New Design of a Boost Drive Circuit with an Energy Recovery Function for the Piezoelectric Jacquard Needle
Source abstract
Abstract
Aiming at the technical bottlenecks existing in the current warp knitting machine control system such as jacquard drive circuit, the design method of self-boosting power supply circuit integrated with jacquard driver is proposed for the embedded warp knitting machine jacquard control system for miniaturization design. The voltage boost circuit designed can boost the low voltage from the input of the working power supply to the high voltage for the output to drive the oscillation of the piezoelectric ceramic jacquard needles. Since the circuit adopts energy storage inductance instead of current-limiting resistor to optimize the driving circuit, it not only limits the forward charging current of the piezoelectric ceramic, but also effectively realize the energy recovery function. The effectiveness of the design method is verified by simulation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Industrial Vision Systems and Defect Detection · Advanced Sensor and Energy Harvesting Materials · Wireless Sensor Networks and IoT
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
China, Fujian, Sanming University, College of Mechanical and Electrical Engineering
References (15)
Show source-provided references
1. HU Qiaoe, ZHANG Awei, et al. Research on Fuzzy Electronic Let-Off Device. Journal ofXi’an University of Engineering Science and Technology 2006; 20(1): 24-30.
2. YANG Jiancheng, JIANG Xiuming, ZHOU Guoqing, et al. Application of Fuzzy-PIDCompound Control on Loom Electronic Let-Off and Take-Up. Journal of Textile Research2008; 29(4): 115-118.
3. WANG Jianrong, PENG Yongsheng. Warp Knitting Electronic Let-Off System: China,200610039512.4. 2006-09-06.
4. REN Wen, LAI Sencai. Intelligent Multi-Speed Electronic Let-Off System for Warp Knitting:China, 201220288643. 7. 2013-01-23.
5. XIA Fenglin，JIANG Gaoming，GE Mingqiao. Moving Precision Analysis of ElectronicShogging System on High Speed Warp Knitting Machine. Journal of Textile Research 2009;30(3): 106-110.
6. WANG Minqi, WANG Hanzhu, HU Xiaowei, et al. A Warp Knitting Machine with ElectronicShogging: China, 201210151856.X . 2012-10-10.
7. JIANG Jianjun, JIANG GAOming, XIA Linfeng. Research on Working Principle of Warp-Knitting Piezoelectric Jacquard System. Knitting Industries 2009; 3: 23-25.
8. LIU Zhenhua, LI Ruifeng, XU Liping. Analysis of the Deflection and Structure of PiezoelectricJacquard Knitted – Selecting Element. Piezoelectrics & Acoustooptics 2012; 34(2): 229-232.
9. SUN Jialiang. Piezoelectric Jacquard Guide-Bars Drive Control System: China,201110033921.4[P]. 2011-10-19.
10. YE Xiaogang, LI Jiangtao. A Kind Of On-Line Detection System And Implementation MethodOf The Loom Stare Flaw Based On Machine Vision: China, 201210324640.9[P]. 2012-12-12.
11. SHI Pengfei, BAI Ruilin, YANG Wenhao, et al. Broken Yarn Detection System On WarpingMachine Based On Machine Vision[J]. Journal of Donghua University (Natural Science), 2011,37(6): 750-755.
12. JIANG Gaoming, CONG Hailian. Development and Application of the Warp Knitting CADTechnology[J]. China Textile Leader 2003; 2: 56-58.
13. Michalak A, Mikołajczyk Z. The Concept Of Building A Warp Knitting Machine for 3DKnitting Desing and Construction as Sumptions (In Polish). In: XVI Scientific Conference of theFaculty of Material Technologies and Textile Design 2013,TUL.
14. Michalak A, Kuchar M, Mikołajczyk Z. Simulation Tests of the Feeding System Dynamics on aWarp Knitting Machine with Four Needle Bars. FIBRES & TEXTILES in Eastern Europe 2015;23, 4(112): 127-133. DOI: 10.5604/12303666.1152744.
15. Ren W, Lai S. Embedded Electronic Jacquard Guide Bar: A New Approach to Warp KnittingUsing the Machine Jacquard Control System. FIBRES & TEXTILES in Eastern Europe 2018;26, 6(132): 95-101. DOI: 10.5604/01.3001.0012.5172.10.5604/01.3001.0012.5172 ↗