Ignition and Flame Spreading Features of Excessively Overloaded Polyvinyl Chloride Copper Wires
Source abstract
Abstract
This work investigated the ignition and flame spreading features over an excessively overloaded wire coated with polyvinyl chloride (PVC) to provide valuable information for determining fire behavior caused by this typical type of wire failure. The wires with a core/wire diameter of 3.3/4.1 mm carried various overload currents from 130 A to 240 A at intervals of 10 A. Experimental results revealed that occurrence of a parting arc as the core melted into two parts was indispensable for ignition of the overloaded PVC wire without an external ignition source. The current increase reduced the time for energizing the wire to a parting arc. For this special piloted flame, with the current increase, the intensity of the heating of the core became higher; thus, the flame spread distance (FSD) became longer due to the thermal decomposition of the PVC insulation intensifying, and the average flame spread rate reached its maximum value of approximately 1.0 m/s as the current increased to 220 A. However, the FSD declined as the currents reached higher than 220 A because the faulting wire melted so quickly that it did not have enough time for the insulation materials to decompose and produce sufficient flammable gases.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire dynamics and safety research · Combustion and Detonation Processes · Flame retardant materials and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Babrauskas V (2021) Electrical fires and explosions. Fire Science Publishers, New York
2. Fire Rescue Bureau (2020) National fire and alarm situation in 2020. https://www.119.gov.cn/article/41kpo4CAQyv
3. Morgan J (2016) SFPE handbook of fire protection engineering, 5th edn. Springer, New York
4. Babrauskas V (2001) How do electrical wiring faults lead to structure ignitions. In: Proceedings of the fire and materials 2001 conference. Interscience Communications Ltd, London, pp 39–51
5. National Fire Protection Association (2020) NFPA 921: guide for fire and explosion investigations 2021 edition. National Fire Protection Association, Quincy
6. Babrauskas V (2008) Research on electrical fires: the state of the art. Fire Saf Sci 9:3–18. https://doi.org/10.3801/IAFSS.FSS.9-310.3801/IAFSS.FSS.9-3 ↗
7. Wang Z, Xie T, Ning X, Liu Y, Wang J (2019) Thermal degradation kinetics study of polyvinyl chloride (PVC) sheath for new and aged cables. Waste Manag 99:146–153. https://doi.org/10.1016/j.wasman.2019.08.04210.1016/j.wasman.2019.08.042 ↗
8. Wang C, Liu H, Zhang J, Yang S, Zhang Z, Zhao W (2018) Thermal degradation of flame-retarded high-voltage cable sheath and insulation via TG-FTIR. J Anal Appl Pyrol 134:167–175. https://doi.org/10.1016/j.jaap.2018.06.00510.1016/j.jaap.2018.06.005 ↗
9. Kang MS, Park J, Chung SH, Yoo CS (2022) Effect of the thickness of polyethylene insulation on flame spread over electrical wire with Cu-core under AC electric fields. Combust Flame 240:112017. https://doi.org/10.1016/j.combustflame.2022.11201710.1016/j.combustflame.2022.112017 ↗
10. Park SH, Kang MS, Cha MS, Park J, Chung SH (2019) Flame spread over twin electrical wires with applied DC electric fields. Combust Flame 210:350–359. https://doi.org/10.1016/j.combustflame.2019.09.00310.1016/j.combustflame.2019.09.003 ↗
11. Nagachi M, Mitsui F, Citerne JM, Dutilleul H, Guibaud A, Jomaas G, Legros G, Hashimoto N, Fujita O (2019) Can a spreading flame over electric wire insulation in concurrent flow achieve steady propagation in microgravity? Proc Combust Inst 37:4155–4162. https://doi.org/10.1016/j.proci.2018.05.00710.1016/j.proci.2018.05.007 ↗
