The ink-jet printed flexible interdigital capacitors: manufacturing and ageing tests
Source abstract
Abstract
Abstract Correct operation of electronic circuits (including those made with the ink-jet printing technique) requires the electrical parameters of the structures to be constant or to be changeable, but in a predictable way. Due to that, the flexible, ink-jet printed interdigital capacitors (IDSs) were made and then tested in various conditions. We used the conductive silver-based Amepox AX JP-60n ink. As a substrate, we chose the transparent, flexible Melinex OD foil with a thickness of 125 µm. The IDCs were designed and their capacitances were simulated using Comsol Multiphysics Software. Then the test structures were fabricated by the ink-jet printing process using Dimatix DMP 2831 printer. The printed structures were subjected to environmental exposures in a climate chamber to check the influence of temperature and humidity on the tested samples. The IDCs were also subjected to cyclic bending and straightening tests to analyze the outflow of tensile forces on the printed structures, which are exposed to the common factors, that could diminish the quality of the printed and flexible devices. Due to the small capacitance values of the designed and made IDSs, the measurements showed the key importance of the measuring table on which flexible substrates with IDC capacitors were placed for their capacitance value. Performed tests also demonstrated that in most cases, the capacitors are characterized by an increase in capacitance by a few to a dozen or so % after the ageing tests. Obtained results could be a good groundwork for further research, that will include ways of preventing the creation of discontinuities—or minimizing their impact on the printed device performance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Nanomaterials and Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Inkjet-printed wireless chemiresistive sensors-a review10.3390/chemosensors6040066 ↗
2. Inkjet-printed electrochemical sensors10.1016/j.coelec.2017.05.003 ↗
3. Review of recent inkjet-printed capacitive tactile sensors10.3390/s17112593 ↗
4. Ink-jet printed electrodes for determination of sulfur dioxide and ascorbic acid in wine
5. Ink-jet-printed sensors: a useful approach for low cost, rapid prototyping [instrumentation notes]10.1109/MIM.2011.6041380 ↗
6. Ink-jet printed nanoparticle microelectromechanical systems10.1109/84.982863 ↗
7. Mechanical and electro-mechanical properties of EAP actuators with inkjet printed electrodes10.1016/j.synthmet.2018.10.009 ↗
8. Ink-jet delivery of particle suspensions by piezoelectric droplet ejectors10.1063/1.1888026 ↗
9. Ink-jet printing
10. Resistivity study of inkjet-printed structures and electrical interfacing on flexible substrates10.1016/j.mne.2022.100129 ↗
11. Printed electronics for extreme high temperature environments10.1016/j.addma.2022.102709 ↗
12. Inkjet printing on a new flexible ceramic substrate for Internet of Things (IoT) applications10.3390/MI11090841 ↗
13. Ink-jet fabrication of electronic components10.1088/0960-1317/17/5/017 ↗
14. Application of ink jet technology on photovoltaic metallization10.1109/55.9286 ↗
15. Inkjet printing wearable electronic devices10.1039/c7tc00038c ↗
16. Ink-jet printing on paper for the realization of humidity and temperature sensors
17. Inkjet-printed and paper-based electrochemical sensors10.3390/app8020288 ↗
18. All additive inkjet printed humidity sensors on plastic substrate10.1016/j.snb.2012.02.042 ↗
19. Facile method for printing reliable sliver patterns on polymer film10.1016/j.matlet.2021.131551 ↗
20. Inkjet-printed, flexible, high performance, carbon nanomaterial based sensors for ammonia and DMMP gas detection10.1109/EuMC.2015.7345899 ↗
21. Inkjet printing of chemiresistive sensors based on polymer and carbon nanotube networks10.1109/SSD.2012.6198043 ↗
22. Ink-jet printed ring resonator with integrated microfluidic components10.1108/CW-11-2019-0176 ↗
23. Elaboration of a microstructured inkjet-printed carbon electrochemical capacitor10.1016/j.jpowsour.2009.08.085 ↗
24. Monolithic radio frequency SiNx self-rolled-up nanomembrane interdigital capacitor modeling and fabrication10.1088/1361-6528/ab244b ↗
25. Development of anti-oxidation Ag salt paste for large-area Cu-Cu bonding with ultra-high bonding strength10.1016/j.jmst.2021.08.095 ↗
26. Improving mechanical properties and chemical resistance of ink-jet printer color filter by using diblock polymeric dispersants10.1002/polb.20617 ↗
27. Inkjet printing of all aqueous inks to flexible microcapacitors for high-energy storage10.1002/adfm.202301544 ↗
28. Bifunctional flexible electrochromic energy storage devices based on silver nanowire flexible transparent electrodes10.1088/2631-7990/aca638 ↗
29. Ink-jet printed conductive films—geometrical and electrical characterization10.1109/ISSE.2016.7563227 ↗
30. Controlled inkjetting of a conductive pattern of silver nanoparticles based on the coffee-ring effect10.1002/adma.201303278 ↗
31. Structural characterization of inkjet printed capacitor layers in various technological conditions10.1108/SSMT-11-2019-0039 ↗
32. Dependence of electrical resistivity on sintering conditions of silver layers printed by inkjet printing technology10.1108/CW-02-2017-0008 ↗
33. Robust Cu-Au alloy nanowires flexible transparent electrode for asymmetric electrochromic energy storage device10.1016/j.cej.2021.131438 ↗
34. A stable, self-regulating, flexible, ITO-free electrochromic smart window for energy-efficient buildings10.1016/j.xcrp.2022.101193 ↗