Lightweight, ultrathin self-powered real time alcohol detector based on flexible metallized polyimide
Source abstract
Abstract
Abstract The growing popularity of wearable electronics brings significant challenges to battery technology. The capacity of their built-in batteries tends to be limited by the size and weight, along with concerns regarding lifespan, maintenance, and potential health impacts. This paper proposes a flexible alcohol detector that offers the advantages of easy fabrication, wireless operation, cost-efficiency and battery-free. An ultra-thin, flexible self-powered alcohol detector with dimensions of 30 × 30 × 0.05 mm 3 is designed in this paper, exhibiting exceptional bendability and flexibility. The detector implements RF energy harvesting technology to obtain autonomous direct current power, thereby resolving the maintenance challenges and operational limitation associated with external power supplies in existing sensor system. The RF energy harvester (RFEH) efficiently transforms ambient electromagnetic energy at 2.45 GHz ISM band into electric power for device operation. The structural configuration of RFEH consists of a four-gap square ring resonator coupled with two nested square split-ring resonators and a circular split-ring resonator, which is fabricated on a polyimide (PI) substrate by enhanced in-situ metallization and cost-effective printed patterning techniques. Four Schottky barrier diodes integrated at the outermost ring’s gaps enable self-rectification functionality, eliminating the requirement for the complicate rectifying circuit. Moreover, alcohol can modify the dielectric properties of the PI substrate, resulting in a measurable shift of the RFEH’s resonant frequency that directly modulates energy harvesting efficiency. This shift can trigger a real-time alarm with a LED indicator. Notably, the electric power for LED indicator is supplied by RFEH. The range for alcohol concentration detection is of 0%–100% with excellent linearity. A fast response time of 12 s and a recovery time of 17 s can be observed, respectively, along with good mechanical stability under repeated bending cycles. This ultra-thin, flexible self-powered real time alcohol detector shows significant potential for implementation in wearable intoxication prevention system and intelligent food quality monitoring.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Innovative Energy Harvesting Technologies · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. State of the art in alcohol sensing with 2D materials10.1007/s40820-019-0363-0 ↗
2. Polyvinyl alcohol wrapped multiwall carbon nanotube (MWCNTs) network on fabrics for wearable room temperature ethanol sensor10.1016/j.snb.2018.01.152 ↗
3. A wearable biochemical sensor for monitoring alcohol consumption lifestyle through Ethyl glucuronide (EtG) detection in human sweat10.1038/srep23111 ↗
4. Alcohol, psychoactive drugs and fatal road traffic accidents in Norway: a case–control study10.1016/j.aap.2010.12.034 ↗
5. Synthesis of Sm doped SnO2 nanoparticles and their ethanol gas traces detection10.1016/j.ceramint.2021.06.063 ↗
6. Highly improved ethanol gas response of n-type α-Fe2O3 bunched nanowires sensor with high-valence donor-doping10.1016/j.jallcom.2020.154248 ↗
7. Controllable synthesis of crescent-shaped porous NiO nanoplates for conductometric ethanol gas sensors10.1016/j.snb.2019.126642 ↗
8. Graphene nanosheet-grafted double-walled carbon nanotube hybrid nanostructures by two-step chemical vapor deposition and their application for ethanol detection10.1038/s41598-019-44315-y ↗
9. Highly sensitive MWCNTs/SiNWs hybrid nanostructured sensor fabricated on silicon-chip for alcohol vapors detection10.1016/j.physe.2020.114538 ↗
10. Ppbv-level mid-infrared photoacoustic sensor for mouth alcohol test after consuming lychee fruits10.1016/j.pacs.2023.100559 ↗
11. Alcohol vapor sensor based on fluorescent dye-doped optical waveguides10.1109/JSEN.2014.2338916 ↗
12. Design of quasi-shaped spectroscopy based optical sensor for the detection of alcohol10.1016/j.sbsr.2023.100572 ↗
13. Design and experimental study of a CNT sensor for measuring alcohol content with short response delay10.1109/JSEN.2010.2041774 ↗
14. An effective resistive-type alcohol vapor sensor using one-step facile nanoporous anodic alumina10.3390/mi14071330 ↗
15. Carbon nanotubes: functionalisation and their application in chemical sensors10.1039/D0RA09438B ↗
16. Energy replenishment using renewable and traditional energy resources for sustainable wireless sensor networks: a review10.1016/j.rser.2015.02.021 ↗
17. A comprehensive survey on RF energy harvesting: applications and performance determinants10.3390/s22082990 ↗
