journal article·2023-03-01Open access

Low specific absorption rate quad-port multiple-input-multiple-output limber antenna integrated with flexible frequency selective surface for WBAN applications

Thennarasi Govindan, Sandeep Kumar Palaniswamy, Malathi Kanagasabai, Sachin Kumar, Mohammed Gulam Nabi Alsath

Abstract

Abstract This paper presents the design and analysis of a multiple-input-multiple-output (MIMO) textile antenna for wireless body area network (WBAN) applications. The MIMO antenna is comprised of four identical modified rhombus-shaped monopole antenna elements of size of 0.57{λ}0×0.57{λ}0×0.015{λ}0, where {λ}0 is the wavelength calculated at the lowest operating frequency. The antenna is backed by a 6 ×6 frequency selective surface (FSS) of dimensions of 0.84{λ}0×0.84{λ}0×0.015{λ}0 to improve gain and to reduce specific absorption rate (SAR). The antenna has an impedance bandwidth (S 11 ⩽ −10 dB) of 8.8 GHz (2.8–11.6 GHz) and isolation of >19 dB between the resonating elements. In order to assess the MIMO antenna’s flexibility, the bending analysis is performed for various bending radii. The obtained diversity metrics are: envelope correlation coefficient <0.5 dB, diversity gain <10 dB, channel capacity loss <0.4 bits s−1 Hz−1, and total active reflection coefficient <−10 dB. The performance of the antenna with and without FSS is investigated for gain enhancement and SAR reduction. With the help of FSS, the antenna gain is increased to 8.44 dBi, and the SAR reduced from 6.99 Watt kg−1 to 0.0273 Watt kg−1. The FSS achieves the highest efficiency of 96%. The designed antenna is suitable for smart textile applications due to its low SAR, high gain, and wider impedance bandwidth.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Antenna Design and Analysis · Advanced Antenna and Metasurface Technologies · Energy Harvesting in Wireless Networks