12. Fujita O, Kyono T, Kido Y, Ito H, Nakamura Y (2011) Ignition of electrical wire insulation with short-term excess electric current in microgravity. Proc Combust Inst 33:2617–2623. https://doi.org/10.1016/j.proci.2010.06.12310.1016/j.proci.2010.06.123 ↗
13. Takano Y, Fujita O, Shigeta N, Nakamura Y, Ito H (2013) Ignition limits of short-term overloaded electric wires in microgravity. Proc Combust Inst 34:2665–2673. https://doi.org/10.1016/j.proci.2012.06.06410.1016/j.proci.2012.06.064 ↗
14. Shimizu K, Kikuchi M, Hashimoto N, Fujita O (2017) A numerical and experimental study of the ignition of insulated electric wire with long-term excess current supply under microgravity. Proc Combust Inst 36:3063–3071. https://doi.org/10.1016/j.proci.2016.06.13410.1016/j.proci.2016.06.134 ↗
15. Wang K, Wang B, Kong W, Liu F (2014) Study on the pre-ignition temperature variations of wire insulation under overload conditions in microgravity by the functional simulation method. J Fire Sci 32:257–280. https://doi.org/10.1177/073490411351194710.1177/0734904113511947 ↗
16. Gagnon L, Fernandez-Pello C, Urban JL, Carey VP, Konno Y, Fujita O (2021) Effect of reduced ambient pressures and opposed airflows on the flame spread and dripping of LDPE insulated copper wires. Fire Saf J 120:103171. https://doi.org/10.1016/j.firesaf.2020.10317110.1016/j.firesaf.2020.103171 ↗
17. Hu L, Zhu K, Lu Y, Zhang X (2019) An experimental study on flame spread over electrical wire with high conductivity copper core and controlling heat transfer mechanism under sub-atmospheric pressures. Int J Therm Sci 141:141–149. https://doi.org/10.1016/j.ijthermalsci.2019.03.03010.1016/j.ijthermalsci.2019.03.030 ↗
18. Zhao Y, Chen J, Chen X, Lu S (2017) Pressure effect on flame spread over polyethylene-insulated copper core wire. Appl Therm Eng 123:1042–1049. https://doi.org/10.1016/j.applthermaleng.2017.05.13810.1016/j.applthermaleng.2017.05.138 ↗
19. Nakamura Y, Yoshimura N, Ito H, Azumaya K, Fujita O (2009) Flame spread over electric wire in sub-atmospheric pressure. Proc Combust Inst 32:2559–2566. https://doi.org/10.1016/j.proci.2008.06.14610.1016/j.proci.2008.06.146 ↗
20. Lu Y, Huang XY, Hu LH, Fernandez-Pello C (2019) The interaction between fuel inclination and horizontal wind: experimental study using thin wire. Proc Combust Inst 37:3809–3816. https://doi.org/10.1016/j.proci.2018.05.13110.1016/j.proci.2018.05.131 ↗
21. Jia SY, Hu LH, Ma YX, Zhang XL, Fujita O (2022) Experimental study of downward flame spread and extinction over inclined electrical wire under horizontal wind. Combust Flame 237:111820. https://doi.org/10.1016/j.combustflame.2021.11182010.1016/j.combustflame.2021.111820 ↗
22. Ma YX, Zhang XL, Lu Y, Lv J, Zhu N, Hu LH (2021) Effect of transverse flow on flame spread and extinction over polyethylene-insulated wires. Proc Combust Inst 38:4727–4735. https://doi.org/10.1016/j.proci.2020.06.22810.1016/j.proci.2020.06.228 ↗
23. Kobayashi Y, Konno Y, Huang XY, Nakaya S, Tsue M, Hashimoto N, Fujita O, Fernandez-Pello C (2018) Effect of insulation melting and dripping on opposed flame spread over laboratory simulated electrical wires. Fire Saf J 95:1–10. https://doi.org/10.1016/j.firesaf.2017.10.00610.1016/j.firesaf.2017.10.006 ↗
24. Huang XY, Nakamura Y, Williams FA (2013) Ignition-to-spread transition of externally heated electrical wire. Proc Combust Inst 34:2505–2512. https://doi.org/10.1016/j.proci.2012.06.04710.1016/j.proci.2012.06.047 ↗
25. Wang X, He H, Zhao L, Fang J, Wang J, Zhang Y (2016) Ignition and flame propagation of externally heated electrical wires with electric currents. Fire Technol 52:533–546. https://doi.org/10.1007/s10694-015-0515-910.1007/s10694-015-0515-9 ↗