18. A review on antenna technologies for ambient RF energy harvesting and wireless power transfer: designs, challenges and applications10.1109/ACCESS.2022.3149276 ↗
19. A novel solar and electromagnetic energy harvesting system with a 3-D printed package for energy efficient internet-of-things wireless sensors10.1109/TMTT.2017.2660487 ↗
20. Review of power conversion and energy management for low-power, low-voltage energy harvesting powered wireless sensors10.1109/TPEL.2019.2894465 ↗
21. High-efficient broadband CPW RF rectifier for wireless energy harvesting10.1109/LMWC.2019.2902461 ↗
22. Energy harvesting for wearable devices: a review10.1109/JSEN.2019.2925638 ↗
23. Electronic contact lens: a platform for wireless health monitoring applications10.1002/aisy.201900190 ↗
24. Ambient RF energy harvesting in urban and semi-urban environments10.1109/TMTT.2013.2262687 ↗
25. Energy harvesting in wireless sensor networks: a comprehensive review10.1016/j.rser.2015.11.010 ↗
26. An efficient RF-DC rectifier design for RF energy harvesting systems10.1109/ICECS49266.2020.9294836 ↗
27. Multi-stage rectifier enabled battery-free sensor platform utilizing ambient RF energy10.1109/IMaRC49196.2021.9714653 ↗
28. A 915 MHz far-field energy harvester with −22 dBm sensitivity and 3 V output voltage based on antenna-and- rectifier codesign10.1109/LMWC.2019.2923685 ↗
29. A wearable flexible energy-autonomous filtenna for ethanol detection at 2.45 GHz10.1109/TMTT.2021.3074155 ↗
30. Surface engineering on polyimide-silver films in low-cost, flexible humidity sensors10.1021/acsami.2c00503 ↗
31. Compact rectifiers with ultra-wide input power range based on nonlinear impedance characteristics of Schottky diodes10.1109/TPEL.2020.3046083 ↗
32. Emerging materials and designs for low- and multi-band electromagnetic wave absorbers: the search for dielectric and magnetic synergy?10.1002/adfm.202200123 ↗
33. Polyvinyl-alcohol (PVA)-based RF humidity sensor in microwave frequency10.2528/PIERB13061716 ↗
34. A simple relationship between dielectric constant of mixed solvents with solvent composition and temperature10.1016/j.ijpharm.2003.09.010 ↗
35. Microwave heating improvement: permittivity characterization of water-ethanol and water-NaCl binary mixtures10.3390/en13184861 ↗
36. Capacitive humidity sensor using a polyimide sensing film10.1109/DTIP.2003.1287041 ↗
37. Fe2O3-Co3O4 nanocomposite gas sensor for ethanol sensing studies10.1016/j.ceramint.2024.10.138 ↗
38. CoFe2O4 on mica substrate as flexible ethanol gas sensor in self-heating mode10.1016/j.ceramint.2024.10.138 ↗
39. Novel p-Co3O4/n-SnWO4 heterostructure: room temperature ethanol gas sensor10.1007/s10904-024-03218-w ↗
40. Room temperature printed ethanol sensor based on P-phenylenediamine functionalized graphene oxide10.1109/LSENS.2025.3535770 ↗
41. Wireless antenna sensor with CuO@ Cu-vertical graphene and cysteine-PDMS composite for ethanol gas detection10.1016/j.aca.2024.342969 ↗
42. High-sensitive ethanol gas sensor using Ag modified ZnO nanosheets10.1016/j.talo.2024.100386 ↗
43. Room temperature real air highly sensitive and selective detection of ethanol and ammonia molecules using tin nanoparticle-functionalized graphene sensors10.1021/acsaelm.4c01308 ↗
44. A metasurface for conversion of electromagnetic radiation to DC10.1063/1.4978321 ↗
45. Compact dual-band, wide-angle, polarization- angle -independent rectifying metasurface for ambient energy harvesting and wireless power transfer10.1109/TMTT.2020.3040962 ↗
46. A multi-frequency and multi-mode metasurface energy harvester for RF energy harvesting10.1088/1361-665X/acf424 ↗
47. A flexible compact rectenna for 2.40 Hz ISM energy harvesting applications
48. Design and fabrication of a 2D-isotropic flexible ultra-thin metasurface for ambient electromagnetic energy harvesting10.1063/1.5083876 ↗
49. Thin flexible RF energy harvesting rectenna surface with a large effective aperture for sub μW cm−2 powering of wireless sensor nodes10.1109/TMTT.2022.3192532 ↗
50. A novel ultra-lightweight multiband rectenna on paper for RF energy harvesting in the next generation LTE bands10.1109/TMTT.2017.2721399 ↗
51. Design and safety considerations of an implantable rectenna for far-field wireless power transfer10.1109/TAP.2014.2352363 ↗
52. A high-efficiency self-powered wireless sensor network driven by ambient RF energy far-field10.1109/TIM.2025.3552865 ↗
53. Complete design of energy harvesting system for multiband operation
54. RF energy harvesting for safe monitoring of rail condition on autonomous trains10.1109/TVT.2025.3554539 ↗
55. Self-powered cattle behavior monitoring system using 915 MHz radio frequency energy harvesting10.1109/ACCESS.2024.3360852 ↗