journal article·2021-10-31Open access

Comparative Analysis of the Performances of Six Taguchi-Based Multi-Response Optimisation Techniques for Product Development in Textiles

Naseer Ahmad, Shahid Kamal, Zulfiqar Ali Raza, Muhammad Zeshan, Sharjeel Abid, Zafar Javed, Mehmet Karahan

Fibres and Textiles in Eastern Europe· Volume 29· Issue 5(149)

Abstract

Researchers are using different statistical techniques for process optimisation and product development both in academia and industries. Similarly, several statistical tools are being employed in the textile industry for process optimisation during the manufacturing of different products. The purpose of this study was to analyse different Taguchi-based techniques in the multi-response optimisation of selected industrial processes and then to generalise the outcomes. Herein, six different Taguchi-based multi-response optimisation techniques, including grey relational analysis (GRA), the weighted signal-to-noise (WSN) ratio, principal component analysis, VIKOR (VlseKriterijumska Optimizacija I Kompromisno Resenje), the multiple response signal-to-noise ratio, and Fuzzy logic were compared against three data sets of industrial processes. The researchers herein optimised cotton dyeing, the finishing of textile to make them oleo-hydrophobic, and the production of rhamnolipids (bio-surfactants). The results demonstrated that the Fuzzy logic-based Taguchi method gave the best optimisation amongst all the other approaches, followed by GRA and WSN for all the selected processes. The said statistical techniques were applied to specific textile and biotechnological processes. The outcomes of this study can help researchers in practical implementation in industrial sectors. In this study, a comparative analysis of the performances of six Taguchi-based multi-response optimisation techniques was conducted for potential industrial processes, particularly textile processing .
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Optimal Experimental Design Methods · Spectroscopy and Chemometric Analyses · Industrial Vision Systems and Defect Detection

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Pakistan, Faisalabad, National Textile University, Department of Applied Sciences

Pakistan, Lahore, University of the Punjab, College of Statistical and Actuarial Sciences

Pakistan, Faisalabad, National Textile University, School of Engineering and Technology, Department of Textile Engineering

Pakistan, Faisalabad, National Textile University, Department of Design

Turkey, Görükle-Bursa, Uludağ University, Vocational School of Technical Sciences

References (25)