26. He H, Zhang Q, Wang X, Wang F, Zhao L, Zhang Y (2017) The influence of currents on the ignition and correlative smoke productions for PVC-insulated electrical wires. Fire Technol 53:1275–1289. https://doi.org/10.1007/s10694-016-0634-y10.1007/s10694-016-0634-y ↗
27. Zhang Y, Tang K, Liu Z, Chen Y (2021) Experimental study on thermal and fire behaviors of energized PE-insulated wires under overload currents. J Therm Anal Calorim 145:345–351. https://doi.org/10.1007/s10973-020-09745-110.1007/s10973-020-09745-1 ↗
28. Zhang Y, Zhang W, Li K, Tang K, Liu Z (2021) Dripping behavior effects on flame propagation along electrical wires under high currents. Fire Saf J 123:103368. https://doi.org/10.1016/j.firesaf.2021.10336810.1016/j.firesaf.2021.103368 ↗
29. Wang Z, Zhou T, Wei R, Wang J (2020) Experimental study of flame spread over PE-insulated single copper core wire under varying pressure and electric current. Fire Mater 44:835–843. https://doi.org/10.1002/fam.288210.1002/fam.2882 ↗
30. General Administration For National Market Supervision (2019) National Standardization Committee, GB/T19666-2019, General rules for flame retardant and refractory wire and cable. Standards Press of China, Beijing
31. Beneš M, Milanov N, Matuschek G, Kettrup A, Plaček V, Balek V (2004) Thermal degradation of PVC cable insulation studied by simultaneous TG-FTIR and TG-EGA methods. J Therm Anal Calorim 78:621–630. https://doi.org/10.1023/B:JTAN.0000046123.59857.ad10.1023/B:JTAN.0000046123.59857.ad ↗
32. Xie Q, Zhang H, Tong L (2010) Experimental study on the fire protection properties of PVC sheath for old and new cables. J Hazard Mater 179:373–381. https://doi.org/10.1016/j.jhazmat.2010.03.01510.1016/j.jhazmat.2010.03.015 ↗
33. Fisher RP, Stoliarov SI, Keller MR (2015) A criterion for thermally-induced failure of electrical cable. Fire Saf J 72:33–39. https://doi.org/10.1016/j.firesaf.2015.02.00210.1016/j.firesaf.2015.02.002 ↗
34. Uber C, Shekhar R, Felgner A, Koenders L, Gerlach U (2017) Experimental investigation of low-voltage spark ignition caused by separating electrodes. J Loss Prev Process Ind 49:822–831. https://doi.org/10.1016/j.jlp.2017.03.01510.1016/j.jlp.2017.03.015 ↗
35. Wang Z, Wei R, Ouyang D, Wang J (2020) Investigation on thermal stability and flame spread behavior of new and aged fine electrical wires. J Therm Anal Calorim 140:157–165. https://doi.org/10.1007/s10973-019-08778-510.1007/s10973-019-08778-5 ↗
36. Zhao L, Zhang Q, Tu R, Fang J, Wang J, Zhang Y (2020) Effects of electric current and sample orientation on flame spread over electrical wires. Fire Saf J 112:102967. https://doi.org/10.1016/j.firesaf.2020.10296710.1016/j.firesaf.2020.102967 ↗
37. Park SH, Lim SJ, Cha MS, Park J, Chung SH (2019) Effect of AC electric field on flame spread in electrical wire: variation in polyethylene insulation thickness and di-electrophoresis phenomenon. Combust Flame 202:107–118. https://doi.org/10.1016/j.CombustionandFlame.2019.01.00710.1016/j.CombustionandFlame.2019.01.007 ↗
38. Li Y, Sun Y, Gao Y, Sun J, Lyu HF, Yu T, Yang S, Wang Y (2022) Analysis of overload induced arc formation and beads characteristics in a residential electrical cable. Fire Saf J 131:103626. https://doi.org/10.1016/j.firesaf.2022.10362610.1016/j.firesaf.2022.103626 ↗
39. Huang XY, Nakamura Y (2020) A review of fundamental combustion phenomena in wire fires. Fire Technol 56:315–360. https://doi.org/10.1007/s10694-019-00918-510.1007/s10694-019-00918-5 ↗
