journal article·2025-09-01Open access

3D printing by direct ink writing (DIW) of UV-curable elastomers with embedded sensors for soft robotic and flexible electronic applications

Emrah Demirkal, Derrick Banerjee, Rowan Barto, Katarzyna Sabolsky, Konstantinos A Sierros, Edward M Sabolsky

Flexible and Printed Electronics· Volume 10· Issue 3

Abstract

Abstract The study focused on the direct ink writing (DIW) three-dimensional printing and characterization of UV-curable elastomers embedded with strain sensors for soft robotic applications. DIW was chosen due to its ability to precisely deposit multiple composite compositions in order to fabricate complex structures with varied spatial functionality. By leveraging a thiol–ene click chemistry, a range of elastomer compositions were developed using poly(mercaptopropylmethylsiloxane-co-dimethylsiloxane) and vinyl-terminated polydimethylsiloxane with varying molecular weights and photoinitiator concentrations. Rheological analysis demonstrated that photoinitiator concentration directly influenced viscosity, with a controlled range of 10–150 cP being optimal for DIW-based patterning. Upon UV exposure using a 5 W and 365 nm UV source, the elastomers exhibited rapid curing, with viscosity increasing significantly within ∼1 s, demonstrating high polymerization efficiency. A processing map was constructed, revealing the optimized printing speeds and UV source positioning to reduce excessive print spreading, thereby enhancing structural fidelity. Mechanical testing of printed dog-bone specimens printed with the optimal parameters showed a time-dependent increase in elastic modulus and tensile strength over seven days due to prolonged crosslinking. Additionally, silver-filled conductive polymer composites were embedded within the elastomer matrix to create strain sensors, exhibiting linearity (linear sensor output resistance to strain level) and demonstrating a stable cyclic response under 5% strain for 100 cycles. These results suggest that thiol–ene UV-curable silicone elastomers are promising materials for applications in the development of soft structures, particularly in the development of complex smart and multi-functional materials required for soft robotics and flexible electronics.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Additive Manufacturing and 3D Printing Technologies · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Softer is harder: what differentiates soft robotics from hard robotics?10.1557/adv.2018.159 ↗
2. Soft robotics in medical applications10.1142/S2424905X18410064 ↗
3. A review of recent advancements in soft and flexible robots for medical applications10.1002/rcs.2096 ↗
4. Soft actuators for soft robotic applications: a review10.1002/aisy.202000128 ↗
5. Fabrication of a miniature paper-based electroosmotic actuator10.3390/polym8110400 ↗
6. Bodily sketching with sensable stretchables10.1145/2839462.2854122 ↗
7. Flexible and stretchable sensors for fluidic elastomer actuated soft robots10.1557/mrs.2017.4 ↗
8. Negshell casting: 3D-printed structured and sacrificial cores for soft robot fabrication10.1371/journal.pone.0234354 ↗
9. Dimensional capability of selected 3DP technologies10.1108/RPJ-03-2019-0061 ↗
10. A review of multi-material 3D printing of functional materials via vat photopolymerization10.3390/polym14122449 ↗
11. Soft somatosensitive actuators via embedded 3D printing10.1002/adma.201706383 ↗
12. 3D printed linear soft multi-mode actuators expanding robotic applications10.1039/D2SM00050D ↗
13. Direct ink writing advances in multi-material structures for a sustainable future10.1039/D0TA04181E ↗
14. Direct ink writing 3D printing of low-dimensional nanomaterials for micro-supercapacitors10.1039/D4NR01590H ↗
15. Direct Ink writing of 3D functional materials10.1002/adfm.200600434 ↗
16. Direct ink writing 3D printing of polydimethylsiloxane- based soft and composite materials: a mini review10.1093/oxfmat/itac008 ↗
