316173 ↗
6. Understanding the capacitance of PEDOT:PSS10.1002/adfm.201700329 ↗
7. Polymer aluminum capacitors: world markets, technologies and opportunities
8. Harvesting energy from the motion of human limbs: the design and analysis of an impact-based piezoelectric generator10.1088/0964-1726/18/3/035001 ↗
9. Motion energy harvesting and storage system including printed piezoelectric film and supercapacitor10.1109/IFETC46817.2019.9073717 ↗
10. Potential environmental and human health impacts of rechargeable lithium batteries in electronic waste10.1021/es400614y ↗
11. Keskinen · 2018
12. Lehtimäki · 2017
13. Hierarchical core–shell Co3O4/graphene hybrid fibers: potential electrodes for supercapacitors10.1007/s10853-017-1971-z ↗
14. Application of a novel binder for activated carbon-based electrical double layer capacitors with nonaqueous electrolytes10.1007/s10008-013-2051-1 ↗
15. Capacitance stability in polymer tantalum capacitors with PEDOT counter electrodes10.1149/2.0031708jss ↗
16. An ultrahigh-rate electrochemical capacitor based on solution-processed highly conductive PEDOT:PSS films for AC line-filtering10.1039/C6EE00615A ↗
17. Micro-supercapacitors based on oriented coordination polymer thin films for AC line-filtering10.1039/C8RA06474A ↗
18. Spectroscopic analysis of composite polymer electrolyte PVA : NH 4 PF 6 : zrO 2 σ 48–51
19. Alternating current line-filter based on electrochemical capacitor utilizing template-patterned graphene10.1038/srep10983 ↗
20. Magnitude Bode Plot analysis of solid polymer electrolyte PMMA complexed with adipic acid
21. Hilbert · 1978
22. Simple RC low pass filter circuit fabricated by unmodified desktop inkjet printer
23. Implementation of AC to DC converter Using Thyristor in ATP10.9790/3021-01110611 ↗
24. A single-diode full-wave rectifier10.1080/00207218508939102 ↗
25. Tayal · 2010
26. Energy harvesting research: the road from single source to multisource10.1002/adma.201707271 ↗
27. Energy harvesting: state-of-the-art10.1016/j.renene.2010.06.014 ↗
28. 2021
29. Route towards sustainable smart sensors: ferroelectric polyvinylidene fluoride-based materials and their integration in flexible electronics10.1039/C8CS00928G ↗
30. Principles and applications of electrochemical capacitors10.1016/S0013-4686(00)00354-6 ↗