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Design and performance analysis of low SAR hexagonal slot antenna using cotton substrate10.1007/s00542-018-4109-6 ↗
2. A Q-slot monopole for UWB body-centric wireless communications10.1109/TAP.2017.2740977 ↗
3. Wideband circularly polarized textile MIMO antenna for wearable applications10.1109/ACCESS.2021.3101441 ↗
4. Easily extendable compact planar UWB MIMO antenna array10.1109/LAWP.2017.2717496 ↗
5. Dual circularly polarized planar four-port MIMO antenna with wide axial-ratio bandwidth10.3390/s20195610 ↗
6. A novel metamaterial electromagnetic band gap (MM-EBG) isolator to reduce mutual coupling in low-profile MIMO antenna10.1007/s11664-021-09310-y ↗
7. Isolation enhancement in closely coupled dual-band MIMO patch antennas10.1109/LAWP.2019.2928230 ↗
8. Isolation enhancement of wideband vehicular antenna array using fractal decoupling structure10.1109/LAWP.2019.2930365 ↗
9. Mutual coupling reduction for UWB MIMO antennas with a wideband neutralization line10.1109/LAWP.2015.2435992 ↗
10. Isolation enhancement in dual-band monopole antenna for 5G applications10.1109/TCSII.2020.3040164 ↗
11. Miniaturization of electromagnetic bandgap (EBG) structures with high-permeability magnetic metal sheet
12. Mutual coupling reduction between patch antennas using meander line10.1155/2018/2586382 ↗
13. Design of a textile antenna with artificial magnetic conductor for wearable applications10.1002/mop.31158 ↗
14. A compact triple band EBG using interdigital coplanar waveguide structure for antenna gain enhancement10.1155/2020/2856807 ↗
15. Design and SAR analysis of a dual band wearable antenna for WLAN applications10.3390/app12189218 ↗
16. Extremely compact EBG-backed antenna for smartwatch applications in medical body area network10.1049/iet-map.2018.6021 ↗
17. Reduction of specific absorption rate (SAR) in the human head with ferrite material and metamaterial10.2528/PIERC09062303 ↗
18. A novel SAR reduction technique for implantable antenna using conformal absorber metasurface10.3389/fmedt.2022.924433 ↗
19. Enhancing gain for UWB antennas using FSS: a systematic review10.3390/math9243301 ↗
20. Metamaterial integrated folded dipole antenna with low SAR for 4G, 5G and NB-IoT applications10.3390/electronics10212612 ↗
21. Transmission line modelling of metamaterial for different fractional band width10.1016/j.matpr.2020.09.772 ↗
22. Nassr · J. Phys.: Conf. Ser. · 2020 · 150210.1088/1742-6596/1502/1/012030 ↗
23. Janakiram · J. Phys.: Conf. Ser. · 2021 · 196410.1088/1742-6596/1964/6/062019 ↗
24. Novel approach for enhanced reduction of SAR in a mobile phone antenna using high impedance FSS
25. A multi-layered dual-band on-body conformal integrated antenna for WBAN communication10.1016/j.aeue.2018.08.021 ↗
26. Frequency selective surfaces: a review10.3390/app8091689 ↗
27. An overview of three-dimensional frequency-selective structures10.1109/MAP.2014.6867682 ↗
28. Design of a single-layer frequency selective surface for 5G shielding10.1109/LMWC.2021.3053286 ↗
29. Paper-based uniplanar ultra-wideband frequency-selective surface design10.1049/el.2018.7804 ↗
30. A novel miniaturised polarisation independent frequency selective surface with UWB response10.13164/re.2018.1012 ↗
31. FSS and meta-material based low mutual coupling MIMO antenna array10.1109/APUSNCURSINRSM.2019.8888621 ↗
32. Compact size and high gain of CPW-fed UWB strawberry artistic shaped printed monopole antennas using FSS single layer reflector10.1109/ACCESS.2020.2995069 ↗
33. Azemi · J. Phys.: Conf. Ser. · 2021 · 196210.1088/1742-6596/1962/1/012052 ↗
34. Multiband FSS with fractal characteristic based on Jerusalem cross geometry10.1590/2179-10742017v16i4984 ↗
35. Design of FSS absorber with honeycomb substrate based on combination of equivalent circuit model and effective electromagnetic parameters
36. Highly efficient wearable CPW antenna enabled by EBG-FSS structure for medical body area network applications10.1109/ACCESS.2018.2883379 ↗
37. A wearable button antenna with FSS superstrate for WLAN health care applications
38. Design and study of an mmwave wearable textile based compact antenna for healthcare applications10.1155/2021/6506128 ↗
39. Parametric study of Sinc shaped monopole antenna for wireless devices
40. Current misuses and future prospects for printed multiple-input, multiple-output antenna systems [wireless corner]10.1109/MAP.2017.2658346 ↗
41. A comprehensive review of metamaterials/meta surface-based MIMO antenna array for 5G millimeter-wave applications10.1007/s10948-022-06408-0 ↗
42. High-isolation UWB MIMO antenna with multiple X-shaped stubs loaded between ground planes10.1155/2021/1155471 ↗
43. A multi-slotted 2-element quadband MIMO antenna for 4G and 5G applications10.1080/09205071.2021.1934565 ↗
44. Four element MIMO antenna systems with decoupling lines for high-speed 5G wireless data communication10.1155/2022/9078929 ↗
45. Ultra-wideband diversity MIMO antenna system for future mobile handsets10.3390/s20082371 ↗
46. Reduced specific absorption rate compact flexible monopole antenna system for smart wearable wireless communications10.1016/j.jestch.2020.12.012 ↗
47. A wideband frequency tunable FSS for electromagnetic shielding10.1109/TEMC.2017.2702572 ↗
48. RFID-band integrated UWB MIMO antenna for wearable applications
49. Flexible and transparent circularly polarized patch antenna for reliable unobtrusive wearable wireless communications10.3390/s22031276 ↗
50. Gabriel · 1996
51. High gain CPW-fed UWB planar monopole antenna-based compact uniplanar frequency selective surface for microwave imaging10.1002/mmce.21757 ↗
52. A compact umbrella-shaped UWB antenna with gain augmentation using frequency selective surface
53. Interdigital coupled compact FSS reflector for UWB antenna gain enhancement res Sq
54. Modified dual-band wearable antenna using AMC for WLAN applications
55. AMC integrated multilayer wearable antenna for multiband WBAN applications10.32604/cmc.2022.023008 ↗
56. Design and analysis of on‐body wearable antenna with AMC backing for ISM band applications
57. Control of gain and SAR for wearable antenna using AMC structure
58. A dual-band, miniaturized, AMC-based wearable antenna for health monitoring applications10.2528/PIERC21032202 ↗
59. Windmill-shaped antenna with artificial magnetic conductor-backed structure for wearable medical applications10.1002/jnm.2757 ↗
60. Dual-band EBG integrated monopole antenna deploying fractal geometry for wearable applications10.1109/LAWP.2014.2360710 ↗