In-flight imaging of aerosol jet printer droplets to enable spatially resolved flow rate measurements
Source abstract
Abstract
Abstract The effect of process drift in aerosol jet (AJ) printing has been a hindering factor in its large-scale adoption in printed electronics. In this study, we developed an in situ droplet imaging system using a double-pulse laser to quantify the distribution and velocity of sparse droplets between the AJ printer nozzle and the substrate. The droplet velocity and distribution were then used to evaluate a spatially resolved droplet flow rate that was capable of detecting and quantifying process drift over time. Using the droplet imaging system, the effect of different focus ratios was analyzed. The droplet flow rate was shown to be indicative of the deposited line morphology for low to moderate focus ratios. At a high focus ratio, the tool was able to identify non-idealities in the fluid properties which are explained in a detailed analysis. AJ printing demonstrates significant promise for the additive manufacturing of electronics, and this work represents a step toward non-invasive, in-flight monitoring in real time.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Particle Dynamics in Fluid Flows · Electrohydrodynamics and Fluid Dynamics · Laser-induced spectroscopy and plasma
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. All-printed large-scale integrated circuits based on organic electrochemical transistors10.1038/s41467-019-13079-4 ↗
2. Aerosol jet printing for the manufacture of soft robotic devices10.1109/Robosoft.2019.8722766 ↗
3. Printed electronic sensor array for mapping tire tread thickness profiles10.1109/JSEN.2019.2918061 ↗
4. A 2019 Gravure-printed organic TFT technology for active-matrix addressing applications10.1109/LED.2019.2938852 ↗
5. Large-area compliant tactile sensors using printed carbon nanotube active-matrix backplanes10.1002/adma.201404850 ↗
6. Fully screen-printed, large-area, and flexible active-matrix electrochromic displays using carbon nanotube thin-film transistors10.1021/acsnano.6b05368 ↗
7. Coombs · 2000
8. Synthesized biocompatible and conductive ink for 3D printing of flexible electronics10.1016/j.jmbbm.2020.103960 ↗
9. Suitability of paper-based substrates for printed electronics10.3390/ma15030957 ↗
10. Inkjet printing for flexible and wearable electronics10.1063/5.0031669 ↗
11. Low-cost inkjet printing technology for the rapid prototyping of transducers10.3390/S17040748 ↗
12. Flexible, print-in-place 1D-–2D thin-film transistors using aerosol Jet printing10.1021/acsnano.9b04337 ↗
13. Aerosol-jet printing of polymer-sorted (6,5) carbon nanotubes for field-effect transistors with high reproducibility10.1002/aelm.201700080 ↗
14. Aerosol jet printed strain sensor: simulation studies analyzing the effect of dimension and design on performance (September 2018)10.1109/ACCESS.2018.2876647 ↗
15. Fabrication of organic light emitting display using inkjet printing technology10.1109/Isot.2009.5326101 ↗
16. Inkjet-printed flexible RFID antenna for UHF RFID transponders10.1515/msp-2016-0097 ↗
17. Mist flow visualization for round jets in Aerosol Jet® printing10.1080/02786826.2018.1532566 ↗
18. Computational fluid dynamics modeling and online monitoring of aerosol jet printing process10.1115/1.4034591 ↗
19. Aerosol jet printing of biological inks by ultrasonic delivery10.1088/1758-5090/ab5cf5 ↗
20. Printed strain gauge on 3D and low-melting point plastic surface by aerosol jet printing and photonic curing10.3390/s19194220 ↗
21. A review on aerosol-based direct-write and its applications for microelectronics10.1155/2012/324380 ↗
22. Ultrasonic atomization of liquids10.1121/1.1909020 ↗
23. Understanding and mitigating process drift in aerosol jet printing10.1088/2058-8585/ab6e74 ↗
24. Image-based closed-loop control of aerosol jet printing using classical control methods10.1115/1.4043659 ↗
25. Real-time optical process monitoring for structure and property control of aerosol jet printed functional materials10.1002/admt.202000781 ↗
26. Automated inkjet print head sustainability testing10.2352/ISSN.2169-4451.2010.26.1.art00067_2 ↗
27. Principles of aerosol jet printing10.1088/2058-8585/aace28 ↗
28. Analytical investigation of Aerosol Jet printing10.1080/02786826.2014.940439 ↗
29. Controlling and assessing the quality of aerosol jet printed features for large area and flexible electronics10.1088/2058-8585/aa5af9 ↗
30. The effect of droplet sizes on overspray in aerosol-jet printing10.1002/adem.201701084 ↗
31. Ultrasound assisted preparation of emulsion of coconut oil in water: understanding the effect of operating parameters and comparison of reactor designs10.1016/j.cep.2014.12.006 ↗
32. Numerical and experimental investigation of aerosol jet printing10.1016/j.addma.2022.103090 ↗
33. Definitive equations for the fluid resistance of spheres10.1088/0959-5309/57/4/301 ↗
34. Droplet-wall collisions: experimental studies of the deformation and breakup process10.1016/0301-9322(94)00069-V ↗