Show source-provided references
1. Ardakani MK, Noorossana R. A New Optimization Criterion for Robust Parameter Design- The Case of Target is Best. Int J Adv Manuf Technol 2008; 38: 851–859.10.1007/s00170-007-1141-6 ↗
2. Rao RS, Kumar CG, Prakasham RS, et al. The Taguchi Methodology as a Statistical Toolfor Biotechnological Applications: A Critical Appraisal. Biotechnology Journal 2008; 3:510–523.10.1002/biot.200700201 ↗
3. Ryan TP. Taguchi’s Quality Engineering Handbook. Epub Ahead of Print 2005. DOI:10.1080/00224065.2005.11980326.10.1080/00224065.2005.11980326 ↗
4. Wang Y, Zhao YF. Investigation of Sintering Shrinkage in Binder Jetting AdditiveManufacturing Process. Procedia Manuf 2017; 10: 779–790.10.1016/j.promfg.2017.07.077 ↗
5. Chang C-L, Hsu C-H. Multi-Criteria Analysis via the VIKOR method for PrioritizingLand-Use Restraint Strategies in the Tseng-Wen Reservoir Watershed. J Environ Manage2009; 90: 3226–3230.10.1016/j.jenvman.2009.04.020 ↗
6. Chiang JS, Wu PL, Chiang SD, et al. Introduction to Grey System Theory, 1998.
7. John B. Simultaneous Optimization of Multiple Performance Characteristics ofCarbonitrided Pellets: A Case Study. Int J Adv Manuf Technol 2012; 61: 585–594.10.1007/s00170-011-3751-2 ↗
8. Azadeh A, Nazari-Shirkouhi S, Hatami-Shirkouhi L, et al. A Unique Fuzzy Multi-CriteriaDecision Making: Computer Simulation Approach for Productive Operators’ Assignmentin Cellular Manufacturing Systems with Uncertainty and Vagueness. Int J Adv ManufTechnol 2011; 56: 329–343.10.1007/s00170-011-3186-9 ↗
9. Gauri SK, Chakravorty R, Chakraborty S. Optimization of Correlated Multiple Responsesof Ultrasonic Machining (USM) Process. Int J Adv Manuf Technol 2011; 53: 1115–1127.10.1007/s00170-010-2905-y ↗
10. Khaw JFC, Lim BS, Lim LEN. Optimal Design of Neural Networks using the TaguchiMethod. Neurocomputing 1995; 7: 225–245.10.1016/0925-2312(94)00013-I ↗
11. Pandey AK, Dubey AK. Taguchi Based Fuzzy Logic Optimization of Multiple QualityCharacteristics in Laser Cutting of Duralumin Sheet. Opt Lasers Eng 2012; 50: 328–335.10.1016/j.optlaseng.2011.11.005 ↗
12. Yang T, Chou P. Solving A Multiresponse Simulation-Optimization Problem withDiscrete Variables using a Multiple-Attribute Decision-Making Method. Math ComputSimul 2005; 68: 9–21.10.1016/j.matcom.2004.09.004 ↗
13. Liao HC. A Data Envelopment Analysis Method for Optimizing Multi-Response Problemwith Censored Data in the Taguchi Method. In: Computers And Industrial Engineering.Elsevier Ltd 2004; pp. 817–835.10.1016/j.cie.2004.05.012 ↗
14. Wurl RC, Albin SL. A Comparison of Multiresponse Optimization Sensivity to ParameterSelection. Qual Eng 1999; 11: 405–415.10.1080/08982119908919257 ↗
15. Gauri SK, Chakraborty S. A Study on the Performance of some Multi-ResponseOptimisation Methods for WEDM Processes. Int J Adv Manuf Technol 2010; 49: 155–166.10.1007/s00170-009-2391-2 ↗
16. Gauri SK, Pal S. Comparison of Performances of Five Prospective Approaches for theMulti-Response Optimization. Int J Adv Manuf Technol 2010; 48: 1205–1220.10.1007/s00170-009-2352-9 ↗
17. Krishnaiah K, Shahabudeen P. Applied Design of Experiments and Taguchi Methods,https://books.google.com.pk/books?id=hju9JYVhfV8C&printsec=frontcover#v=onepage&q&f=false (2012, accessed 10 September 2020).
18. Ahmad N, Kamal S, Raza ZA, et al. Multi-Objective Optimization in the Development ofOil and Water Repellent Cellulose Fabric Based on Response Surface Methodology andthe Desirability Function. Mater Res Express 2017; 4: 035302.10.1088/2053-1591/aa5f6a ↗
19. Umair M, Shaker K, Ahmad N, et al. Simultaneous Optimization of Woven FabricProperties Using Principal Component Analysis. J Nat Fibers 2017; 14: 846–857.10.1080/15440478.2017.1279994 ↗
20. Ahmad N, Kamal S, Raza ZA, et al. Multi-Response Optimization in the Development ofOleo-Hydrophobic Cotton Fabric using Taguchi Based Grey Relational Analysis. ApplSurf Sci 2016; 367: 370–381.10.1016/j.apsusc.2016.01.165 ↗
21. Raza ZA, Rehman A, Hussain MT, et al. Production of Rhamnolipid Surfactant and ItsApplication in Bioscouring of Cotton Fabric. Carbohyd Res 2014; 391: 97-105.10.1016/j.carres.2014.03.009 ↗
22. Rehman A, Raza ZA, Masood R, et al. Multi-Response Optimization in EnzymaticDesizing of Cotton Fabric Under Various Chemo-Physical Conditions Using a TaguchiApproach. Cellulose 2015; 22: 2107–2116.10.1007/s10570-015-0598-y ↗
23. Kabir SM, Tania IS, Uddin Z. Effects of Resin Treatments on the Quality of Cotton FabricDyed with Reactive Dye. FIBRES & TEXTILES in Eastern Europe 2018; 26, 1(127):102-107. DOI: 10.5604/01.3001.0010.7804.10.5604/01.3001.0010.7804 ↗
24. Abid S, Hussain T, Nazir A, et al. Simultaneous Fixation of Wrinkle-Free Finish andReactive Dye on Cotton Using Response Surface Methodology. Cloth Text Res J 2018;36: 119–132.10.1177/0887302X17747048 ↗
25. Mukthy AA, Yousuf A, Anwarul M. Effects of Resin Finish on Cotton Blended WovenFabrics. Int J Sci Eng Technol 2014; 990: 983–990.