Development of design equations for ultra-high strength steel CHS columns under transient fire conditions considering thermal creep and axial restraint effects

Despite their potential for widespread structural applications, the use of ultra-high strength steel (UHSS) members in buildings is currently hindered by the lack of suitable design relationships for these components. In response to this technical gap, this paper presents design equations for Grade 1200 UHSS circular hollow section (CHS) columns under transient fire conditions. The design relationships are derived from an extensive parametric study on the in-fire behavior of UHSS tube columns using advanced finite element (FE) simulations in ABAQUS software. However, to verify the FE modeling framework, experiments are also conducted on axially-compressed UHSS tube specimens. The thermal creep of the UHSS tubes is explicitly included as a user-defined subroutine in the modeling by a robust creep model exclusively developed for the UHSS material under transient fire conditions. In addition to the utilization factor, the effects of non-dimensional slenderness, heating rate (or thermal creep), and axial restraint stiffness ratio are also studied and considered in the design equations obtained for the UHSS CHS columns. Finally, it is shown that the present design relationships can predict the columns' buckling and failure temperatures with a maximum absolute error (MAE) of 4%.