40. He H, Zhang Q, Shi L, Li H, Huang D, Zhang Y (2021) Experimental study on the thermoplastic dripping and flame spread behaviors of energized electrical wire under reduced atmospheric pressure. Polymers 13:346. https://doi.org/10.3390/polym1303034610.3390/polym13030346 ↗
41. He H, Zhang Q, Tu R, Zhao L, Liu J, Zhang Y (2016) Molten thermoplastic dripping behavior induced by flame spread over wire insulation under overload currents. J Hazard Mater 320:628–634. https://doi.org/10.1016/j.jhazmat.2016.07.07010.1016/j.jhazmat.2016.07.070 ↗
42. Tang K, Wu S, Zhang H, Li C, Yuan B, Zhang Y (2022) Analysis of heat transfer during flame spread over energized-wire under high currents. Int J Therm Sci 171:107191. https://doi.org/10.1016/j.ijthermalsci.2021.10719110.1016/j.ijthermalsci.2021.107191 ↗
43. Setyadi P, Kusumohadi C, Triyono T, Yoga N, Sutrisno H (2021) Fire ignition of NYM cable shield vapor on excessive electric current in multi core cables. IOP Conf Ser 1098:06208710.1088/1757-899X/1098/6/062087 ↗
44. Moorhouse J, Williams A, Maddison TE (1974) An investigation of the minimum ignition energies of some C1 to C7 hydrocarbons. Combust Flame 23:203–213. https://doi.org/10.1016/0010-2180(74)90058-310.1016/0010-2180(74)90058-3 ↗
45. Lee TW, Jain V, Kozola S (2001) Measurements of minimum ignition energy by using laser sparks for hydrocarbon fuels in air: propane, dodecane, and jet-A fuel. Combust Flame 125:1320–1328. https://doi.org/10.1016/S0010-2180(01)00248-610.1016/S0010-2180(01)00248-6 ↗
46. Wu H, Li X (2006) Calculation of maximum arc energy for low voltage power systems. In: 2006 IEEE PES power systems conference and exposition, Atlanta, pp 1627–163010.1109/PSCE.2006.296156 ↗
47. Lim SJ, Kim MK, Park J, Fujita O, Chung SH (2015) Flame spread over electrical wire with AC electric fields: internal circulation, fuel vapor-jet, spread rate acceleration, and molten insulator dripping. Combust Flame 162:1167–117510.1016/j.combustflame.2014.10.009 ↗
48. Babrauskas V (2003) Ignition handbook. Fire Science Publishers, Issaquah
49. Sun PY, Rodriguez A, Kim WI, Huang XY, Fernandez-Pello C (2021) Effect of external and internal heating on the flame spread and phase change of thin polyethylene tubes. Int J Therm Sci 168:107054. https://doi.org/10.1016/j.ijthermalsci.2021.10705410.1016/j.ijthermalsci.2021.107054 ↗
50. Du JH, Tu R, Zeng Y, Pan L, Zhang RC (2017) An experimental study on the thermal characteristics and heating effect of arc-fault from Cu core in residential electrical wiring fires. PLoS ONE 12:e0182811. https://doi.org/10.1371/journal.pone.018281110.1371/journal.pone.0182811 ↗
51. Huang XJ, Zhu H, Peng L, Zheng Z, Zeng W, Bi K, Cheng C, Chow W (2019) Thermal characteristics of vertically spreading cable fires in confined compartments. Fire Technol 55:1849–1875. https://doi.org/10.1007/s10694-019-00833-910.1007/s10694-019-00833-9 ↗
52. Hu L, Zhang Y, Yoshioka K, Izumo H, Fujita O (2015) Flame spread over electric wire with high thermal conductivity metal core at different inclinations. Proc Combust Inst 35:2607–2614. https://doi.org/10.1016/j.proci.2014.05.05910.1016/j.proci.2014.05.059 ↗
53. Kobayashi Y, Nakaya S, Tsue M, Takahashi S (2021) Flame spread over polyethylene-insulated copper and stainless-steel wires at high pressure. Fire Saf J 120:103062. https://doi.org/10.1016/j.firesaf.2020.10306210.1016/j.firesaf.2020.103062 ↗
54. Meinier R, Fellah M, Sonnier R, Zavaleta P, Suard S, Ferry L (2021) Ignition and charring of PVC-based electric cables. Fire Technol 58:689–70710.1007/s10694-021-01168-0 ↗
55. Xie Q, Gong T, Huang XY (2021) Fire zone diagram of flame-retardant cables: ignition and upward flame spread. Fire Technol 57:2643–265910.1007/s10694-021-01133-x ↗