17. Direct ink writing of silicone elastomers to fabricate microfluidic devices and soft robots10.1557/s43579-024-00631-7 ↗
18. Direct ink writing method of fractal wearable flexible sensor based on conductive graphene/polydimethylsiloxane ink10.1007/s12204-023-2687-7 ↗
19. UV-curable, 3D printable and biocompatible silicone elastomers10.1016/j.porgcoat.2019.105372 ↗
20. Multimaterial 3D printing of highly stretchable silicone elastomers10.1021/acsami.9b04873 ↗
21. On the cogent formulation of an elastomeric silicone ink material for direct ink write (DIW) 3D printing10.1002/pen.26703 ↗
22. 3D printing of silicone elastomers for soft actuators10.3390/act11070200 ↗
23. Highly stretchable and UV curable elastomers for digital light processing based 3D printing10.1002/adma.201606000 ↗
24. Highly stable thiol–ene systems: from their structure-property relationship to DLP 3D printing10.1039/C8TC03389G ↗
25. Thiol–ene clickable gelatin: a platform bioink for multiple 3D biofabrication technologies10.1002/adma.201703404 ↗
26. Advantages and drawbacks of Thiol–ene based resins for 3D-printing10.1117/12.2081169 ↗
27. Click chemistry stereolithography for soft robots that self-heal10.1039/C7TB01605K ↗
28. Chemisorption of water on the surface of silicon microparticles measured by dynamic nuclear polarization enhanced NMR10.1021/acs.jpcc.6b11065 ↗
29. Sensitivity enhancement via multiple contacts in the {1H–29Si}–1H cross polarization experiment: a case study of modified silica nanoparticle surfaces10.1039/D0RA04995F ↗
30. The surface of nanoparticle silicon as studied by solid-state NMR10.3390/ma6010018 ↗
31. Determination of methyl ester contents in biodiesel blends by FTIR-ATR and FTNIR spectroscopies10.1016/j.talanta.2006.01.002 ↗
32. Rheological properties of UV-curable ink—influence of the pre-polymer and colorant10.2494/photopolymer.30.703 ↗
33. Rheological measurements of cure rate of UV inks10.1002/app.1986.070310713 ↗
34. 3D printing latex: a route to complex geometries of high molecular weight polymers10.1021/acsami.9b19986 ↗
35. Modular elastomer photoresins for digital light processing additive manufacturing10.1021/acsami.7b13909 ↗
36. On‐demand laser printing of picoliter‐sized, highly viscous, adhesive fluids: beyond inkjet limitations10.1002/admi.201800440 ↗
37. Graphene inks for printed flexible electronics: graphene dispersions, ink formulations, printing techniques and applications10.1016/j.cis.2018.09.003 ↗
38. Thiol–enes: chemistry of the past with promise for the future10.1002/pola.20366 ↗
39. A new class of highly reactive acrylic monomers, 2. Light-induced copolymerization with difunctional oligomers10.1002/macp.1991.021920304 ↗
40. Photo-curing 3D printing robust elastomers with ultralow viscosity resin10.1002/app.49965 ↗
41. Producing critical exponents from gelation for various photoinitiator concentrations; a photo differential scanning calorimetric study10.1016/j.porgcoat.2011.12.007 ↗
42. Modeling thermal and optical effects on photopolymerization systems10.1021/ma034070c ↗
43. Thiol–ene click chemistry10.1002/anie.200903924 ↗
44. Thiol–ene “click” reactions and recent applications in polymer and materials synthesis10.1039/B9PY00216B ↗
45. Silver nanowires with optimized silica coating as versatile plasmonic resonators10.1038/s41598-019-40380-5 ↗
46. Surface-modification of silver nanoparticle-based polydimethylsiloxane composite for fabrication of strain sensor10.1016/j.mtcomm.2023.106486 ↗
47. Ultrastretchable conductive elastomers with a low percolation threshold for printed soft electronics10.1021/acsami.9b11071 ↗
48. Highly stretchable dielectric elastomer composites containing high volume fractions of silver nanoparticles10.1039/C5TA03122B ↗
49. Stretchable electronics based on Ag-PDMS composites10.1038/srep07254 ↗
50. Highly stretchable, anti-corrosive and wearable strain sensors based on the PDMS/CNTs decorated elastomer nanofiber composite10.1016/j.cej.2019.01.014 ↗